초록 ▼

Such synthetic resin lids comprise an outer rim (4) encompassing the barrel neck (3) and an inner rim (5) entering into the barrel neck (3) and projecting beyond the lid bottom (6) below the barrel opening, as well as a sealing ring inserted between the outer rim (4) of the lid and the inner rim (5)

Such synthetic resin lids comprise an outer rim (4) encompassing the barrel neck (3) and an inner rim (5) entering into the barrel neck (3) and projecting beyond the lid bottom (6) below the barrel opening, as well as a sealing ring inserted between the outer rim (4) of the lid and the inner rim (5) of the lid. This sealing ring is urged by means of a clamping ring (10) or tightening wire against the opening rim (14) of the barrel neck (3), the clamping ring (10) or tightening wire extending over a flange (110 or flange sections molded to the outer rim (4) of the lid at the bottom and extending underneath a solid border (120 which latter protrudes radially toward the outside at a spacing below the barrel opening from the barrel wall. This border can be designed as a continuously extending flange or can be subdivided into flange sections. An axially projecting annular web (8) is molded to the base of an annular chamber ( 7) formed by the outer and inner rims (4 and 5, respectively) of the lid. This annular web, when the lid (1) is closed, transmits axial forces caused by stacking, dropping, etc. directly into the barrel neck (3). Sealing rings (13) are arranged on both sides of the annular web (8) which rings, when the lid (1) is closed, rest with pretensioning on the opening rim (14) of the barrel neck (3).

대표청구항 ▼

Synthetic resin lid for blow-molded synthetic resin barrels, with an outer rim encompassing the barrel neck and an inner rim entering into the barrel neck and projecting beyond the lid bottom below the barrel opening, as well as with a sealing ring inserted between the outer lid rim and the inner li

Synthetic resin lid for blow-molded synthetic resin barrels, with an outer rim encompassing the barrel neck and an inner rim entering into the barrel neck and projecting beyond the lid bottom below the barrel opening, as well as with a sealing ring inserted between the outer lid rim and the inner lid rim, this sealing ring being urged by a clamping ring or tightening wire against the opening rim of the barrel neck, the clamping ring or tightening wire, respectively, extending over a flange or flange sections molded to the outer rim of the lid at the bottom and subtending a solid border which latter protrudes radially toward the outside from the barrel wall at a spacing below the barrel opening and is fashioned as a continuous flange or is subdivided into flange sections, characterized in that an annular web (8) projecting axially from the base of the annular chamber (7) constituted by the outer lid rim and inner lid rim (4 and 5, respectively) is molded-on, for introduction of axial forces, caused with the lid (1) being closed by stacking, dropping, etc., directly into the barrel neck (3); and that sealing rings (13) are arranged on both sides of the annular web (8) which, with the lid (1) being closed, rest with pretensioning on the opening rim (14) of the barrel neck (3).