이 특허를 인용한 특허 (55)

1. Stephens, Jeffrey Scott; Bye, Steven Douglas; Day, Dan, Apparatus for co-curing composite skins and stiffeners in an autoclave.

   상세보기
2. Pham, Doan D.; Tollan, Mark W.; Morris, John D., Bagging process and mandrel for fabrication of elongated composite structure.

   상세보기
3. Sahr, Ronald C.; Nelson, Michael D.; Retka, Robert L., Boat and method for manufacturing using resin transfer molding.

   상세보기
4. Sahr,Ronald C.; Nelson,Michael D.; Retka,Robert L., Boat and method for manufacturing using resin transfer molding.

   상세보기
5. Sahr,Ronald C.; Nelson,Michael D.; Retka,Robert L., Boat and method for manufacturing using resin transfer molding.

   상세보기
6. Sahr,Ronald C.; Nelson,Michael D.; Retka,Robert L., Boat and method for manufacturing using resin transfer molding.

   상세보기
7. McCarville Douglas A. ; Sweetin Joseph L. ; Medoff Irwin, Breathable tooling for forming parts from volatile-emitting composite materials.

   상세보기
8. Kismarton, Max U.; Andrews, Francis E.; Koch, William J., Compliant stiffener for aircraft fuselage.

   상세보기
9. Hogg, Merrill W., Composite member defining a contour surface.

   상세보기
10. Lane, Malcolm David; Poursartip, Anoshiravan; Fernlund, Goran; Floyd, Anthony Michael; Van Ee, David Andrew; Hibbert, Morgan Edwin John, Detection, monitoring, and management of gas presence, gas flow and gas leaks in composites manufacturing.

    상세보기
11. Boyeldieu, Aurelien; Charbonnier, Virginie, Device for the production of a composite material part integrating a drainage system.

    상세보기
12. Waldrop, John C.; Burkett, William R.; Sesti, Carmine J.; Harshman, Bruce; Tegeler, Alan F.; Weinman, Wesley P., Double bag vacuum infusion process and system for low cost, advanced composite fabrication.

    상세보기
13. Waldrop, John C.; Burkett, William R.; Sesti, Carmine J.; Harshman, Bruce; Tegeler, Alan F.; Weinman, Wesley P., Double bag vacuum infusion process and system for low cost, advanced composite fabrication.

    상세보기
14. Shaw, Paul D.; Suriyaarachchi, Raviendra S.; Heath, Richard Edward, End effector apparatus and methods for handling composite structures.

    상세보기
15. Downs, Roland Joseph; Adams, Christopher Michael; Holweger, Jon Michael; Hatcher, Wesley Edward; McDaniels, Keith Joel, Engineered composite systems.

    상세보기
16. Seal, Ellis C.; Biggs, Jr., Robert William; Bodepudi, Venu Prasad; Cranston, John A., High performance structural laminate composite material for use to 1000.degree. F. and above, apparatus for and method of manufacturing same, and articles made with same.

    상세보기
17. Thompson, Allan P.; Shigley, John K., Low density composite rocket nozzle components and process for making the same from standard density phenolic matrix, fiber reinforced materials.

    상세보기
18. Wirt, John; Hood, Jay, Method and apparatus for molding composite articles.

    상세보기
19. Wirt, John; Hood, Jay, Method and apparatus for molding composite articles.

    상세보기
20. Lorenz, Torsten; Stadler, Franz; Utecht, Stefan, Method and device for producing fiber-reinforced plastic components.

    상세보기
21. Wilson, Erich A.; Kipp, Michael D.; Ridges, Michael D., Method and system for forming composite geometric support structures.

    상세보기
22. Morris, John D.; Lee, Michael A.; Brook, Kenneth L., Method for Producing Composite Laminates Using a Collapsible Mandrel.

    상세보기
23. Stephens, Jeffrey Scott; Bye, Steven Douglas; Day, Dan, Method for co-curing composite skins and stiffeners in an autoclave.

    상세보기
24. McCarville, Douglas A.; Sweetin, Joseph L.; Medoff, Irwin, Method for forming composite parts from volatile-emitting materials using breathable tooling.

    상세보기
25. Hogg, Merrill W., Method for laying composite tape.

    상세보기
26. Frank, Stefan; Joern, Tina, Method for manufacturing a lining element, a lining element and a vehicle.

    상세보기
27. Campbell, Jr., James H., Method for manufacturing composite parts.

    상세보기
28. James H. Campbell, Jr., Method for manufacturing composite parts.

    상세보기
29. Albright, Dennis L.; Hackler, David W.; Clark, Randall R., Method for manufacturing lightweight composite fairing bar.

    상세보기
30. Van Ert Jack M. ; Byma George B., Method for molding headliners.

    상세보기
31. Morris, John D.; Lee, Michael A.; Brook, Kenneth L., Method for producing composite laminates using a collapsible mandrel.

    상세보기
32. Morris, John D.; Lee, Michael A.; Brook, Kenneth L., Method for producing composite laminates using a collapsible mandrel.

    상세보기
33. Simpson,Craig B.; Allman,Mike G.; Tuttle,Steven T.; Ashton,Larry J., Method of assembling a single piece co-cured structure.

    상세보기
34. Simpson,Craig B.; Allman,Mike G.; Tuttle,Steven T.; Ashton,Larry J., Method of assembling a single piece co-cured structure.

    상세보기
35. Dublinski Alex C. (Northford CT) Carstensen Thomas A. (Shelton CT) Ramey Philip J. (Milford CT), Method of fabricating a low total density, stabilized ramped honeycomb core for high pressure co-cure composite molding.

    상세보기
36. Bech, Anton, Method of manufacturing a wind turbine blade by embedding a layer of pre-cured fibre reinforced resin.

    상세보기
37. Schiffmann, Glenn P.; Schiffmann, Gerhard P., Methods of constructing buildings and building appurtenances.

    상세보기
38. Millard,Michael Lee; Richardson, Jr.,Horace, Methods of producing a ceramic matrix composite.

    상세보기
39. Utecht, Stefan; Krings, Wilhelm; Hänsch, Manfred, Multilayer, flexible planar material.

    상세보기
40. Mead, William T., Net molding of resin composite parts.

    상세보기
41. Rex W. Kay ; Troy L. White ; Craig B. Simpson, Pressure-cycled, packet-transfer infusion of resin-stitched preforms.

    상세보기
42. Ahrens, Dieter; Bardenhagen, Heinz, Process and apparatus for the production of a structure, in particular an aircraft structure, from a fiber composite material.

    상세보기
43. Loving David, Process for fiberglass molding using a vacuum.

    상세보기
44. Loving, David, Process for fiberglass molding using a vacuum.

    상세보기
45. Simpson,Craig B.; Allman,Mike Glen; Tuttle,Steven Taylor; Ashton,Larry J., Process for forming a single piece co-cure composite wing.

    상세보기
46. Christensen Stephen (Issaquah WA) Walker Michael A. (Sumner WA), Resin transfer molding of composite materials that emit volatiles during processing.

    상세보기
47. Simpson, Craig B.; Allman, Mike Glen; Tuttle, Steven Taylor; Ashton, Larry J., Single piece co-cure composite wing.

    상세보기
48. Simpson, Craig B.; Ashton, Larry J.; Allman, Mike G.; Tuttle, Steven T., Single piece co-cure composite wing.

    상세보기
49. Jagos, Paul D.; Quesnelle, Curtis Spencer; Schmitz, Thomas, Swing out mold insert device on lay up molds.

    상세보기
50. Downs, Roland Joseph; Adams, Christopher Michael; Holweger, Jon Michael, System and method for the transfer of color and other physical properties to laminate composite materials and other articles.

    상세보기
51. Downs, Roland Joseph; Adams, Christopher Michael; Holweger, Jon Michael, Systems and method for producing three-dimensional articles from flexible composite materials.

    상세보기
52. Downs, Roland Joseph; Adams, Christopher Michael; Holweger, Jon Michael; Hatcher, Wesley Edward; McDaniels, Keith Joel; Meldner, Heiner, Systems and method for producing three-dimensional articles from flexible composite materials.

    상세보기
53. Downs, Roland Joseph; Adams, Christopher Michael; Holweger, Jon Michael, Systems and methods for the transfer of color and other physical properties to laminate composite materials and other articles.

    상세보기
54. McAnally, Kent L., Vacuum-bagging process using PTFE beads.

    상세보기
55. Adams, Christopher Michael; Downs, Roland Joseph; McDaniels, Keith Joel, Waterproof breathable composite materials for fabrication of flexible membranes and other articles.

    상세보기
더보기