초록 ▼

A Solar Heating Panel that can be placed in a south facing window with the heat collecting fins facing outside, light will then hit the photovoltaic cells causing the fan to operate, air is drawn into the top of the panel by the fan which blows the air down into the panel and across the heat absorbi

A Solar Heating Panel that can be placed in a south facing window with the heat collecting fins facing outside, light will then hit the photovoltaic cells causing the fan to operate, air is drawn into the top of the panel by the fan which blows the air down into the panel and across the heat absorbing fins, as the air passes down across the heat collecting fins it will be heated, and will exit the panel at the bottom of said panel and into the room, thus heating it.

대표청구항 ▼

1. A Solar Heating Panel wherein said panel can be placed in a south facing window in order to heat a room, said panel comprising; a piece of clear plastic that will make up the front, left, right, and top sides of the panel; a piece of aluminum that will make up the back of said panel, said bac

1. A Solar Heating Panel wherein said panel can be placed in a south facing window in order to heat a room, said panel comprising; a piece of clear plastic that will make up the front, left, right, and top sides of the panel; a piece of aluminum that will make up the back of said panel, said back is a flat vertical sheet wherein there are at least seven fins rising vertically from the back, three fins that are the closest to said left side shall be at an angle of 80 degrees with respect to said back, another three fins that are the closest to said right side shall be at an angle of 80 degrees with respect to said back, a central degrees with respect to said back, a central fin between the three fins on the left and the three fins on the right and be at an angle of 90 degrees with respect to the back; said fins shall be painted flat black or be black anodized aluminum so that the air that the fan is pushing across the fins will be heated; an air input opening at the top back of said panel, so that a fan will draw in the warm air near the ceiling of said room to make it even warmer; an air output opening at the bottom back of said panel, so that the warm air will be exhausted from said panel into the cooler air near the floor of said room thereby warming said room; a piece of aluminum that starts at the front bottom of the fins and goes from the left to the right sides, that angles down so that it will end at the bottom back of the fins to create an air deflector in said panel; a fan having blades located just a few inches below the air input opening at the top back of said panel; a cone type air duct that starts at all of the inside sides just below the air input duct and gets smaller as it goes down until it reaches the fan blades at which time it gets bigger until it reaches all of the inside sides just above the top of the fins of said panel; a series of photovoltaic cells at the top front inside of said panel to provide electrical power to the fans motor; a stand which consists of a flat plate forming the bottom of said panel to stably support panel in an upright position; said panel shall be of an overall size that will enable one person to carry said panel.