이 특허를 인용한 특허 (27)

1. Larson, Lowell Van Lund, All-composite torque tube with metal eyelets.

   상세보기
2. Wright, Roger D.; Darais, Marcus A.; Yorgason, James A.; Loveless, Alan J.; Turner, Darrel G.; Nelson, David R., Apparatus and method for reinforcing a pressure vessel.

   상세보기
3. Wright,Roger D.; Darais,Marcus A.; Yorgason,James A.; Loveless,Alan J.; Turner,Darrel G.; Nelson,David R., Apparatus and method for reinforcing a pressure vessel.

   상세보기
4. Groeber Josef (Munich DEX), Apparatus for winding force transmitting elements of fiber reinforced materials.

   상세보기
5. Chornyj,Nicholas Anthony, Breathing apparatus and pressure vessels therefor.

   상세보기
6. Burhans Frank M. (Bellevue WA), Composite base structure and end fitting joint and method.

   상세보기
7. Anderson Jeffrey J. ; Nance Donald A. ; Mickelson Craig S., Composite cylinder termination.

   상세보기
8. Yasui Yoshiharu (Kariya JPX) Miyashita Yasuki (Kariya JPX) Anahara Meiji (Kariya JPX) Mita Yasuya (Kariya JPX), Drive shaft made of fiber reinforced composite material and method of manufacturing the same.

   상세보기
9. Schreiber, Karl; Grothaus, Raimund, Engine shaft in the form of a fiber-composite plastic tube with metallic driving and driven protrusions.

   상세보기
10. Brace, Michael Wayne; Tzioumis, Elias, Flange design for filament wound composite shaft.

    상세보기
11. Garnett Charles R. (Dahlgren VA) Henderson William M. (Ninde VA), Fragmentable warhead of modular construction.

    상세보기
12. Scanlon John F. (Roscoe IL) Warner Shawn A. (Rockford IL) Bengtson Alan D. (Rockford IL), Heat exchanger.

    상세보기
13. Holtrop John W. (Ridgecrest CA), Jam resistant fluid power actuator for ballistic-damage tolerant redundant cylinder assemblies.

    상세보기
14. Schimmler, Marc; Raeckers, Bernd; Kruse, Thomas; Schulze, Wolfgang, Method and a device for the manufacture of a fibre composite component, and a fibre composite component.

    상세보기
15. Wilson, Erich A.; Kipp, Michael D.; Ridges, Michael D., Method and system for forming composite geometric support structures.

    상세보기
16. Wilson, Erich A.; Kipp, Michael D.; Ridges, Michael D., Method and system for forming composite geometric support structures.

    상세보기
17. Thomas J. Walsh ; Joel D. Shaw ; Chris A. Lundberg ; Harris A. Reynolds, Jr., Method for attaching an ANSI stub-end flanged connector to a composite tubular member.

    상세보기
18. Dieterich Frank L. (5113 Miembro Laguna Hills CA 92653), Method for forming a flat band of parallel, contiguous strands.

    상세보기
19. Crabtree Michael L. (Arvada CO), Method for making an airspring and sleeve.

    상세보기
20. Peters Stanley T. (Mt. View CA) Kolek Robert L. (Cupertino CA) Guenther Rolf A. (Monte Sereno CA) Anderson Jeffrey J. (Mt. View CA) Marshall Clarence F. (Scottsdale AZ), Method of forming a joint between a tubular composite and a metal ring.

    상세보기
21. Hamm Robert A. (Bellevue WA) Whitener Philip C. (Seattle WA), Method of forming composite wound structure.

    상세보기
22. Abdullaev Gasan M. B. O. (ulitsa Saraikina ; 27 ; blok 2 Baku SUX) Maxudov Faramaz G. O. (ulitsa Gadzhibekova ; 33/35 Baku SUX) Kasimov Dzhangir A. K. O. (ulitsa Gadzhibekova ; 38 ; kv. 39 Baku SUX) , Method of manufacturing a flexible pipe.

    상세보기
23. Hoy Robert W. (Warsaw IN), Sound attenuator.

    상세보기
24. Reynolds, Jr., Harris A.; Shaw, Joel D.; Walsh, Thomas J.; Lundberg, Chris A., Structure for wound fiber reinforced plastic tubing and method for making.

    상세보기
25. Swozil Adolf (Khlenthal DEX), Tube bundle heat exchanger.

    상세보기
26. Protasov Viktor Dmitrievich,RUX ; Smyslov Vladimir Ivanovich,RUX ; Artjukhov Mikhail Sergeevich,RUX ; Davydov Alexandr Ivanovich,RUX ; Medvedev Eduard Borisovich,RUX ; Moroz Nikolai Grigorievich,RUX , Tubular load-bearing composite structure.

    상세보기
27. Sedgewick Richard D. (100 Horne St. Dover NH 03820), Zig-zag winding machine.

    상세보기
더보기