초록 ▼

An automatic chiller control is disclosed for providing a temperature sensitive load limit compressor control on a cooling water system, such as is used in buildings for air conditioning. The controller operates across at least one motor driven compressor and operates to adjust the vane inlet to a t

An automatic chiller control is disclosed for providing a temperature sensitive load limit compressor control on a cooling water system, such as is used in buildings for air conditioning. The controller operates across at least one motor driven compressor and operates to adjust the vane inlet to a typically centrifugal compressor. Control is provided in discrete steps responsive to changes in cooling water temperature as the water typically returns from a building. The control when operated in the automatic position starts the chiller at minimum possible power consumption. Increasing load or unload of the chiller is provided in incremental steps (for example 5% of full load) at preselected time intervals (for example 10 minutes) which are typically adjustable to any other desired time span. The control seeks the required motor power output without waste of power. Provision is made where the controller is operating the chiller at less than an efficient level (for example with vanes closed) to periodically shut the chiller down for an adjustable time as required. Options of overriding manual adjustment as well as manual adjustment only are included.

대표청구항 ▼

In the combination of a system for cooling including a loop for providing a flow of cooling fluid to a body to be cooled; a heat exchanger for cooling said fluid supplied to said loop; a compressor powered refrigeration cycle for cooling said exchanger having a flowing fluid for passing at least to

In the combination of a system for cooling including a loop for providing a flow of cooling fluid to a body to be cooled; a heat exchanger for cooling said fluid supplied to said loop; a compressor powered refrigeration cycle for cooling said exchanger having a flowing fluid for passing at least to an inlet from said exchanger to a compressor, a compressor outflow having thermal connection to a heat sink to dissipate heat from said loop and an inlet to said exchanger; and, means for throttling the inlet to said compressor to adjust the power required to operate said compressor, and a control for changing said means for throttling, the improvement in said control comprising: means for measuring the power output of said compressor in precisely predetermined increments of the full power output of the full power rating of said compressor; means for measuring the temperature of cooling fluid in said loop connected to said loop; thermostat means for determining whether the temperature in said loop is above or below a selected level and emitting respective above or below signals, said thermostat means connected to said means for measuring temperature; a first timer having a setting for a sequential timed interval for periodically communicating therethrough above and below signals from said thermostat means at the end of timed intervals; circuit means operable through said timer at the end of each said interval to select from said means for measuring the power output a greater incremental power setting in response to said above signal and a lower power setting in response to a below signal in said means for measuring the power; and, means operably connected between said power measuring mens and said means for throttling the inlet to said compressor for restricting the flow of refrigerant fluid to said compressor to maintain the power of said compressor at the selected increment of full power.