최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Composites. Part B, Engineering, v.112, 2017년, pp.15 - 21
Kim, Kwan-Woo (R&D Division, Korea Institute of Carbon Convergence Technology, Jeonju 54853, Republic of Korea) , Kim, Dong-Kyu (R&D Division, Korea Institute of Carbon Convergence Technology, Jeonju 54853, Republic of Korea) , Kim, Byoung-Suhk (Department of Organic Materials & Fiber Engineering, Chonbuk National University, Jeonju 54896, Republic of Korea) , An, Kay-Hyeok (Department of Advanced Nano Materials, Jeonju University, Jeonju 22212, Republic of Korea) , Park, Soo-Jin (Department of Chemistry, Inha University, Incheon 55069, Republic of Korea) , Rhee, Kyong Yop (Department of Mechanical Engineering, Kyung Hee University, Yongin 17104, Republic of Korea) , Kim, Byung-Joo (R&D Division, Korea Institute of Carbon Convergence Technology, Jeonju 54853, Republic of Korea)
In this work, the composition effects of a nylon6 and epoxy blend system on the cure behaviors and mechanical properties of carbon fiber-reinforced nylon6/epoxy composites were investigated. Ethanol was used as a melting agent for nylon6 (alcohol-soluble nylon), and the content of nylon6 in the mixt...
Carbon Fitzer 27 5 621 1989 10.1016/0008-6223(89)90197-8 PAN-based carbon fibers-present state and trend of the technology from the viewpoint of possibilities and limits to influence and control the fiber properties by the process parameters
Adv Mater Ruland 2 528 1990 10.1002/adma.19900021104 Carbon fibers
J Fluor Chem Du Toit 98 107 1999 10.1016/S0022-1139(99)00091-3 Surface fluorination of polypropylene 1. Characterisation of surface properties
J Colloid Interface Sci Park 237 91 2001 10.1006/jcis.2001.7441 Interfacial characteristics and fracture toughness of electrolytically Ni-plated carbon fiber-reinforced phenolic resin matrix composites
J Korean Ind Eng Chem Park 14 176 2003 Studies on cure behavior and thermal stability of DGEBA/PMR-15 blend system
Polym J Kim 29 759 1997 10.1295/polymj.29.759 Effects of N-benzylpyrazinium hexafluoroantimonate concentration on rheological properties in cationic epoxy cure system
Compos Struct Alam 132 898 2015 10.1016/j.compstruct.2015.06.065 Effect of bond length on the behavior of CFRP strengthened concrete-filled steel tubes under transverse impact
Compos Sci Technol Tsotra 64 2385 2004 10.1016/j.compscitech.2004.05.003 Short carbon fiber reinforced epoxy resin/polyaniline blends: their electrical and mechanical properties
J Appl Polym Sci Kim 72 1055 1999 10.1002/(SICI)1097-4628(19990523)72:8<1055::AID-APP10>3.0.CO;2-8 Effects of mixing temperatures on the morphology and toughness of epoxy/polyamide blends
J Mater Sci Pearson 21 2462 1986 10.1007/BF01114294 Toughening mechanisms in elastomer-modified epoxies 1 Mechanical studies
J Mater Sci Pearson 21 2475 1986 10.1007/BF01114294 Toughening mechanisms in elastomer-modified epoxies 2 Microscopy studies
J Mater Sci Pearson 24 2571 1989 10.1007/BF01174528 Toughening mechanisms in elastomer-modified epoxies 3 the effect of cross-link density
Compos Part B Jhou 71 17 2015 10.1016/j.compositesb.2014.10.053 Crashworthiness characteristics of a carbon fiber reinforced dual-phase epoxy-polyurea hybrid matrix composite
Mater Sci Eng A Richard 352 344 2003 10.1016/S0921-5093(02)00895-X Reinforcement of rubbery epoxy by carbon nanofibres
Nanosci Nanotechnol Kim 14 9097 2014 10.1166/jnn.2014.10095 Effects of oxyfluorination on surface and mechanical properties of carbon fiber-reinforced polarized-polypropylene matrix composites
Polymer Zhong 39 3451 1998 10.1016/S0032-3861(97)10237-3 Miscibility and cure kineticcs of nylon/epoxy resin reactive blends
Compos Part B Xu 95 423 2016 10.1016/j.compositesb.2016.04.019 Temperature effect on nano-rubber toughening in epoxy and epoxy/carbon fiber laminated composites
Polymer Poncet 40 6811 1999 10.1016/S0032-3861(99)00104-4 Monitoring phase separation and reaction advanccment in situ in thermoplastic/epoxy blends
Skeist 331 1962 Handbook of adhesives
Houwink 1965 Adhesion and adhesives
Patric 1967 Treatise on adhesion and adhesives
Kohan 1995 Nylon plastics handbook
J Adhes Homer 32 141 1990 Cathodic Delamination of an epoxy/polyamide coating from steel
Corrosion Kosek 51 861 1995 10.5006/1.3293563 Effect of porosity on resistance of epoxy coatings to cold-wall blistering
Compos Part B Lim 41 67 2010 10.1016/j.compositesb.2009.03.006 Impact fracture behaviour of nylon 6-based ternary
Standard test method for determining the Charpy impact resistance of notched specimens of plastics. ASTM D6110.
Thermochim Acta Xia 427 129 2005 10.1016/j.tca.2004.09.002 Non-isothermal crystallization behavior of low-density polyethylene/copper nanocomposites
Bull Chem Soc Jpn Ozawa 38 1881 1965 10.1246/bcsj.38.1881 A new method of analyzing thermogravimetric data
J Res Natl Bur Stds Kissinger 57 217 1956 10.6028/jres.057.026 Variation of peak temperature with heating rate in differential thermal analysis
Eur Polym J Liu 39 2359 2003 10.1016/S0014-3057(03)00166-6 Crystallization, morphology, and dynamic mechanical properties of poly(trimethylene terephthalate)/clay nanocomposites
Eur Polym J Liu 38 1383 2002 10.1016/S0014-3057(01)00304-4 Non-isothermal crystallization behaviors of polyamide6/clay nanocomposites
Polymer Weng 44 8119 2003 10.1016/j.polymer.2003.10.028 Crystallization kinetics and melting behaviors of nylon 6/foliated graphite nanocomposite
Prime 1981 Thermal characterization of polymeric materials
Anal Chem Doyle 33 1 77 1961 10.1021/ac60169a022 Estimating thermal stability of experimental polymers by empirical thermogravimetric Analysis
Text Sci Eng Park 38 14 2001 Studies on the thermal stability and electrical properties of conductive acetylene black/high density polyethylene composites
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.