이 특허를 인용한 특허 (52)

1. Inabayashi Yoshihito,JPX ; Kano Hiroshi,JPX ; Soga Noboru,JPX ; Miyachi Haruhiko,JPX ; Torigoe Eiichi,JPX, Aluminum alloy brazing sheet for use in vacuum brazing.

   상세보기
2. Doko Takeyoshi,JPX ; Okada Koji,JPX, Aluminum alloy solder material, its manufacturing method, brazing sheet using this material, and method of manufacturing.

   상세보기
3. Kucza, Jean-Claude; Henry, Sylvain; Mediouni, Michel; Ebersolt, David; Remond, Nathalie, Aluminum alloy strip manufacturing process for the manufacture of brazed heat exchangers.

   상세보기
4. Kucza, Jean-Claude; Henry, Sylvain; Mediouni, Michel; Ebersolt, David; Remond, Nathalie, Aluminum alloy strip manufacturing process for the manufacture of brazed heat exchangers.

   상세보기
5. Henry, Sylvain; Remond, Nathalie; Chenal, Bruno, Aluminum alloy strips for heat exchangers.

   상세보기
6. Ando, Makoto; Murata, Takuya; Niikura, Akio, Aluminum-alloy clad material and production method therefor, and heat exchanger using said aluminum-alloy clad material and production method therefor.

   상세보기
7. Gabbianelli, Gianfranco; Ashley, Richard D.; Malczewski, Victor J., Apparatus and method for welding aluminum tubes.

   상세보기
8. Nehl,Thomas Wolfgang; Van Steenkiste,Thomas Hubert; Smith,John R.; Fuller,Brian K; Omekanda,Avoki M.; Morelli,Donald T.; Mantese,Joseph V., Assembly for measuring movement of and a torque applied to a shaft.

   상세보기
9. Goodrich, H. Scott; Palmer, Scott L.; Johnson, Gregory R.; Connor, Zayna M., Brazing sheet and method.

   상세보기
10. Gazapo, Jose L.; Fernandez Rivera, Catalina; Sanchez Suarez, Emilio, Bright products obtained by continuous casting.

    상세보기
11. Izaki Hiroshi,JPX ; Yoshino Masanori,JPX ; Kurotobi Manabu,JPX ; Uchida Mutsuo,JPX ; Shimizu Hiroaki,JPX, Cast iron pipe surface-modified for corrosion prevention and method of modifying the cast iron pipe surface for corrosi.

    상세보기
12. Bergstrom, David S.; Schott, Kris J.; Tarhay, Mark A., Clad alloy substrates and method for making same.

    상세보기
13. Bergstrom, David S.; Schott, Kris J.; Tarhay, Mark A., Clad alloy substrates and method for making same.

    상세보기
14. Ando, Makoto; Yanagawa, Yutaka; Niikura, Akio, Cladded aluminum-alloy material and production method therefor, and heat exchanger using said cladded aluminum-alloy material and production method therefor.

    상세보기
15. Elmoursi,Alaa A.; Lautzenhiser,Frans P.; Campbell,Albert B.; Smith,John R., Copper circuit formed by kinetic spray.

    상세보기
16. Fuller,Brian K; Elmoursi,Alaa A.; Rahmoeller,Kenneth M, Correcting defective kinetically sprayed surfaces.

    상세보기
17. Smith, John R.; Sultan, Michel Farid; Wu, Ming-Cheng; Zhao, Zhibo, Direct application of catalysts to substrates for treatment of the atmosphere.

    상세보기
18. Van Steenkiste, Thomas Hubert; Gourash, James A.; Smith, John R.; Kowalsky, Keith A, Feeder apparatus for controlled supply of feedstock.

    상세보기
19. Oskarsson, Anders; Ekstrom, Hans-Erik; Westergard, Richard; Tangen, Stian, High strength and sagging resistant fin material.

    상세보기
20. Oskarsson, Anders; Ekström, Hans-Erik; Westergård, Richard; Tangen, Stian, High strength and sagging resistant fin material.

    상세보기
21. Naidu, Malakondaiah; Heremans, Joseph Pierre; Nehl, Thomas Wolfgang; Smith, John R.; Fuller, Brian K, Integrating fluxgate for magnetostrictive torque sensors.

    상세보기
22. Van Steenkiste, Thomas Hubert; Drew, George Albert; Gorkiewicz, Daniel William; Gillispie, Bryan A., Kinetic sprayed electrical contacts on conductive substrates.

    상세보기
23. Van Steenkiste,Thomas Hubert; Drew,George Albert; Gorkiewicz,Daniel William; Gillispie,Bryan A., Kinetic sprayed electrical contacts on conductive substrates.

    상세보기
24. Morelli, Donald T.; Elmoursi, Alaa A.; Van Steenkiste, Thomas H.; Fuller, Brian K.; Gillispie, Bryan A.; Gorkiewicz, Daniel W., Kinetically sprayed aluminum metal matrix composites for thermal management.

    상세보기
25. Morelli,Donald T.; Elmoursi,Alaa A.; Van Steenkiste,Thomas H.; Fuller,Brian K.; Gillispie,Bryan A.; Gorkiewicz,Daniel W., Kinetically sprayed aluminum metal matrix composites for thermal management.

    상세보기
26. Van Steenkiste, Thomas Hubert, Low pressure powder injection method and system for a kinetic spray process.

    상세보기
27. Zhao, Zhibo; Gillispie, Bryan A.; Smith, John R.; Van Steenkiste, Thomas Hubert; Luo, Yang, Method for direct application of flux to a brazing surface.

    상세보기
28. Herderick, Edward D.; Cooper, Kirk E.; Ames, Nathan D., Method for fabricating silicon carbide assemblies.

    상세보기
29. Sadek, Alber; Herderick, Edward D.; Cooper, Kirk E.; Ames, Nathan D., Method for joining silicon carbide components to one another.

    상세보기
30. Sibum,Heinz, Method for manufacturing a titanium sheet and a shaped component consisting of the titanium sheet.

    상세보기
31. Kawahara, Akira; Doko, Takeyoshi, Method for manufacturing an aluminum alloy fin material for brazing.

    상세보기
32. Schmidt, Joachim-Franz; Neubauer, Marcel, Method for producing a bondable coating on a carrier strip.

    상세보기
33. Van Steenkiste, Thomas Hubert; Gorkiewicz, Daniel William; Drew, George Albert, Method for producing electrical contacts using selective melting and a low pressure kinetic spray process.

    상세보기
34. Sawtell, Ralph R.; Chu, Men Glenn, Method for producing ingot with variable composition using planar solidification.

    상세보기
35. Van Steenkiste,Thomas Hubert; Mantese,Joseph V.; Li,Bob Xiaobin; Wethey,Pertrice Auguste; Johnston,Robert Paul; Nelson,David Emil, Method for securing ceramic structures and forming electrical connections on the same.

    상세보기
36. Romanowski, Christopher A., Method for twin roll casting of aluminum clad magnesium.

    상세보기
37. Fuller, Brian K.; Van Steenkiste, Thomas H., Method of coating with combined kinetic spray and thermal spray.

    상세보기
38. Van Steenkiste, Thomas Hubert; Smith, John R.; Gorkiewicz, Daniel William; Elmoursi, Alaa A.; Gillispie, Bryan A.; Patel, Nilesh B., Method of maintaining a non-obstructed interior opening in kinetic spray nozzles.

    상세보기
39. Van Steenkiste, Thomas Hubert, Method of producing a coating using a kinetic spray process with large particles and nozzles for the same.

    상세보기
40. Chu, Men G.; Sawtell, Ralph R.; Boylstein, Ronald E., Method of producing ingot with variable composition using planar solidification.

    상세보기
41. Van Steenkiste,Thomas Hubert; Han,Taeyoung; Gillispie,Bryan A., Modified high efficiency kinetic spray nozzle.

    상세보기
42. Kilmer, Raymond J., Multi-layer, heat treatable brazing sheet with aluminum interlayer.

    상세보기
43. Alfred Johann Peter Haszler DE; Dietmar Franz Brandner DE, Multilayer metal composite products obtained by compound strand casting.

    상세보기
44. Gillispie, Bryan A.; Zhao, Zhibo; Smith, John Robert; Van Steenkiste, Thomas Hubert; Elmoursi, Alaa A.; Luo, Yang; Hutchins, Hartley F., Product and method of brazing using kinetic sprayed coatings.

    상세보기
45. Kisielius, legal representative,Stefanija; Cheadle,Brian E.; Krueger,Robert H.; Liang,Feng; Kozdras,Mark S.; Dockus,Kostas F., Products for use in low temperature fluxless brazing.

    상세보기
46. Van Steenkiste,Thomas Hubert; Fuller,Brian K, Spray system with combined kinetic spray and thermal spray ability.

    상세보기
47. Chu, Men G.; Shaw, Jeffrey J., System and method of producing multi-layered alloy products.

    상세보기
48. Chu, Men G.; Shaw, Jeffrey J., System and method of producing multi-layered alloy products.

    상세보기
49. Oskarsson, Anders, Ultra sagging and melting resistant fin material with very high strength.

    상세보기
50. Kilmer,Raymond J., Ultra-longlife, high formability brazing sheet.

    상세보기
51. Gabbianelli, Gianfranco; Ashley, Richard D.; Malczewski, Victor J., Welding material and method without carrier.

    상세보기
52. Gabbianelli, Gianfranco; Ashley, Richard D.; Miller, Ralph, Welding material with conductive sheet and method.

    상세보기
더보기