초록

A method of changing the shape change transition temperature range (TTR) of an object made from a nickel-titanium based shape change memory alloy by selection of the final annealing temperature.

대표청구항 ▼

In the process of forming an article with a shape change memory from a nickel-titanium based shape change memory alloy by annealing the object at a temperature above the transition temperature range (TTR) while the object is restrained in its permanent shape and then reshaping the object into anothe

In the process of forming an article with a shape change memory from a nickel-titanium based shape change memory alloy by annealing the object at a temperature above the transition temperature range (TTR) while the object is restrained in its permanent shape and then reshaping the object into another shape at a temperature below the transition temperature range, the improvement comprising: determining the annealing temperature which produces the desired transition temperature range for the article by performing the following steps in order: (1) forming the alloy into the desired permanent shape of the article; (2) restraining the article in this permanent shape; (3) annealing the article at a temperature above the TTR; (4) cooling the alloy down to a temperature below the TTR; (5) removing the restraint from the article; (6) forming the article into an intermediate shape taking care not to cause more than 7 percent deformation in the material; 7) determining the TTR by slowly heating up the article and observing the temperature range over which it recovers its permanent shape; and (8) deciding the next steps as follows: (a) if the TTR is lower than that desired, steps (2) through (8) are repeated using a higher annealing temperature in step (3); (b) if the TTR is higher than that desired, steps (1) through (8) are repeated using fresh alloy and a lower annealing temperature in step (3); but (c) if the TTR is that desired, the annealing temperature last used in step (3) is used in the process.