초록 ▼

An apparatus and method for recycling or maintaining the latent heat of vaporization in work producing cycles such as the Rankine cycle by eliminating phase changes by replacing the condenser in such cycles with a compressor and restricting or limiting the expansion to reduce compressor work require

An apparatus and method for recycling or maintaining the latent heat of vaporization in work producing cycles such as the Rankine cycle by eliminating phase changes by replacing the condenser in such cycles with a compressor and restricting or limiting the expansion to reduce compressor work requirements. The standard compound turbine prevalent today consisting of a single Curtis stage in tandem with pressure compounded stages has been replaced with several two-row Curtis stages. An alternative embodiment utilizes one or several two-row Curtis stages and a condenser as in the Rankine cycle but limits the expansion, maintaining a relatively high pressure typical in exhaust from this type of turbines. The high pressure maintains the temperature of the condensate sufficiently high to eliminate feed water preheating. Sacrifice of low pressure output is compensated in both cases by salvaging latent heat of vaporization which would not be possible economically, if expansion carried to the maximum. Sufficient heat is added in the boiler to restore the vapor to its operating condition and to replace any excess heat removed at the final stage of the turbine.

대표청구항 ▼

A limited expansion vapor cycle apparatus comprising: means for heating a fluid to produce a vapor; means for deriving work from the vapor produced by said means for heating wherein the input pressure of said work deriving means is at a level such that the change in pressure of the vapor during oper

A limited expansion vapor cycle apparatus comprising: means for heating a fluid to produce a vapor; means for deriving work from the vapor produced by said means for heating wherein the input pressure of said work deriving means is at a level such that the change in pressure of the vapor during operation of said work deriving means occurs at a greater rate than the change of the volume of the vapor, said work deriving means having at least one stage; means for compressing vapor from the outlet end, wherein the compressor capacity is matched to the vapor output of the final stage of the work deriving means so that the pressure of the output is approximately one-half the final stage vapor inlet pressure, thereby restricting the expansion of the vapor output; means for cooling the vapor during compression; means for returning said compressed vapor to said means for heating; and means for pumping a condensate produced during compression to said means for heating.