초록 ▼

This method for Doppler spectral processing more readily identifies the profiler radar return signals from the atmosphere in the presence of contamination, e.g., from bird echoes, ground clutter, and radio frequency interference. Profiler radars measure winds in the atmosphere by using backscatter (

This method for Doppler spectral processing more readily identifies the profiler radar return signals from the atmosphere in the presence of contamination, e.g., from bird echoes, ground clutter, and radio frequency interference. Profiler radars measure winds in the atmosphere by using backscatter (i) from refractive index fluctuations in clear air due to turbulence or (ii) from precipitation such as rain or snow. These radars also receive contaminating radar returns from ground clutter (e.g., from vehicles, power lines, and trees) and from fliers (e.g., aircraft, insects, and birds). In general, the radar return signals from the atmosphere have statistical and physical properties different from those properties for the contaminating radar returns. This new method uses these differences to eliminate or reduce contamination in radar Doppler spectra for estimation of atmospheric winds.

대표청구항 ▼

A method for Doppler spectral averaging, the method comprising: (a) collecting a statistical sample set for each Doppler velocity, antenna beam, and radar range using radar Doppler spectral values sampled over time; (b) detecting multiple signal sources in said radar Doppler spectral values by using

A method for Doppler spectral averaging, the method comprising: (a) collecting a statistical sample set for each Doppler velocity, antenna beam, and radar range using radar Doppler spectral values sampled over time; (b) detecting multiple signal sources in said radar Doppler spectral values by using differences in statistical and physical properties of said radar Doppler spectral values; (c) separating signals from said multiple signal sources over time, over Doppler velocity, and over radar range; (d) identifying contamination in said radar Doppler spectral values using said statistical and physical properties; (e) eliminating said contamination, leaving atmospheric signal and radar system noise when these are observable; (f) identifying said atmospheric signal based upon said statistical properties and physical properties; (g) estimating an average spectrum using a subset of said samples identified with said atmospheric signal and with said radar system noise; and (h) indicating a presence of useful signal from said radar Doppler spectral values in accordance with said average spectrum.