초록 ▼

A valve (105) controls fluid flow in a microfluidic system (100). The valve (105) has an input port adapted to receive fluid exerting a predetermined level of pressure on the valve (105) and an output port. The valve (105) has a variable sized aperture disposed perpendicular to the flow of the fluid

A valve (105) controls fluid flow in a microfluidic system (100). The valve (105) has an input port adapted to receive fluid exerting a predetermined level of pressure on the valve (105) and an output port. The valve (105) has a variable sized aperture disposed perpendicular to the flow of the fluid (119). The aperture varies in size between a relatively small aperture (137) and a relatively large aperture (151). The small aperture (137) prevents the flow of the fluid (119) through the valve (105) responsive to a relatively high level of capillary forces between the fluid (119) and the valve (105) in the small aperture (137). The large aperture (151) permits the flow of the fluid (119) through the valve (105) responsive to a relatively low level of capillary forces between the fluid (119) and the valve (105) in the large aperture (151).

대표청구항 ▼

A valve (105) controls fluid flow in a microfluidic system (100). The valve (105) has an input port adapted to receive fluid exerting a predetermined level of pressure on the valve (105) and an output port. The valve (105) has a variable sized aperture disposed perpendicular to the flow of the fluid

A valve (105) controls fluid flow in a microfluidic system (100). The valve (105) has an input port adapted to receive fluid exerting a predetermined level of pressure on the valve (105) and an output port. The valve (105) has a variable sized aperture disposed perpendicular to the flow of the fluid (119). The aperture varies in size between a relatively small aperture (137) and a relatively large aperture (151). The small aperture (137) prevents the flow of the fluid (119) through the valve (105) responsive to a relatively high level of capillary forces between the fluid (119) and the valve (105) in the small aperture (137). The large aperture (151) permits the flow of the fluid (119) through the valve (105) responsive to a relatively low level of capillary forces between the fluid (119) and the valve (105) in the large aperture (151). and a second elongated tube connected to the inlet fitting and the valve housing and including a flow sensor. The valve housing is connected to a magnetostrictive actuator including an elongated actuator member disposed in a conduit connected to the valve housing and serving as part of the fluid flow path through the apparatus. An electromagnetic coil is disposed about the conduit and the actuator and is responsive to energization to effect controlled elongation of the actuator to control the position of a valve closure member disposed in the valve housing. Adjustments to full-scale flow ranges of the apparatus may be obtained by inserting a tube or wire in the flow sensor tube to act as a flow restrictor. . . . crofluidics.doc. Schomburg, W. K., et al., "Microfluidic components in LIGA technique" (Feb 1994) J. Micromech.4:186-191. Weigl, B., et al., "Passive Microfluidics--Ultra-Low-Cost Plastic Disposable Lab-On-A-Chips". Verpoorte, Elisabeth M. J., et al., "Three-dimensional micro flow manifolds for miniaturized chemical analysis systems" (Oct 1994) J. Micromech. Microoeng.4:246-256.