In this paper, we propose an angle- and polarization-insensitive broadband metamaterial absorber with a resistive fan-shaped resonator. First, the symmetric fan-shaped resonator is designed, and four lumped resistors are loaded in the gap between each fan-shaped circular sector on the top layer to increase the bandwidth. Based on the circuit parameters, the periodic structure of the fan-shaped resonator is designed using full-wave analysis. The proposed absorber is fabricated using a printed circuit board process in a single layer. The experimental results indicate that an absorptivity value greater than 96% was achieved in the frequency range of 7-12.8 GHz for all polarization angles at normal incidence. Under oblique incidence, the measured absorptivity was greater than 90% in the range of 7-12.1 GHz when the incident angle varied from 0 degrees to 45 degrees in the transverse electric mode. In the transverse magnetic mode, the measured absorptivity was greater than 90% between 7.1 and 9.3 GHz when the incident angle varied from 0 degrees to 45 degrees. Published by AIP Publishing.
원문 PDF 다운로드
원문 URL 링크
원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다. 원문복사서비스 안내 바로 가기
DOI 인용 스타일