초록 ▼

A stop cylinder and piston assembly has both a firing piston and a piston ed for both firing and return located on the same piston rod. The stop cylinder and piston assembly is designed with gas passages so that gas injected for firing purposes through a single aperture in the sidewall of a cylinder

A stop cylinder and piston assembly has both a firing piston and a piston ed for both firing and return located on the same piston rod. The stop cylinder and piston assembly is designed with gas passages so that gas injected for firing purposes through a single aperture in the sidewall of a cylinder is applied to the rear surface of both the firing piston and the piston used for both firing and return. The system is reset by injecting return gas through a second sidewall aperture that is applied to the forward surface of the return piston. A vessel bumper is installed in the forward end of a chamber containing the firing piston to provide cushioning for the firing piston upon being fired.

대표청구항 ▼

[ What is claimed is:] [1.] A stop cylinder and piston assembly comprising:a first hollow cylinder having a sidewall surrounding a chamber of a first predetermined diameter and a wall with a central aperture located at a forward end of said first hollow cylinder, said central aperture being of a sec

[ What is claimed is:] [1.] A stop cylinder and piston assembly comprising:a first hollow cylinder having a sidewall surrounding a chamber of a first predetermined diameter and a wall with a central aperture located at a forward end of said first hollow cylinder, said central aperture being of a second predetermined diameter that is smaller than said first predetermined diameter, an aft end of said first hollow cylinder being open to the full extent of said first predetermined diameter and a sidewall aperture located near the aft end of said first hollow cylinder;a second hollow cylinder attached to the aft end of said first hollow cylinder, said second hollow cylinder having a sidewall surrounding a chamber of a third predetermined diameter and a wall with a central aperture of said second predetermined diameter located at a forward end of said second hollow cylinder, an aft end of said second hollow cylinder being open to the full extent of said third predetermined diameter, a sidewall aperture located near the forward end of said second hollow cylinder, and a pressure communication aperture extending in an axial direction through the sidewall of said second hollow cylinder so as to provide a passage between said chambers of said first and second hollow cylinders;an end cap affixed to the aft end of said second hollow cylinder in such a manner as to leave an opening for the passage of air between said second hollow cylinder chamber and said pressure communication aperture;a piston rod extending from outside the forward end of said first hollow cylinder to said second hollow cylinder;a first piston affixed to said piston rod and located in said chamber of said first hollow cylinder; anda second piston affixed to said piston rod and located in said chamber of said second hollow cylinder.