초록 ▼

Flux-focusing electromagnetic sensor using a ferromagnetic flux-focusing lens simplifies inspections and increases detectability of fatigue cracks and material loss in high conductivity material. A ferrous shield isolates a high-turn pick-up coil from an excitation coil. Use of the magnetic shield p

Flux-focusing electromagnetic sensor using a ferromagnetic flux-focusing lens simplifies inspections and increases detectability of fatigue cracks and material loss in high conductivity material. A ferrous shield isolates a high-turn pick-up coil from an excitation coil. Use of the magnetic shield produces a null voltage output across the receiving coil in presence of an unflawed sample. Redistribution of the current flow in the sample caused by the presence of flaws, eliminates the shielding condition and a large output voltage is produced, yielding a clear unambiguous flaw signal. Maximum sensor output is obtained when positioned symmetrically above the crack. By obtaining position of maximum sensor output, it is possible to track the fault and locate the area surrounding its tip. Accuracy of tip location is enhanced by two unique features of the sensor; a very high signal-to-noise ratio of the probe\s output resulting in an extremely smooth signal peak across the fault, and a rapidly decaying sensor output outside a small area surrounding the crack tip enabling the search region to be clearly defined. Under low frequency operation, material thinning due to corrosion causes incomplete shielding of the pick-up coil. Low frequency output voltage of the probe is therefore a direct indicator of thickness of the test sample. Fatigue testing a conductive material is accomplished by applying load to the material, applying current to the sensor, scanning the material with the sensor, monitoring the sensor output signal, adjusting material load based on the sensor output signal of the sensor, and adjusting position of the sensor based on its output signal.

대표청구항 ▼

A method of testing fatigue in a conductive material comprising the steps of: (a) applying a load to the conducting material; (b) applying a current to an eddy current probe to generate eddy currents within the conducting material; (c) scanning the conducting material with the eddy current probe; (d

A method of testing fatigue in a conductive material comprising the steps of: (a) applying a load to the conducting material; (b) applying a current to an eddy current probe to generate eddy currents within the conducting material; (c) scanning the conducting material with the eddy current probe; (d) monitoring the output signal of the eddy current probe; (e) adjusting the load on the conducting material based on the output signal of the eddy current probe; and (f) adjusting the x-axis and y-axis position of the eddy current probe over the surface of the conducting material based on the output signal of the eddy current probe, wherein the position of the fatigue crack tip is determined by maximum eddy current probe output signal and the position of the eddy current probe is incremented in the direction of the crack growth as determined by previous crack tip locations.