초록 ▼

A control system for a helicopter power plant with three power units driving the lifting rotor system through a main gearbox. Each power unit comprises a gas turbine engine of the gas-coupled type, a hydromechanical fuel control receiving electrical inputs to set a gas generator governor in the fuel

A control system for a helicopter power plant with three power units driving the lifting rotor system through a main gearbox. Each power unit comprises a gas turbine engine of the gas-coupled type, a hydromechanical fuel control receiving electrical inputs to set a gas generator governor in the fuel control, an engine electronic control, and various engine accessories. The operation of the power plant is normally controlled by the pilot through condition levers and switches on a control quadrant, through a pitch control by which the collective pitch of the rotor blades is controlled, and through a master beeper switch which is operable to trim the setting of an isochronous governor for the rotor system and the gas generator governors. The condition lever of each engine transmits a speed command signal through the electronic control of each power unit to its gas generator governor. A signal of collective pitch transmitted from the rotor control system to each engine electronic control is another factor in setting the governor. The power plant includes a power management control, the principal function of which is to equalilze the power outputs of the engines. It also includes the rotor isochronous governor. The power management control receives inputs of rotor system speed command and actual rotor speed and of the torques of the individual engines and transmits a governor trim signal to increase or decrease engine power to the several electronic controls. All signals are transmitted electrically between the rotor system, control panel, power management control, and engine electronic controls. A starting system for each engine includes logic circuits to test the operation of the electrical signal transmission system and closure of a fuel shutoff valve as a prerequisite to starting of the engine.

대표청구항 ▼

A control system for a combustion engine adapted for remote power control and starting and stopping of the engine comprising, in combination, engine control means generating a power output level command signal, load control means generating a load control signal effective to varY the power requireme

A control system for a combustion engine adapted for remote power control and starting and stopping of the engine comprising, in combination, engine control means generating a power output level command signal, load control means generating a load control signal effective to varY the power requirement of the load driven by the engine, fuel control means for the engine effective to meter fuel to the engine to control engine power level, a first servomechanism operative to adjust the fuel control means in response to the power output level command signal, a second servomechanism operative to adjust the fuel control means in response to the load control signal, means responsive to the power output command signal effective to transmit a first driving signal to the first servomechanism, means responsive to the load control signal effective to transmit a second driving signal to the second servomechanism; starting means connected to the engine operable to start the engine; and a fault detecting logic system connected to the two said signal generating and the two said signal transmitting means so as to receive the four said signals operative to compare the level of each of the four said signals with a corresponding preset signal level and connected to the starting means so as to inhibit starting of the engine upon detection of an undesired level of any of the four said signals.