이 특허를 인용한 특허 (42)

1. Jones, Bart R.; Courter, David M.; Ritzema, Kenneth J.; McMaken, Marc A.; Asfaw, Selamawit, Adhesively bonded engine intake manifold assembly.

   상세보기
2. Jones, Bart R.; Ritzema, Kenneth J.; Courter, David M.; McMaken, Marc A.; Asfaw, Selamawit, Adhesively bonded engine intake manifold assembly.

   상세보기
3. Jones,Bart R.; Courter,David M.; Ritzema,Kenneth J.; McMaken,Mark A.; Asfaw,Selamawit, Adhesively bonded engine intake manifold assembly.

   상세보기
4. Jones,Bart R.; Courter,David M.; Ritzema,Kenneth J.; McMaken,Mark A.; Asfaw,Selamawit, Adhesively bonded engine intake manifold assembly.

   상세보기
5. Chino Shinji,JPX ; Satoh Nobuyuki,JPX ; Matsukawa Koji,JPX ; Okada Akihiko,JPX, Battery jar material for sealed secondary battery and battery jar for sealed secondary battery using the same.

   상세보기
6. Caimi, Luigi, Cable with fire-resistant, moisture-resistant coating.

   상세보기
7. Pavlovic, Slobodan; Sharaf, Nadir; Daftuar, Dilip, Charger assembly and electromagnetic interference shield assembly.

   상세보기
8. Sharaf, Nadir; Pavlovic, Slobodan; Rai, Rutunj; Daftuar, Dilip; Lopez, Juan; Rathod, Reshma, Charger assembly with heat transfer duct.

   상세보기
9. Niederst, Jeffrey, Coating process.

   상세보기
10. Nakagawa, Hiroyuki; Mizutani, Haruyasu; Koizumi, Junji; Nishikawa, Tomokazu; Teramoto, Yasunobu; Komori, Takahiro; Furusawa, Yasuhide, Damping resin composition and molded article using the same.

    상세보기
11. Perego, Gabriele; Albizzati, Enrico, Electrical cable, particularly for high voltage direct current transmission or distribution.

    상세보기
12. Perego, Gabriele; Albizzati, Enrico, Electrical cable, particularly for high voltage direct current transmission or distribution, and insulating composition.

    상세보기
13. Asfaw,Selamawit; Cederstrom,James; Brewster,Christopher Anthony; Krajewski,Brian Anthony, Engine intake manifold assembly.

    상세보기
14. Homsi, Emile N.; Krolick, Thomas J.; Lee, Chul S.; Han, Peter K.; Kagan, Val A., Engine noise barrier.

    상세보기
15. Wang Xiaorong ; Luo Xiao-Liang ; Clark Frank J. ; Takeichi Hideo ; Hall James E. ; Matsuse Takahiro,JPX ; Mashita Naruhiko,JPX ; Toyosawa Shinichi,JPX, Extended polymer compostion derived from blends of elastomers and syndiotactic polystyrene.

    상세보기
16. Kang Jung W. ; Wang Xiaorong ; Luo Xiao-Liang ; Clark Frank J. ; Poulton Jason T. ; Matsuse Takahiro,JPX ; Mashita Naruhiko,JPX ; Takeichi Hideo ; Toyosawa Shinichi,JPX, Extended syndiotactic polystyrene-elastomeric block copolymers.

    상세보기
17. Babcock Laura M. ; Morrell Dennis G. ; Kostas John N. ; Bell Andrew, Flourinated solid acids as catalysts for the preparation of hydrocarbon resins.

    상세보기
18. Adedeji,Adeyinka; Riding,Geoffrey Henry; Torrey,Bruce Marshall, High performance plastic pallets.

    상세보기
19. Pavlovic, Slobodan; Sharaf, Nadir; Daftuar, Dilip; Menzies, David, Housing assembly to enclose and ground an electrical subassembly.

    상세보기
20. Katsuhisa Kato JP; Kazuhide Kawai JP; Kazutoyo Osuka JP; Hiroyuki Wakabayashi JP; Hideki Oka JP, Ignition coil device having spool including glass fiber and silica.

    상세보기
21. Nagata, Takashi; Osuka, Kazutoyo; Konishi, Atsuyuki; Wada, Junichi, Ignition coil for internal combustion engine.

    상세보기
22. Okada Akihiko,JPX ; Sato Nobuyuki,JPX, Impact modified syndiotactic polystyrene blend.

    상세보기
23. Okada Akihiko,JPX ; Sato Nobuyuki,JPX, Impact modified syndiotactic polystyrene blend.

    상세보기
24. Babcock, Laura M.; Morrell, Dennis G., Metal halide solid acids and supported metal halides as catalysts for the preparation of hydrocarbon resins.

    상세보기
25. Morrell Dennis G. ; Babcock Laura M., Metal oxide solid acids as catalysts for the preparation of hydrocarbon resins.

    상세보기
26. Yamashita, Kazuyuki; Onaga, Takashi; Fujiki, Satoshi; Morimoto, Hideki; Obata, Tutomu; Suzuki, Masayasu, Method of producing a microproduct.

    상세보기
27. Wolkersdorfer, Werner, Motor vehicle.

    상세보기
28. Seip, Steven David; Thompson, Sharon Edwards; Townsend, IV, Edwin B., Polyolefin additive packages for producing articles with enhanced stain resistance.

    상세보기
29. Okada Akihiko,JPX, Process for producing acid-modified polyphenylene ether and polystyrenic resin composition.

    상세보기
30. Machida, Shuji; Shinohara, Masayuki; Housaki, Tatsuya, Process for producing polyolefin resin composition and polypropylene composition.

    상세보기
31. Kobayashi, Naokazu; Akema, Hiroshi; Tadaki, Toshihiro; Nishibata, Syuji, Rubber composition and tire.

    상세보기
32. Cohen Martin Paul ; Lawrence John Pennington ; Losey Cheryl Ann, Silica reinforced rubber composition and tire with tread.

    상세보기
33. Babcock Laura M. ; Morrell Dennis G., Solid acids as catalysts for the preparation of hydrocarbon resins.

    상세보기
34. Akihiko Okada JP; Takuma Aoyama JP, Styrene resin composition and method of manufacturing the same, and method of manufacturing styrene resin molded products.

    상세보기
35. Okada Akihiko,JPX ; Aoyama Takuma,JPX, Styrene resin composition and method of manufacturing the same, and method of manufacturing styrene resin molded products.

    상세보기
36. Okada, Akihiko; Aoyama, Takuma, Styrene resin composition and method of manufacturing the same, and method of manufacturing styrene resin molded products.

    상세보기
37. Machida Shuji (Sodegaura JPX) Tazaki Toshinori (Sodegaura JPX), Styrenic copolymer and process for producing same.

    상세보기
38. Okada Akihiko,JPX ; Fukui Hiroki,JPX, Styrenic resin composition.

    상세보기
39. Ohira Takashi,JPX ; Muta Susumu,JPX, Surface treatment of golf balls.

    상세보기
40. Merfeld, Glen David, Syndiotactic polystyrene blends.

    상세보기
41. Hennenberger, Florian; Völkel, Mark; Bluhm, Rüdiger; Maletzko, Christian; Gebhard, Andreas; Sutor, Stefan, Thermoplastic molding composition and moldings produced therefrom with improved wear resistance.

    상세보기
42. Schoemann,Michael P., Ultrathin structural panel with rigid insert.

    상세보기
더보기