초록 ▼

A continuously operating surface miner designed basically with a milling roller for the accurate, selective mining of sedimentary beds. The parameters cutting height, cutting width and feed speed are decisive for the performance capacity of surface miners. How the miner begins a block to be mined, h

A continuously operating surface miner designed basically with a milling roller for the accurate, selective mining of sedimentary beds. The parameters cutting height, cutting width and feed speed are decisive for the performance capacity of surface miners. How the miner begins a block to be mined, how it finishes it and changes over to a new block to be mined is significant as well. The particular technology that can be used depends essentially on the mobility of the miner and the possibility of the engagement of the milling roller with the material to be mined. A three-caterpillar chassis for the miner and for arranging the milling roller (15a) in front of the said chassis in the direction of mining is provided. The milling roller (15a) is mounted on a transverse frame (15b) and is fastened by same to the superstructure (8) of the miner. High mobility of the miner is achieved due to this arrangement of the milling roller and the use of the chassis. The miner always travels on a clean, freshly cut level, so that natural unevennesses or ditches dug to drain surface water do not interfere with the travel. Another advantage of this design is that the miner can move backward without problems, can strip corners with ease and can also open basin-shaped deposits with a circular feed movement.

대표청구항 ▼

[ What is claimed is:] [1.]1. A surface miner, comprising:a three-caterpillar chassis with two front oscillating caterpillar elements arranged in parallel to one another in the direction of mining and one rear steerable oscillating caterpillar element;a frame shaped substructure, said three oscillat

[ What is claimed is:] [1.]1. A surface miner, comprising:a three-caterpillar chassis with two front oscillating caterpillar elements arranged in parallel to one another in the direction of mining and one rear steerable oscillating caterpillar element;a frame shaped substructure, said three oscillating caterpillar elements of said caterpillar chassis are connected to one another in a statically determined three-point support by said frame-like substructure, a rear part of said support on said rear steerable oscillating caterpillar element includes a rotating fork with a rotating connection and an actuating element provided between said oscillating caterpillar and said substructure to achieve a steering movement;a superstructure arranged on said substructure in a three-point support, wherein one support point above the said rear steerable oscillating caterpillar element is formed by a support ball and the other two supports in the area of said two front oscillating caterpillar elements are formed by two linear adjusting cylinders, which can be actuated independently from one another, and two outer slideways are provided for centering and a compensating movement of said superstructure in relation to said substructure;a milling roller module with a milling roller acting as the mining member is arranged under the said superstructure in a front area in front of said three-caterpillar chassis, said milling roller rotating around a horizontal axis of rotation at substantially right angles to the direction of travel and extends over substantially the entire width of the miner;a discharge belt adjacent to said milling roller in the direction of conveying said discharge belt being led from said milling roller module between said front oscillating caterpillar elements through the superstructure to a rear area of the miner;a loading belt arranged downstream of said discharge belt;a loading boom, said discharge belt being joined with said loading belt in a pivotable and height-adjustable manner for conveying;drive units for the independent operation of the miner; anda drive container with a driver stand placed on said drive container arranged on said superstructure.