이 특허를 인용한 특허 (99)

1. Eβer, Winfried; Goldschmidt, Dirk; Hanslits, Christopher R.; Ott, Michael; Paul, Uwe; Pickert, Ursula; Vogt, Russell G., Alloy for directional solidification and component made of stem-shaped crystals.

   상세보기
2. Stadelmaier, Falk, Apparatus and process for coating a component with aligning device.

   상세보기
3. Janssen, Stefan, Casting process and cast component.

   상세보기
4. Subramanian, Ramesh, Ceramic powder, ceramic layer and layer system having gadolinium/mixed crystal pyrochlore phases and oxides.

   상세보기
5. Subramanian, Ramesh, Ceramic powder, ceramic layer and layer system of two pyrochlore phases and oxides.

   상세보기
6. Subramanian, Ramesh, Ceramic powder, ceramic layer and layer system with pyrochlore phase and oxides.

   상세보기
7. Bolz, Andrea; Schumann, Eckart; Subramanian, Ramesh, Ceramic thermal barrier coating system with two ceramic layers.

   상세보기
8. Lampenscherf, Stefan, Coated component and production process.

   상세보기
9. Ladru, Francis-Jurjen; Motzkus, Ralf, Coating optimization process using a coupon and component comprising a coupon.

   상세보기
10. Jabado, Rene; Jensen, Jens Dahl; Krüger, Ursus; Körtvelyessy, Daniel; Lüthen, Volkmar; Reiche, Ralph; Rindler, Michael; Ullrich, Raymond, Cold spraying installation and cold spraying process with modulated gas stream.

    상세보기
11. Barnikel, Jochen; Schmitz, Friedhelm, Component having a coating system.

    상세보기
12. Barnikel, Jochen; Schmitz, Friedhelm, Component having a coating system.

    상세보기
13. Beck, Thomas; Settegast, Silke, Component having a film cooling hole.

    상세보기
14. Burbaum, Bernd; Mokadem, Selim; Pirch, Norbert, Component having weld seam and method for producing a weld seam.

    상세보기
15. Amedick, Volker; Blomeyer, Malte; Cravero, Leandro; Deuker, Eberhard; Heitfeld, Hendrik; Kaufmann, Carsten; Klocke, Meinolf; Völker, Stefan, Cooling circuit for removing waste heat from an electromechanical converter and power generating plant with a cooling circuit of this type.

    상세보기
16. Ehrlich, Marcel; Sczepurek, Tristan, Device and method for passage measurement.

    상세보기
17. Karmazin, Roman; Walter, Steffen, Dry composition, its use, layer system and coating process.

    상세보기
18. Ahmad, Fathi; Krause, Stefan; Lüsebrink, Oliver, Elongate component having longitudinal grains with different widths.

    상세보기
19. Babey, Matthias; Graumüller, Gerhard; Jungbluth, Matthias; Krannig, Reinhard; Köppen, Carsten; Tränkle, Volker; Wendt, Gunther; Wilkenhöner, Rolf, Flexible shipment packaging.

    상세보기
20. Konter Maxim,CHX ; Kurz Wilfried,CHX ; Gaumann Matthias,CHX, Gas turbine component.

    상세보기
21. Ott, Michael; Piegert, Sebastian; Randelzhofer, Peter; Singer, Robert, Germanium-containing solder, a component comprising a solder and a process for soldering.

    상세보기
22. Schlienger, Max Eric; French, Nina Bergen, Heating to control solidification of cast structure.

    상세보기
23. Goehler, Thomas; Hess, Thomas; Maiwald-Immer, Tobias, Irradiation in generative fabrication.

    상세보기
24. Bostanjoglo,Georg; Cox,Nigel Philip; Wilkenh？ner,Rolf, Layer system.

    상세보기
25. Kaiser, Axel; Schumann, Eckart; Subramanian, Ramesh, Layer system.

    상세보기
26. Stamm, Werner, Layer system comprising an nicocraly double protective layer with differing chromium content and alloy.

    상세보기
27. Bostanjoglo, Georg; Kaiser, Axel; Stamm, Werner; Steinbach, Jan; Thomaidis, Dimitrios, Layer system having a two-ply metal layer.

    상세보기
28. Bostanjoglo, Georg; Kaiser, Axel; Stamm, Werner; Steinbach, Jan; Thomaidis, Dimitrios, Layer system with double MCrAlX metallic layer.

    상세보기
29. Box, Paul; Evans, Hugh; Kircher, Thomas; Lewis, Thomas; McMordie, Bruce; Nicholls, John; Padley, Paul; Simms, Nigel; Venezia, Jonathan; Walker, Paul Mathew; Weatherill, Adrian; Whitehurst, Mick, Layered coating system with a MCrAlX layer and a chromium rich layer and a method to produce it.

    상세보기
30. Sch체tze,Michael; Stamm,Werner, MCrAlX alloy and turbine component having protective layer made from MCrAlX alloy.

    상세보기
31. Fairbourn, David; Walker, Paul Mathew, MCrAlY alloy, methods to produce a MCrAlY layer and a honeycomb seal.

    상세보기
32. Schnell,Alexander; Bezencon,Cyrille; Hoebel,Matthias; Khan,Abdus Suttar; Konter,Maxim; Kurz,Wilfried, MCrAlY-coating.

    상세보기
33. Jabado, Rene; Krüger, Ursus; Körtvelyessy, Daniel; Reiche, Ralph; Rindler, Michael; Steinbach, Jan; Ullrich, Raymond, Material composition for producing a coating for a component made from a metallic base material, and coated metallic component.

    상세보기
34. Stamm, Werner; Steinbach, Jan, Matrix and layer system comprising non-stoichiometric particles.

    상세보기
35. Kulkarni, Anand A.; Shipper, Jr., Jonathan E.; Stamm, Werner, Metallic bondcoat or alloy with a high gamma/gamma' transition temperature and a component.

    상세보기
36. Kulkarni, Anand A.; Shipper, Jr., Jonathan E.; Stamm, Werner, Metallic bondcoat with a high gamma/gamma' transition temperature and a component.

    상세보기
37. Rodatz, Paul; Rösel, Gerd; Zhang, Hong, Method and a device for providing lambda control in an internal combustion engine.

    상세보기
38. Arjakine, Nikolai; Bostanjoglo, Georg; Burbaum, Bernd; Gasser, Andres; Jambor, Torsten; Linnenbrink, Stefanie; Melzer-Jokisch, Torsten; Ott, Michael; Pirch, Norbert; Wilkenhöner, Rolf, Method and apparatus for welding workpieces of high-temperature superalloys.

    상세보기
39. Arjakine, Nikolai; Bostanjoglo, Georg; Burbaum, Bernd; Gasser, Andres; Jambor, Torsten; Linnenbrink, Stefanie; Melzer-Jokisch, Torsten; Ott, Michael; Pirch, Norbert; Wilkenhöner, Rolf, Method and device for welding workpieces made of high-temperature resistant super alloys.

    상세보기
40. Ahmad, Fathi; Haberstadt, Knut; Lerner, Christian, Method for adjusting the coolant consumption within actively cooled components, and component.

    상세보기
41. Ahmad, Fathi; Halberstadt, Knut; Lerner, Christian, Method for assessing the coolant consumption within actively cooled components.

    상세보기
42. Hoebel, Matthias; Obbard, Edward; Schnell, Alexander, Method for controlling the microstructure of a laser metal formed hard layer.

    상세보기
43. Jungbluth, Matthias, Method for determining the roughness of an internal surface.

    상세보기
44. Förster, Ralf; Klein, Karsten; Laudien, Ulrich; Settegast, Silke; Subramanian, Ramesh, Method for electrical discharge machining of electrically non-conductive material.

    상세보기
45. Brehm,Walter; Hoebel,Matthias; Obbard,Edward; Schnell,Alexander, Method for fabricating, modifying or repairing of single crystal or directionally solidified articles.

    상세보기
46. Beck, Thomas; Cox, Nigel-Philip; Settegast, Silke, Method for producing a hole.

    상세보기
47. Beck, Thomas; Settegast, Silke, Method for producing a hole.

    상세보기
48. Paul, Uwe, Method for producing a pattern for the precision-cast preparation of a component comprising at least one cavity.

    상세보기
49. Bostanjoglo,Georg; Cox,Nigel Philip; Wilkenh��ner,Rolf, Method for producing a three-dimensional moulded body.

    상세보기
50. Jabado, Rene; Jensen, Jens Dahl; Krüger, Ursus; Körtvelyessy, Daniel; Lüthen, Volkmar; Reiche, Ralph; Rindler, Michael; Ullrich, Raymond, Method for producing a wear layer.

    상세보기
51. Beck,Thomas; Bostanjoglo,Georg; Cox,Nigel Philip; Wilkenh철ner,Rolf, Method for producing monocrystalline structures.

    상세보기
52. Dankert, Michael; Feldhege, Martin; Irmisch, Stefan; Oechsner, Matthias; Schumann, Eckart; Stamm, Werner, Method for recording microstructural changes in a component.

    상세보기
53. Singer, Robert; Volek, Andreas, Method for repairing cracks in components and solder material for soldering components.

    상세보기
54. Berger, Ingo; Münzer, Jan; Reinkensmeier, Ingo; Settegast, Silke, Method for soldering with a multistep temperature profile.

    상세보기
55. Berger, Ingo; Münzer, Jan; Reinkensmeier, Ingo; Settegast, Silke, Method for soldering with a multistep temperature profile.

    상세보기
56. Ladru, Francis-Jurjen; Siebert, Bernhard, Method for testing a thermography apparatus, designed for carrying out a thermography method, for its correct operation, test component therefor and method for its production.

    상세보기
57. Heinz, Paul; Singer, Robert, Method for the soldering repair of a component in a vacuum and an adjusted partial oxygen pressure.

    상세보기
58. Bullinger, Patrick; Grosshäuser, Martin; Paul, Andreas; Reiermann, Dietmar; Rindler, Michael; Stamm, Werner, Method for treating a gas turbine blade and gas turbine having said blade.

    상세보기
59. Mokadem, Selim; Pirch, Norbert, Method for welding depending on a preferred direction of the substrate.

    상세보기
60. Hoebel, Matthias; Fehrmann, Bernd, Method of controlled remelting of or laser metal forming on the surface of an article.

    상세보기
61. Morris, Mark C.; Strangman, Tom; Hu, Yiping, Method of fabricating turbine components for engines.

    상세보기
62. Schnell,Alexander; Bezencon,Cyrille; Hoebel,Matthias; Khan,Abdus Suttar; Konter,Maxim; Kurz,Wilfried, Method of growing a MCrAlY-coating and an article coated with the MCrAlY-coating.

    상세보기
63. Fernihough,John; Hoebel,Matthias; Konter,Maxim, Method of removing casting defects.

    상세보기
64. Jungbluth, Matthias; Steinbach, Jan; Wilkenhöner, Rolf, Method of repairing a crack in a turbine component.

    상세보기
65. Betz, J?rgen, Method of welding single crystals.

    상세보기
66. Hann, Brian; Legzdina, Daira; Morris, Mark C.; Godfrey, Donald G., Methods for forming ceramic reinforced titanium alloys.

    상세보기
67. Kington, Harry Lester; Godfrey, Donald G.; Morris, Mark C.; Volas, Michael G.; Hann, Brian; Dawson, Robert J., Methods for forming oxide dispersion-strengthened alloys.

    상세보기
68. Hu,Yiping; Hehmann,William F.; Madhava,Murali, Methods for repair of single crystal superalloys by laser welding and products thereof.

    상세보기
69. Amann, Christian; Beck, Thomas; Beckmann, Björn; Böttcher, Andreas; Esser, Winfried; Gaio, Giuseppe; Küperkoch, Rudolf; Schumann, Eckart; Teteruk, Rostislav, Modified interface around a hole.

    상세보기
70. Anton, Reiner; Heinecke, Brigitte; Ott, Michael; Ressel, Christian, Mould for soldering, arrangement of moulds, a method and a component.

    상세보기
71. Felkel, Mario; Gruner, Heiko; Ladru, Francis, Plasma spray nozzle with internal injection.

    상세보기
72. Felkel, Mario; Gruner, Heiko; Ladru, Francis-Jurjen, Plasma spray nozzle with internal injection.

    상세보기
73. Bostanjoglo, Georg; Cox, Nigel-Philip; Wilkenhöner, Rolf, Process and apparatus for producing a turbine component, turbine component and use of the apparatus.

    상세보기
74. Jabado, Rene; Krüger, Ursus; Körtvelyessy, Daniel; Reiche, Ralph; Rindler, Michael; Walter, Steffen, Process for applying material to a component, a fiber and a fiber mat.

    상세보기
75. Jabado, Rene; Krüger, Ursus; Körtvelyessy, Daniel; Reiche, Ralph; Rindler, Michael; Walter, Steffen, Process for applying material to a component, a fiber and a fiber mat.

    상세보기
76. Galic, Raoul; Heinecke, Brigitte; Neuhaus, Margarete; Krusch, Claus; Vosberg, Volker, Process for brazing wide gaps.

    상세보기
77. Ladru, Francis-Jurjen; Massa, Andrea; Melzer-Jokisch, Torsten; Motzkus, Ralf; Oppert, Andreas; Thomaidis, Dimitrios, Process for coating a component having partially closed holes and process for opening the holes.

    상세보기
78. Fischer,Marcus; Pfeiffer,Elmar, Process for in situ coating of turbo-machine components.

    상세보기
79. Jabado, Rene; Körtvelyessy, Daniel; Reiche, Ralph; Rindler, Michael, Process for producing a component of a turbine, and a component of a turbine.

    상세보기
80. Münzer, Jan; Podgorski, Thomas, Process for producing a hole using different laser positions.

    상세보기
81. Maxim Konter CH; Wilfried Kurz CH, Process for producing or repairing cooling channels in monocrystalline components of gas turbines.

    상세보기
82. Brenner, Berndt; Fux, Volker, Process for producing wear-resistant surface layers.

    상세보기
83. Ott, Michael; Paul, Uwe; Singer, Robert; Volek, Andreas, Process for repairing a component comprising a directional microstructure by setting a temperature gradient during the laser heat action, and a component produced by such a process.

    상세보기
84. Gourbesville, Olivier; Ferte, Jean-Pierre; Pinto, Eric; Braillard, Frédéric, Process for resurfacing a monocrystalline or directionally solidified metallic piece.

    상세보기
85. Krüger, Ursus; Körtvelyessy, Daniel; Reiche, Ralph; Steinbach, Jan; Winkler, Gabriele, Process for the surface treatment of a component, and apparatus for the surface treatment of a component.

    상세보기
86. Massa, Andrea; Wilkenhöner, Rolf; Wollnik, Adrian, Reopening of cooling-air bores using a nanosecond laser in the microsecond range.

    상세보기
87. Shubert, Gary Charles, Repair method for propagating epitaxial crystalline structures by heating to within 0-100° f of the solidus.

    상세보기
88. Halberstadt, Knut; Kyeck, Sascha Martin; Ladru, Francis-Jurjen; Siebert, Bernhard, Setting the quantity of cooling air for a turbine blade or vane by controlled overspray.

    상세보기
89. Arjakine, Nikolai; Bostanjoglo, Georg; Burbaum, Bernd; Gasser, Andres; Jambor, Torsten; Jokisch, Torsten; Linnenbrink, Stefanie; Mokadem, Selim; Ott, Michael; Pirch, Norbert; Wilkenhöner, Rolf, Single crystal welding of directionally compacted materials.

    상세보기
90. Heinz, Paul; Singer, Robert, Solder alloys for repairing a component.

    상세보기
91. Chen, Zheng; Timotin, Ovidiu, Superalloy repair welding using multiple alloy powders.

    상세보기
92. Bostanjoglo, Georg; Melzer-Jokisch, Torsten; Oppert, Andreas; Thomaidis, Dimitrios, Surface analysis for detecting closed holes, and device.

    상세보기
93. Brice, Craig A., System and method of making single-crystal structures through free-form fabrication techniques.

    상세보기
94. Hans-Peter Bossmann DE; Otto-Ernst Bernhardi DE; Hans-Joachim Schmutzler DE; Harald Reiss DE; Raiko Milanovic DE; Ludwig Weiler DE; Christoph Sommer DE; Marianne Sommer DE, Turbine blade and a method for its production.

    상세보기
95. Subramanian, Ramesh, Two-level layer system with pyrochlore phase and oxides.

    상세보기
96. Grüger, Birgit; Iordache, Lucian; Timotin, Ovidiu, Welded repair of defects lying on the inside of components.

    상세보기
97. Arjakine, Nikolai; Bostanjoglo, Georg; Burbaum, Bernd; Gasser, Andres; Jambor, Torsten; Linnenbrink, Stefanie; Melzer-Jokisch, Torsten; Ott, Michael; Pirch, Norbert; Wilkenhöner, Rolf, Welding method and component.

    상세보기
98. Burbaum, Bernd; Mokadem, Selim; Pirch, Norbert, Welding process with a controlled temperature profile and a device therefor.

    상세보기
99. Wos, Frank; Koenigsmann, Zengmei Wang, Welding single crystal articles.

    상세보기
더보기