초록 ▼

Thin polymer films containing small sized platelet type filler. The polymer has a melt index of from 0.01 to 10 grams per 10 minutes at 190°C. to 250°C. as measured on ASTM Test No. D-1238 at a load of 1000 to 2160 grams. The preferred polymer is polycaprolactam or high density polyethylene. There i

Thin polymer films containing small sized platelet type filler. The polymer has a melt index of from 0.01 to 10 grams per 10 minutes at 190°C. to 250°C. as measured on ASTM Test No. D-1238 at a load of 1000 to 2160 grams. The preferred polymer is polycaprolactam or high density polyethylene. There is from 10 to 50 percent of a platelet filler having an average equivalent diameter of from 1 to 8 micrometers, a maximum equivalent diameter of about 25 micrometers, and an average thickness of less than 0.5 micrometers. The preferred filler is talc. The film is from 10 to 100 micrometers thick and can be a single ply or a laminate.

대표청구항 ▼

A film having at least one layer comprising: high density polyethylene having a melt index of from 0.01 to 1.0 g/10 minutes at 190°C. as measured on ASTM Test No. D-1238 using a load of 2160 grams; and from 10 to 50 weight percent of a platelet filler wherein the filler has an average equivalent dia

A film having at least one layer comprising: high density polyethylene having a melt index of from 0.01 to 1.0 g/10 minutes at 190°C. as measured on ASTM Test No. D-1238 using a load of 2160 grams; and from 10 to 50 weight percent of a platelet filler wherein the filler has an average equivalent diameter of from 1 to 8 micrometers, a maximum diameter of 25 micrometers, and a thickness of less than 0.5 micrometers, the filler being homogeneously distributed through the film and substantially parallel to the plane of the film, the film being from 10 to 100 micrometers in thickness.