초록

A control valve for cyclic duty steam turbines having a one piece bonnet configuration which has been designed to minimize the affects of and withstand expected cyclic stresses during hot, warm and cold startup conditions of turbines utilized for peak loading.

대표청구항 ▼

A turbine control valve comprising: a body having a cavity disposed therein, the cavity having an elongated generally round first opening on one side of the cavity, the first opening having a circumferential sealing surface adjacent thereto, a generally round second opening with a valve seat dispose

A turbine control valve comprising: a body having a cavity disposed therein, the cavity having an elongated generally round first opening on one side of the cavity, the first opening having a circumferential sealing surface adjacent thereto, a generally round second opening with a valve seat disposed therein on a side opposite the first opening, and a third opening for admitting steam to the cavity; a valve plug which mates with the valve seat to close off the second opening; a bonnet having a generally cylindrical portion with an integral flange on one end of the cylindrical portion, the flange having a circumferential seal surface which mates with the circumferential sealing surface adjacent the first opening, the bonnet having a centrally disposed bore extending therethrough with two counter bores extending inwardly from the end without the flange, the first counter bore being long and terminating with a large fillet radius, the second counter bore being sufficiently deep to receive the plug and also terminating with a fillet radius, the cylindrical portion having a first raised land on the outer surface adjacent the flange and a second raised land on the outer surface and spaced from the first land and the first raised land being larger in diameter than the second raised land; the first opening in the body also having raised first and second lands which respectively mate with the first and second lands on the cylindrical portion of the bonnet in such a manner that there is a low clearance between the mating lands; a hardened sleeve tightly fit into the first counter bore in the bonnet; a stem guide bushing fastened in the bore of the bonnet; a valve stem slidably disposed in the stem guide bushing; a plug guide slidably disposed in the hardened sleeve and on the valve stem and affixed to the valve plug so that the sliding motion between the valve stem and the plug guide is small; the valve plug having a centrally disposed port extending therethrough which cooperates with the valve stem to provide means for reducing the force required to remove the plug from the seat to form a control valve operable for cyclic duty where large temperature changes occur at the plug.