초록 ▼

An electronic control systems and process for infusion devices and pump configurations can provide highly efficient use of electrical power. The system may include a capacitor which is controlled to partially, but not fully discharge, to provide a power pulse to a pump coil. In this manner, the capa

An electronic control systems and process for infusion devices and pump configurations can provide highly efficient use of electrical power. The system may include a capacitor which is controlled to partially, but not fully discharge, to provide a power pulse to a pump coil. In this manner, the capacitor remains partially charged and need not be re-charged from a fully discharged state. In addition, the power applied to the coil in a given discharge pulse signal may be controlled to correspond to the power needs of the pump, by controlling the degree to which the capacitor is discharged to produce the pulse signal. A power cut-off switch may be provided to control the discharge of the capacitor such that the capacitor is stopped from discharging prior to the actual end of the armature stroke. The time at which the capacitor discharge is stopped may be selected such that energy remaining in the coil after the capacitor stops discharging is sufficient to continue the pump stroke to the actual end of the stroke. The time at which the capacitor discharge is cut off may be based on the location of the armature in its stroke motion. A power disconnect switch may be provided between the capacitor and the battery, to allow the capacitor to be electrically disconnected from the battery during storage or other periods of non-use, to avoid losing battery power due to the inherent leakage of the capacitor during prolonged periods of non-use.

대표청구항 ▼

An electronic control systems and process for infusion devices and pump configurations can provide highly efficient use of electrical power. The system may include a capacitor which is controlled to partially, but not fully discharge, to provide a power pulse to a pump coil. In this manner, the capa

An electronic control systems and process for infusion devices and pump configurations can provide highly efficient use of electrical power. The system may include a capacitor which is controlled to partially, but not fully discharge, to provide a power pulse to a pump coil. In this manner, the capacitor remains partially charged and need not be re-charged from a fully discharged state. In addition, the power applied to the coil in a given discharge pulse signal may be controlled to correspond to the power needs of the pump, by controlling the degree to which the capacitor is discharged to produce the pulse signal. A power cut-off switch may be provided to control the discharge of the capacitor such that the capacitor is stopped from discharging prior to the actual end of the armature stroke. The time at which the capacitor discharge is stopped may be selected such that energy remaining in the coil after the capacitor stops discharging is sufficient to continue the pump stroke to the actual end of the stroke. The time at which the capacitor discharge is cut off may be based on the location of the armature in its stroke motion. A power disconnect switch may be provided between the capacitor and the battery, to allow the capacitor to be electrically disconnected from the battery during storage or other periods of non-use, to avoid losing battery power due to the inherent leakage of the capacitor during prolonged periods of non-use. sections where access to the openings from the sides of the wire facing unit is difficult.