$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

Controlling a rabbet load and air/oil seal temperatures in a turbine

IPC분류정보
국가/구분 United States(US) Patent 등록
국제특허분류(IPC7판)
  • F01D-005/08
출원번호 US-0635086 (2000-08-08)
발명자 / 주소
  • Mark Christopher Schmidt
출원인 / 주소
  • General Electric Company
대리인 / 주소
    Nixon & Vanderhye P.C.
인용정보 피인용 횟수 : 9  인용 특허 : 9

초록

During a standard fired shutdown of a turbine, a loaded rabbet joint between the fourth stage wheel and the aft shaft of the machine can become unloaded causing a gap to occur due to a thermal mismatch at the rabbet joint with the bearing blower turned on. An open or unloaded rabbet could cause the

대표청구항

1. A method of operating a turbine comprising maintaining a rabbet joint load while keeping an air/oil seal temperature acceptably low by controlling a thermal parameter of the turbine with an existing turbine component, the controlling step comprising controlling a mass flow of air across a turbine

이 특허에 인용된 특허 (9)

  1. Lenahan Dean T. (Cincinnati OH) Shotts L. D. (Cincinnati OH) Shetty Bandadi S. (West Chester OH) Glover Jeffrey (Cincinnati OH), Clearance control system for separately expanding or contracting individual portions of an annular shroud.
  2. Carreno Diether E. (Schenectady NY) Myers Albert (Amsterdam NY) Palmer Gene D. (Clifton Park NY) Caruso Philip M. (Selkirk NY) Wilson Ian D. (Clifton Park NY) Hemsworth Martin C. (Cincinnati OH), Closed or open circuit cooling of turbine rotor components.
  3. Meylan Pierre (Neuenhof CHX), Compressor and method of operating it.
  4. Dziech Aaron M. ; Reisenauer Daniel E. ; Bolt William Z. ; Albrecht ; Jr. Richard W. ; Ward Steven D., Cooling air supply through bolted flange assembly.
  5. Schmidt Mark Christopher, Cooling/heating augmentation during turbine startup/shutdown using a seal positioned by thermal response of turbine parts and consequent relative movement thereof.
  6. Hayner Denis R. (Newburyport MA) Rock Peter J. (Byfield MA), Double rabbet rotor blade retention assembly.
  7. Naudet Jacky (Boudoufle FRX), Fastening spindle and method of assembly for attaching rotor elements of a gas-turbine engine.
  8. Barry Brian (Duffield GB2) Sadler John H. R. (Aston-on-Trent GB2) Allen Susan M. (Belper GB2) Artt David W. (Moira GB5), Gas turbine engine.
  9. Albrecht Richard W. (Fairfield OH) Kutney ; Jr. John T. (Cincinnati OH) Weisgerber Robert H. (Loveland OH), Turbine disk attachment system.

이 특허를 인용한 특허 (9)

  1. Jangili,Ranjit Kumar, Assembly and method for cooling rear bearing and exhaust frame of gas turbine.
  2. Karpman, Boris; Meisner, Richard P.; Lacour, Mark E., Control of engineering systems utilizing component-level dynamic mathematical model with single-input single-output estimator.
  3. Casanova, Fernando Jorge; Kumar, Rajesh; Roy, Madhumita, Fastener with radial loading.
  4. Munshi, Mrinal; Finneran, John W.; Shteyman, Yevgeniy; Graber, Daryl J.; Porter, Matthew R.; Leagon, Jonathan M., Gas turbine outer case active ambient cooling including air exhaust into sub-ambient cavity.
  5. Karpman, Boris; Meisner, Richard P.; Shade, John L., High fidelity integrated heat transfer and clearance in component-level dynamic turbine system control.
  6. Karpman, Boris; Roadinger, Thomas J.; Meisner, Richard P., Robust flow parameter model for component-level dynamic turbine system control.
  7. Seely, William Forrester, System and method to performance tune a system.
  8. Rodriguez, Jose L.; Little, David A.; Zhang, Jiping; Chehab, Abdullatif M., Temperature control within a cavity of a turbine engine.
  9. Army, Donald E.; McAuliffe, Christopher, Variable-sized cooling air flow path.
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트