초록 ▼

The levitating force of the levitation magnets of a magnetically levitated vehicle of the linear stator type is controlled for regulating the air gap width (S) between these levitation magnets (2) and a rail track having teeth of uniform, determined width in the travel direction. The control is resp

The levitating force of the levitation magnets of a magnetically levitated vehicle of the linear stator type is controlled for regulating the air gap width (S) between these levitation magnets (2) and a rail track having teeth of uniform, determined width in the travel direction. The control is responsive to the air gap width and, if desired, to the differentiation of the air gap width with respect to time. The control requirements are dependent on the vehicle speed, whereby in the low speed and stopping situations the primary task is a stabilizing one and in higher speed situations the primary task is a good following behavior. For this purpose a steering signal is derived from the output terminals of an induction conductor loop located in the surface of a pole piece of a levitation magnet facing the track teeth. The loop has a width corresponding to the tooth width. The frequency of the signal induced in the loop is directly proportional to the vehicle speed. The steering signal passes through an adapting circuit and is supplied to the magnet control circuit whereby the control parameters are adjusted according to the vehicle speed in order to fulfil the control requirements in the whole speed range.

대표청구항 ▼

An apparatus for controlling the force of a levitation magnet in a magnetically levitated vehicle having a linear stator, comprising a uniformly toothed rail track with teeth each having a determined width in the travel direction, levitation magnets having pole pieces with surfaces facing said rail

An apparatus for controlling the force of a levitation magnet in a magnetically levitated vehicle having a linear stator, comprising a uniformly toothed rail track with teeth each having a determined width in the travel direction, levitation magnets having pole pieces with surfaces facing said rail track teeth, a groove in said pole piece surface, an induction conductor loop in said groove, said induction conductor loop including output terminals, said conductor loop having a loop width in the travel direction corresponding to said determined width of said track teeth for inducing in said conductor loop an alternating signal having a frequency proportional to the vehicle speed on said track, levitation magnet control circuit means operatively connected to said levitation magnets for energizing said carrier magnets, signal processing circuit means operatively connected to said output terminals of said conductor loop for receiving said alternating signal to produce a control signal representing the vehicle speed, and feed back means connecting an output of said signal processing circuit means to said magnet control circuit means for controlling the magnet force in response to said control signal.