초록 ▼

A power and control system for micro-electronics is described, as for lightweight, battery-powered electrochromic (EC) eyewear. Preferably such system includes a primary, lithium-type cell and a secondary, sealed lead acid-type cell in a hybrid, power-sharing configuration capable of supplying the l

A power and control system for micro-electronics is described, as for lightweight, battery-powered electrochromic (EC) eyewear. Preferably such system includes a primary, lithium-type cell and a secondary, sealed lead acid-type cell in a hybrid, power-sharing configuration capable of supplying the low-energy, high-current (pulse) drain requirements of microelectronics, e.g. a switchable EC lens. A switch-mode power supply controller manages the power-sharing load on the hybrid battery system such that the secondary cell is charged by the primary cell. The system is capable of meeting short-term pulse drain requirements of switching EC lenses from clear to fully darkened at an acceptably fast rate and long-term operating life requirements of approximately 1500 cycles. The invented lead acid-type battery preferably is elongate, of uniform, right-rectangular cross section and provides over 20 mA-hours' capacity and the invented lithium-type battery preferably also is elongate, of uniform, right-rectanglular cross section and provides over 180 mA-hours' capacity, all in a tiny volume compatible with one or more volume-restricted spaces. Preferably, the lithium-type and lead acid-type batteries are of approximately equal form factor and volume, for symmetric placement thereof in a void within either temple. The temples are hingedly connected with the eyewear's front piece via a unique leaf spring that biases the former into one of two orientations relative to the latter. Dual like-cell battery configurations also are disclosed, along with a flexible circuit defining one or more frame-mounted transmissivity switches. A microcontroller is described that fits within a tiny void formed in the eyewear's bridge. Finally an external, battery-powered battery charger case and circuit are described for use with EC eyewear powered by dual lead acid batteries.

대표청구항 ▼

[ We claim:] [7.] A temple piece for an eyeglass frame having a front piece including a pair of lens rims, said temple piece having a front region with an end for connection to a lens rim and a rear region having an ear piece; pivot means at said end of said front region for pivotally connecting sai

[ We claim:] [7.] A temple piece for an eyeglass frame having a front piece including a pair of lens rims, said temple piece having a front region with an end for connection to a lens rim and a rear region having an ear piece; pivot means at said end of said front region for pivotally connecting said end of said front region of said temple piece to an eyeglass frame, said front region of said temple piece having a top wall, a bottom wall spaced from said top wall, an inner side wall and an outer side wall spaced from said inner side wall, said side walls extending between said top wall and said bottom wall to form a hollow chamber in said temple piece for receiving a battery, a portion of said outer side wall forming a leaf spring having a free end flexible relative to said outer side wall, whereby said leaf spring functions to bias said temple piece into a normal open position relative to an eyeglass frame.