초록 ▼

A method is described for preparing hog fuel, other biomass, or peat for efficient burning and heat recovery in a water-wall boiler. The process requires drying the fuel to less that a 30% moisture content. The fuel is then pulverized to an upper particle size such that there are substantially no pa

A method is described for preparing hog fuel, other biomass, or peat for efficient burning and heat recovery in a water-wall boiler. The process requires drying the fuel to less that a 30% moisture content. The fuel is then pulverized to an upper particle size such that there are substantially no particles which will not burn in air suspension within the confines of the combustion zone and the boiler can meet emission requirements. Additionally, the pulverizing step is adjusted such that a fines portion of fuel is created of such size and in such amount that the fines portion readily self-ignites upon flame initiation. The fines provide sufficient ignition energy so that the entire flow of fuel burns without the necessity of the conventional fossil fuel support or pilot. The fuel is sized to burn in air suspension by injection into the boiler through a swirl stabilized-type burner. For one burner, not particularly optimized for burning wood, a suitable particle size range was found to comprise 65-100% less that 1000 microns and 15-85% less that 150 microns. Pulverizing is carried out preferably at low air flows so that the resulting air and pulverized fuel mixture of about 1-2 kilograms air per kilogram fuel may be directly injected by the swirl stabilized air suspension type burner into the furnace along with secondary air. Combustion in the furnace requires no supplemental or pilot fuel to maintain stability. The process has good load following characteristics having at least a 2.5:1 turndown ratio.

대표청구항 ▼

A process for burning a wet organic fuel in a water wall or other cold wall type boiler which comprises: providing at least one swirl stabilized burner adapted for burning a powdered fuel; drying the wet fuel to an average moisture content less than about 30% with at least a portion of the finer par

A process for burning a wet organic fuel in a water wall or other cold wall type boiler which comprises: providing at least one swirl stabilized burner adapted for burning a powdered fuel; drying the wet fuel to an average moisture content less than about 30% with at least a portion of the finer particles having a moisture content not exceeding about 20%; pulverizing the dried fuel so that at least 60% by weight of the particles are finer than about 1000 microns and at least 15% of the particles are finer than about 150 microns, adjusting the fraction of the less than about 150 micron particles in the pulverized portion so that the fuel will produce a self-sustaining flame; conveying the dried and ground particles to the burner while suspended in a stream of primary air; and igniting the particles, whereby the less than about 150 micron fraction provides sufficient ignition energy to sustain stable combustion of the entire fuel.