초록 ▼

A protective system interposed between a d-c power supply and an external load to isolate the supply from the load should the current drawn therefrom exceed a predetermined threshold value, the system distinguishing between a transitory overload and a continuous overload condition. The system includ

A protective system interposed between a d-c power supply and an external load to isolate the supply from the load should the current drawn therefrom exceed a predetermined threshold value, the system distinguishing between a transitory overload and a continuous overload condition. The system includes a current-sensing resistor connected in series with the supply and the load and a comparator responsive to the voltage drop developed across the resistor to produce an output signal which activates a relay to cut off the delivery of current to the load only when the current exceeds the threshold value. Also included is a sampling circuit which upon activation of the relay functions after a brief sampling interval to automatically de-activate the relay and thereby reconnect the supply to the load, causing the comparator to again determine whether the existing current drain is still excessive, in which event the relay is again activated and the sampling cycle repeated. A timing-out circuit operates in conjunction with the sampling circuit to permit the sampling cycle to continue repetitively as long as an overcurrent condition is sensed. However, at the conclusion of a timing-out period which is a multiple of the sampling interval, if an overcurrent condition still exists, the timing-out circuit acts to reactivate the relay and cut off the delivery of current to the load and to hold the relay in its activated state.

대표청구항 ▼

A protective system for a D-C power supply delivering current to an external load, the system distinguishing between a transitory overcurrent condition, in which case it functions to momentarily interrupt and then restore current flow, and a genuine overcurrent condition, in which case it functions

A protective system for a D-C power supply delivering current to an external load, the system distinguishing between a transitory overcurrent condition, in which case it functions to momentarily interrupt and then restore current flow, and a genuine overcurrent condition, in which case it functions to interrupt current flow and continuously maintain this interruption, said system comprising: A. a current-sensing resistor in series with said supply and said load, whereby the voltage drop developed across said resistor is proportional to the intensity of current drawn by the load; B. a voltage comparator responsive to said voltage drop to produce a low output signal when the drop reflects a current intensity below a predetermined threshold level and a high output signal when the drop reflects a current intensity at least equal to said level; C. a relay having normally closed contacts interposed between said resistor and said load, said contacts being opened when said relay is activated to interrupt current flow to the load, said relay being responsive to an activated by said high output signal; D. a sampling circuit rendered operative when said relay is activated and functioning after a brief sampling interval to de-activate the relay and thereby reconnect the supply to the load, at which point the comparator again determines whether the existing current drain is still excessive, in which event a high output signal is produced and the relay again activated to cut off the supply and to repeat the sampling cycle; and E. a timing-out circuit operating in conjunction with the sampling circuit and permitting sampling cycles to repeat as long as an overcurrent condition is sensed for a timing-out period which is a multiple of the sampling interval, the timing circuit at the conclusion of this period acting to reactivate the relay and cut off the delivery of current and to thereafter hold the relay in its activated state.