초록 ▼

A process is disclosed for extruding a flat strip of uniformly thick sealant stock from an extruder which extrudes the sealant stock with a rotary helical action. The stock consists essentially of a vulcanizable mixture of a high molecular weight (mol wt) elastomer, a low mol wt elastomer, a curing

A process is disclosed for extruding a flat strip of uniformly thick sealant stock from an extruder which extrudes the sealant stock with a rotary helical action. The stock consists essentially of a vulcanizable mixture of a high molecular weight (mol wt) elastomer, a low mol wt elastomer, a curing agent and a processing aid selected from a tackifier and a homogenizer. The strip is less than about 10 mm thick, and at least 10 times as wide as it is thick. The stock does not flow and cannot be poured even at 212°F. The stock is supplied to the extruder by a reciprocating pump which maintains an intermittent pressure yet provides the required uniform thickness of strip. Each component of the stock strongly adheres to any surface, to all metal surfaces and to each other, making it difficult to obtain a homogeneous mixture. The rate at which the strip is discharged from the extruder is maintained substantially constant, and its thickness controlled by the speed of a horizontal endless belt conveyor onto which the vertically hanging strip is continuously discharged. A spray coating of aqueous polyvinyl alcohol, which is then dried, leaves a detackified surface without which the extrudate could not be handled.

대표청구항 ▼

A process for producing an elastomeric laminate of an essentially uncrosslinked highly viscous and adhesive puncture sealant strip and an inner liner, which laminate can be recovered for use at a later time for the construction of a self-sealing pneumatic tire, said process comprising, (i) maintaini

A process for producing an elastomeric laminate of an essentially uncrosslinked highly viscous and adhesive puncture sealant strip and an inner liner, which laminate can be recovered for use at a later time for the construction of a self-sealing pneumatic tire, said process comprising, (i) maintaining sealant stock, having a 75°F. room temperature Mooney viscosity (ML/rt 1-4) in the range from above 70 to about 110, at a temperataure in the range from about 120°F. to about 250°F. in a stock container adapted to keep heated stock under a pressure in the range from about 5 to about 50 psig; (ii) pumping said heated stock from said container with an intermittent pulsing action, to the intake of a heated screw-type extruder maintained at a temperature in the range from about 120°F. to about 250°F.; (iii) extruding a strip of said sealant from a terminal orifice having an essentially rectangular cross-section; (iv) depositing said strip of sealant hanging in a vertical plane onto a continuous strip of inner liner stock travelling in a horizontal plane so as to bond a strip having essentially uniform thickness directly to said stock, forming said laminate; (v) coating the surfaces of the sealant strip with an aqueous solution of a polymeric alkenyl alcohol detackifier; (vi) removing water from the detackifier so as to dry said laminate; and, (vii) recovering said laminate coated with the detackifier.