초록 ▼

Air is passed under pressure into a pipe under test and into a reference chamber connected to the pipe by a valve while recording at intervals of every few seconds the temperature in the reference chamber, the temperature in the pipe and the absolute pressure in the reference chamber. When the test

Air is passed under pressure into a pipe under test and into a reference chamber connected to the pipe by a valve while recording at intervals of every few seconds the temperature in the reference chamber, the temperature in the pipe and the absolute pressure in the reference chamber. When the test pressure has been reached the valve is closed and the differential pressure between the pipe and the reference chamber is measured. The valve is opened to equalize the pressure and then closed again and the differential pressure drift rate is measured. This is repeated several times. A computer is used to calculate a creep prediction curve. A comparison is made to see whether the pressure drift rate due to creep and leak only in the pipe independent of any temperature change in the pipe is trending towards crossing the curve or not.

대표청구항 ▼

A method of testing an isolated plastic pipe for leakage wherein the leakage from the pipe is qualified against a pass/fail leakage criterion by eliminating the effects of temperature change and changes in the physical pipe volume due to viscoelastic behavior of the plastic pipe, the method comprisi

A method of testing an isolated plastic pipe for leakage wherein the leakage from the pipe is qualified against a pass/fail leakage criterion by eliminating the effects of temperature change and changes in the physical pipe volume due to viscoelastic behavior of the plastic pipe, the method comprising: (i) passing air under pressure into the pipe and into a reference chamber connected to the pipe by a valve while recording at intervals of every few seconds the temperature in the reference chamber, the temperature in the pipe or in the ground adjacent the pipe, and the absolute pressure in the reference chamber; (ii) when a test pressure has been reached closing said valve and repeatedly measuring the differential pressure between the pipe and the reference chamber; (iii) opening the valve to equalize the pressures in the pipe and the reference chamber; (iv) repeating steps (ii) and (iii) several times at intervals of less than half an hour; and (v) using a computer to calculate: (a) the predicted curve relating the pressure drop in the pipe (owing to creep and leakage owing to an allowable leak) to time; for each set of differential pressures measured at step (ii): (b) the rate of change with respect to time of the differential pressure between the pipe and the reference chamber (the measured differential pressure drift rate); (c) the rate of change with respect to time of the temperature of the pipe or the adjacent ground (the test temperature drift rate); (d) the rate of change with respect to time of the temperature of the reference chamber (the reference temperature drift rate); (e) the rates of change with respect to time of the pressure drift rates corresponding to (c) and (d) (the predicted test pressure drift rate and the predicted reference pressure drift rate, respectively); (f) the difference between the pressure drift rates calculated in step (e) to yield the predicted differential pressure drift rate; (g) the difference between (b) and (f) to yield the pressure drift rate due to creep and leak only in the pipe, independent of any temperature change in the pipe; and (vi) comparing the results yielded by step (g) and determining whether or not the results trend is towards crossing a curve representing a creep prediction model at the allowable leak.