초록 ▼

In a method of operating a multi-cylinder Diesel engine in which fuel delivered by an engine-driven high-pressure pump is supplied to a high-pressure line from where it is admitted through injectors to the associated cylinders by an engine speed synchronous pulse and the pressure in the fuel line is

In a method of operating a multi-cylinder Diesel engine in which fuel delivered by an engine-driven high-pressure pump is supplied to a high-pressure line from where it is admitted through injectors to the associated cylinders by an engine speed synchronous pulse and the pressure in the fuel line is determined by a pressure sensor at a certain operating point present during fuel delivery and, upon failure of the synchronous pulse, a pressure signal generated at this operating point is used to start the injection sequence with the activation of one of the injectors, and the time spans between subsequent operating points in the injection sequence are determined and, if a deviation between the time spans exceeds a limit value, another injector is selected for the start of another injection sequence, which is used as a new start of the injection sequence until the time spans between the various operating points in the high-pressure fuel supply lines which are a measure for engine speed are essentially the same.

대표청구항 ▼

A method of operating a multi-cylinder Diesel engine in which fuel is delivered by an engine-driven high-pressure pump to a common high-pressure supply line in which, with the pump deliveries, a series of pressure pulses with engine speed dependent time spans therebetween is generated in said high-p

A method of operating a multi-cylinder Diesel engine in which fuel is delivered by an engine-driven high-pressure pump to a common high-pressure supply line in which, with the pump deliveries, a series of pressure pulses with engine speed dependent time spans therebetween is generated in said high-pressure supply line and the fuel is admitted from said high-pressure supply line via injectors to the various cylinders under the control of magnetic valves in accordance with a predetermined injection sequence, which is initiated by an engine speed-synchronous pulse with which an injection event for a predetermined cylinder is associated and wherein the fuel pressure in said common high-pressure line during a predetermined pump delivery point is determined by a pressure sensor and, upon deviation from a set pressure value, is adjusted by means of an electronic control unit, said method, upon failure of said engine speed synchronous pulse, comprising the steps of: substituting a pressure pulse signal generated by said pressure sensor at said predetermined pump delivery point for said speed-synchronous pulse, activating one of said injectors and, in injection sequence, the other injectors for the sequential injection of fuel into the respective cylinders, determining the time span between the pressure pulse signals activating said one injector and the time spans between the following pressure pulse signals, comparing two of said time spans between consecutive pressure signals, and, if the difference between the two time spans exceeds a limit value, beginning the following injection sequence with the injector for another cylinder until the difference between the time spans measured with the beginning of said following injection sequence is less than said limit value as an indication that the proper assignment of injector and cylinder has been found allowing for smooth engine operation.