초록 ▼

Upon incompletion of abnormality detection of an air-fuel ratio sensor provided in an exhaust pipe of an engine during operation of the engine (steps S310 and S320), when the state of charge SOC of a battery is lower than a preset reference charge level Sref or when the accelerator opening Acc is no

Upon incompletion of abnormality detection of an air-fuel ratio sensor provided in an exhaust pipe of an engine during operation of the engine (steps S310 and S320), when the state of charge SOC of a battery is lower than a preset reference charge level Sref or when the accelerator opening Acc is not less than a preset reference opening Aref (steps S330 and S340), the abnormality detection is not performed (step S350). When the state of charge SOC of the battery is not lower than the preset reference charge level Sref and when the accelerator opening Acc is less than the preset reference opening Aref (steps S330 and S340), the abnormality detection is performed to identify abnormality or normality of the air-fuel ratio sensor based on an air fuel ratio AF output from the air-fuel ratio sensor (steps S360 to S420). The drive control cuts off a fuel supply to the engine, controls a motor to enable motoring of the engine, and ensures output of a torque demand to a driveshaft, while the abnormality detection is performed.

대표청구항 ▼

What is claimed is: 1. A power output apparatus constructed to output power to a driveshaft, the power output apparatus comprising: an internal combustion engine; an electric power-mechanical power input output assembly connected with the driveshaft and with an output shaft of the internal combusti

What is claimed is: 1. A power output apparatus constructed to output power to a driveshaft, the power output apparatus comprising: an internal combustion engine; an electric power-mechanical power input output assembly connected with the driveshaft and with an output shaft of the internal combustion engine in a rotatable manner independently of the driveshaft and configured to output a torque to the driveshaft and to the output shaft through input and output of electric power and mechanical power; a motor designed to input and output power from and to the driveshaft; an accumulator arranged to transmit electric power to and from the electric power-mechanical power input output assembly and the motor; an oxygen content detector located in an exhaust system of the internal combustion engine and designed to measure a concentration of oxygen included in an exhaust gas of the internal combustion engine; a charge level computation module configured to compute a charge level of the accumulator; a driving force demand setting module configured to set a driving force demand required for the driveshaft; and a controller configured to respond to an abnormality detection request for executing abnormality detection to identify abnormality or normality of the oxygen content detector during operation of the internal combustion engine, wherein when the computed charge level of the accumulator is lower than a preset reference charge level, said controller determines non-execution of the abnormality detection of the oxygen content detector regardless of the abnormality detection request, while controlling the internal combustion engine, the electric power-mechanical power input output assembly, and the motor to ensure output of a driving force corresponding to the set driving force demand to the driveshaft, and wherein when the computed charge level of the accumulator is not lower than the preset reference charge level, said controller determines to cut off a fuel supply to the internal combustion engine and execute the abnormality detection of identifying abnormality or normality of the oxygen content detector based on an output of the oxygen content detector, while controlling the internal combustion engine, the electric power-mechanical power input output assembly, and the motor to ensure output of a driving force corresponding to the set driving force demand to the driveshaft. 2. The power output apparatus in accordance with claim 1, wherein even if the computed charge level of the accumulator is not lower than the preset reference charge level, when the set driving force demand is not less than a preset reference driving force, the controller determines non-execution of the abnormality detection of the oxygen content detector while controlling the internal combustion engine, the electric power-mechanical power input output assembly, and the motor to ensure output of the driving force corresponding to the set driving force demand to the driveshaft. 3. The power output apparatus in accordance with claim 1, wherein the electric power-mechanical power input output assembly has: a generator designed to input and output power; and a three shaft-type power input output structure connected to three shafts, the driveshaft, the output shaft of the internal combustion engine, and a rotating shaft of the generator, and designed to input and output power to a residual shaft based on powers input from and output to any two shafts among the three shafts. 4. A vehicle, comprising: an internal combustion engine; an electric power-mechanical power input output assembly connected to a driveshaft linked with an axle of the vehicle and to an output shaft of the internal combustion engine in a rotatable manner independently of the driveshaft and configured to output a torque to the driveshaft and to the output shaft through input and output of electric power and mechanical power; a motor designed to input and output power from and to the driveshaft; an accumulator arranged to transmit electric power to and from the electric power-mechanical power input output assembly and the motor; an oxygen content detector located in an exhaust system of the internal combustion engine and designed to measure a concentration of oxygen included in an exhaust gas of the internal combustion engine; a charge level computation module configured to compute a charge level of the accumulator; a driving force demand setting module configured to set a driving force demand required for the driveshaft; and a controller configured to respond to an abnormality detection request for executing abnormality detection to identify abnormality or normality of the oxygen content detector during operation of the internal combustion engine, wherein when the computed charge level of the accumulator is lower than a preset reference charge level, said controller determines non-execution of the abnormality detection of the oxygen content detector regardless of the abnormality detection request, while controlling the internal combustion engine, the electric power-mechanical power input output assembly, and the motor to ensure output of a driving force corresponding to the set driving force demand to the driveshaft, and wherein when the computed charge level of the accumulator is not lower than the preset reference charge level, said controller determines to cut off a fuel supply to the internal combustion engine and execute the abnormality detection of identifying abnormality or normality of the oxygen content detector based on an output of the oxygen content detector, while controlling the internal combustion engine, the electric power-mechanical power input output assembly, and the motor to ensure output of a driving force corresponding to the set driving force demand to the driveshaft.