초록 ▼

A process for the manufacture of a bifunctional catalyst for the conversion of hydrocarbons, which contains a crystalline aluminosilicate of the type of the Y-zeolites as the acidic component and a noble metal as the hydrogenation component. The process constitutes a technologically simple way of ma

A process for the manufacture of a bifunctional catalyst for the conversion of hydrocarbons, which contains a crystalline aluminosilicate of the type of the Y-zeolites as the acidic component and a noble metal as the hydrogenation component. The process constitutes a technologically simple way of manufacturing bifunctional zeolite catalysts which have at least the same activity and the same life as the catalysts manufactured by conventional methods, coupled with great heat stability and exhibit activity in the presence of H2O, H2S and NH3 at relatively high temperatures.

대표청구항 ▼

A process for the manufacture of a bifunctional catalyst for the conversion of hydrocarbons, comprising a crystalline aluminosilicate of the type of the Y-zeolites as the acidic component and a metal of the noble metal group as the hydrogenation component, wherein the Y-zeolite has a molar ratio SiO

A process for the manufacture of a bifunctional catalyst for the conversion of hydrocarbons, comprising a crystalline aluminosilicate of the type of the Y-zeolites as the acidic component and a metal of the noble metal group as the hydrogenation component, wherein the Y-zeolite has a molar ratio SiO2/Al2O3 of from 4.8 to 6, the size of the zeolite crystals is from 0.5 to 2 m10-50% by weight of an amorphous aluminosilicate, containing 55-85% by weight of SiO2 and 45-15% by weight of Al2O3, and/or alumina as the binder, a carboxylic acid being used as a peptizing agent if required, after molding and drying at 100°-150°C. the sodium ions are replaced by ammonium ions by means of an ammonium salt solution until the sodium content is 0.2-0.4% by weight based on Na, after removal of the anions by washing the moldings are subjected to a deep-bed calcination at 570°- 770°C., with a rate of heating of about 2°C./min. up to 150°C., after which the moldings are heated very rapidly to 570°-770°C. and kept at this temperature for several hours, the moldings are then cooled in a dry atmosphere and impregnated with a noble metal salt solution, the volume and concentration of which precisely corresponds to the water adsorption capacity and the desired noble metal loading, and the laden moldings are then dried and subjected to a heat treatment at from 500°to 650°C. for several hours, under conditions selected so that no further decrease of the lattice constant occurs.