Ayoubi, Y.
(Dept. GMSC, Pprime Institute, CNRS - University of Poitiers - ENSMA - UPR 3346)
,
Laribi, M.A.
(Dept. GMSC, Pprime Institute, CNRS - University of Poitiers - ENSMA - UPR 3346)
,
Courrèges, F.
(Xlim Research Institute of the University of Limoges)
,
Zeghloul, S.
(Dept. GMSC, Pprime Institute, CNRS - University of Poitiers - ENSMA - UPR 3346)
,
Arsicault, M.
(Dept. GMSC, Pprime Institute, CNRS - University of Poitiers - ENSMA - UPR 3346)
Abstract Making robots collaborate safely with humans has created a new design paradigm involving the biomimetic mechanical behavior of robots’ joints. However, few authors have contributed to the problems of safety in pure linear motion, i.e. a prismatic joint, in contrast to rotary motion. ...
Abstract Making robots collaborate safely with humans has created a new design paradigm involving the biomimetic mechanical behavior of robots’ joints. However, few authors have contributed to the problems of safety in pure linear motion, i.e. a prismatic joint, in contrast to rotary motion. The contribution of this work is to present a new design that is capable of achieving, passively, an implementation of nonlinear elastic behavior for prismatic joints—the so-called Prismatic Compliant Joint (PCJ). This new device is based on the association of a six-bar mechanism with a linear spring. Hence, this structure generates a nonlinear stiffness behavior under a specified external force. The elastic characteristics of the PCJ are derived from a generic biological muscle mechanical behavior model and then customized according to the force-safety criteria of physical Human/Robot Interaction (pHRI) into a Hunt–Crossley contact model. A further investigation is carried out, via simulation, to verify the shock absorption capacity of the PCJ with a dummy head obstacle. In order to fit the PCJ response curve to the established safety measures, an optimization based on a genetic algorithm method is employed to tune the PCJ’s intrinsic parameters subject to some chosen constraints. Highlights Prismatic Compliant Joint (PCJ). Safe physical human/robot interaction. Biomimetic mechanical behavior of robots’ joints. Force-safety criteria of physical Human/Robot Interaction. Optimization based on a genetic algorithm method.
Abstract Making robots collaborate safely with humans has created a new design paradigm involving the biomimetic mechanical behavior of robots’ joints. However, few authors have contributed to the problems of safety in pure linear motion, i.e. a prismatic joint, in contrast to rotary motion. The contribution of this work is to present a new design that is capable of achieving, passively, an implementation of nonlinear elastic behavior for prismatic joints—the so-called Prismatic Compliant Joint (PCJ). This new device is based on the association of a six-bar mechanism with a linear spring. Hence, this structure generates a nonlinear stiffness behavior under a specified external force. The elastic characteristics of the PCJ are derived from a generic biological muscle mechanical behavior model and then customized according to the force-safety criteria of physical Human/Robot Interaction (pHRI) into a Hunt–Crossley contact model. A further investigation is carried out, via simulation, to verify the shock absorption capacity of the PCJ with a dummy head obstacle. In order to fit the PCJ response curve to the established safety measures, an optimization based on a genetic algorithm method is employed to tune the PCJ’s intrinsic parameters subject to some chosen constraints. Highlights Prismatic Compliant Joint (PCJ). Safe physical human/robot interaction. Biomimetic mechanical behavior of robots’ joints. Force-safety criteria of physical Human/Robot Interaction. Optimization based on a genetic algorithm method.
F. Tobe, Why Co-Bots Will Be a Huge Innovation and Growth Driver for Robotics Industry. [Online]. Available: http://spectrum.ieee.org/automaton/robotics/industrial-robots/collaborative-robots-innovation-growth-driver.
10.1109/ROBOT.2008.4543452 S. Wolf, G. Hirzingher, G. Hirzinger, A new variable stiffness design: maching requirements of the next robot generation, in: Icra08, 2008, pp. 1741-1746.
J.L. Blanco, D. Garc, AVASTT: A new variable stiffness actuator with torque threshold, in: ROBOT2013: First Iberian Robotics Conference 2014, vol. 252.
10.1109/ROBOT.2008.4543528 G. Grioli, R. Schiavi, S. Sen, A. Bicchi, VSA-II: Variable stiffness actuation for safe and performing robots interacting with humans, in: IEEE Conf. Robot. Autom., 2008, pp. 2171-2176.
10.1109/IROS.1995.525827 G.A. Pratt, M.M. Williamson, Series elastic actuators, in: IEEE/RSJ Int. Conf. Intell. Robot. Syst. ’Human Robot Interact. Coop. Robot. vol. 1, no. 1524, 1995, pp. 399-406.
Int. J. Adv. Robot. Syst. Corral 11 1 1 2014 Forward and inverse dynamics of the biped PASIBOT
Artif. Life Pfeifer 11 1-2 99 2005 10.1162/1064546053279017 New robotics: Design principles for intelligent systems
10.1109/ROBOT.2010.5509662 O. Eiberger, S. Haddadin, M. Weis, A. Albu-Schaffer, G. Hirzinger, On joint design with intrinsic variable compliance: Derivation of the DLR QA-joint, in: Proc. - IEEE Int. Conf. Robot. Autom., 2010, pp. 1687-1694.
10.1109/BIOROB.2006.1639223 K. Koganezawa, T. Inaba, T. Nakazawa, Stiffness and angle control of antagonistially driven joint, in: Proc. First IEEE/RAS-EMBS Int. Conf. Biomed. Robot. Biomechatronics, 2006, BioRob 2006, vol. 2006, 2006, pp. 1007-1013.
Mech. Mach. Theory English 34 1 7 1999 10.1016/S0094-114X(98)00026-3 Mechanics and stiffness limitations of a variable stiffness actuator for use in prosthetic limbs
J. Mech. Robot. Hao 7 4 41016 2015 10.1115/1.4029556 Nonlinear analytical modeling and characteristic analysis of a class of compound multibeam parallelogram mechanisms
Mech. Mach. Theory Gonzalez Rodriguez 46 12 1970 2011 10.1016/j.mechmachtheory.2011.07.002 Design of an adjustable-stiffness spring: Mathematical modeling and simulation, fabrication and experimental validation
10.1109/AIM.2015.7222684 T. Wu, Design and analysis of a linear elastic mechanism with adjustable stiffness, 2015, pp. 1084-1089.
HIC Tolerance Levels Correlated To Brain Injury. [Online]. Available: http://www.eurailsafe.net/subsites/operas/HTML/appendix/Table14.htm. (Accessed 03 June 2015)).
I. 15066 ISO TC 184/SC2/WG3, Robots and Robotic Devices -Industrial Safety Requirements Collaborative Industrial Robots, 2012.
S. Haddadin, A. Albu-Schaffer, G. Hirzinger, The role of the robot mass and velocity in physical human-robot interaction - Part I: Non-constrained blunt impacts, in: Proc. - IEEE Int. Conf. Robot. Autom. no. 11838, 2008, pp. 1331-1338.
J. Comput. Nonlinear Dyn. Lopez-Martinez 9 1 1 2013 A flexible multibody model of a safety robot arm for experimental validation and analysis of design parameters
10.4271/892440 S.W. Rouhana, D.C. Viano, E.A. Jedrzejczak, J.D. McCleary, Assessing Submarining and Abdominal Injury Risk in the Hybrid III Family of Dummies, SAE Technical Paper 1989.
Biol. Cybernet. Lan 71 2 123 1994 10.1007/BF00197315 Optimal control of antagonistic muscle stiffness during voluntary movements
10.1007/978-3-319-22368-1_21 S.Z.F. Courreges, M.A. Laribi, M. Arsicault, An in vivo experiment to assess the validity of the log linearized hunt-crossley model for contacts of robots with the human abdomen, in: 4th IFToMM International Symposium on Robotics, 2015.
10.1109/IROS.2016.7759071 Y. Ayoubi, M.A. Laribi, F. Courreges, S. Zeghloul, M. Arsicault, A complete methodology to design a safety mechanism for prismatic joint implementation, in: IEEE/RSJ Int. Conf. Intell. Robot. Syst., 2016, pp. 304-309.
Viano 1999 The Biomedical Engineering HandBook, vol. 2 Biomechanics of chest and abdomen impact
J.-J.P.J.-J. Park, H.-S.K.H.-S. Kim, J.-B.S.J.-B. Song, Safe robot arm with safe joint mechanism using nonlinear spring system for collision safety, in: 2009 IEEE Int. Conf. Robot. Autom., 2009, pp. 3371-3376.
Int. J. Soc. Robot. Vermeulen 2 3 275 2010 10.1007/s12369-010-0048-9 Intrinsically safe robot arm: Adjustable static balancing and low power actuation
10.1109/ICRA.2011.5980282 J. Park, S. Haddadin, J. Song, A. Albu-sch, Designing optimally safe robot surface properties for minimizing the stress characteristics of human-robot collisions, in: Int. Conf. Robot. Autom., 2011, pp. 5413-5420.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.