초록 ▼

Fuel management system for efficient operation of a spark ignition gasoline engine. Injectors inject an anti-knock agent such as ethanol directly into a cylinder of the engine. A fuel management microprocessor system controls injection of the anti-knock agent so as to control knock and minimize that

Fuel management system for efficient operation of a spark ignition gasoline engine. Injectors inject an anti-knock agent such as ethanol directly into a cylinder of the engine. A fuel management microprocessor system controls injection of the anti-knock agent so as to control knock and minimize that amount of the anti-knock agent that is used in a drive cycle. It is preferred that the anti-knock agent is ethanol. The use of ethanol can be further minimized by injection in a non-uniform manner within a cylinder. The ethanol injection suppresses knock so that higher compression ratio and/or engine downsizing from increased turbocharging or supercharging can be used to increase the efficiency of the engine.

대표청구항 ▼

1. A spark ignition engine which utilizes port fuel injection and direct fuel injection; and where the ratio of directly injected fuel to port injected fuel increases above a selected value of torque ; and where at some value of torque above the selected value the engine is either fueled by a combin

1. A spark ignition engine which utilizes port fuel injection and direct fuel injection; and where the ratio of directly injected fuel to port injected fuel increases above a selected value of torque ; and where at some value of torque above the selected value the engine is either fueled by a combination of port fuel injection and direct injection or is fueled by direct injection alone. 2. The spark ignition engine of claim 1 where above the selected value of torque the ratio of directly injected fuel to port injected fuel is increased as the torque is increased. 3. The spark ignition engine of claim 2 where the ratio of directly injected fuel to port injected fuel is increased so as to prevent knock. 4. The spark ignition engine of claim 1 where above the selected value of torque the engine is fueled by direct injection alone. 5. The spark ignition engine of claim 1 where below the selected value of torque the engine is fueled by port fuel injection alone. 6. The spark ignition engine of claim 1 where the engine is operated with a substantially stoichiometric fuel lair ratio above a selected value of torque. 7. The spark ignition engine of claim 1 where ethanol is introduced into the engine. 8. The spark ignition engine of claim 7 where the fuel anagement system uses a microprocessor. 9. The spark ignition engine of claim 7 where ethanol is directly injected into the engine cylinders. 10. The spark ignition engine of claim 7 where the engine is fueled with ethanol and gasoline. 11. The spark ignition engine of claim 7 where at he highest torque all of the fuel is directly injected. 12. The spark ignition engine of claim 7 where the fuel that is port fuel injected is better mixed than the fuel that is directly injected. 13. The spark ignition engine of claim 1 where gasoline is introduced into the engine. 14. The spark ignition engine of claim 1 where fuel that is port fuel injected is better mixed than the fuel that is directly injected. 15. A spark ignition engine that is fueled with a ratio of directly injected fuel to port injected fuel that increases with increasing torque; and where a fuel management system increases the ratio of directly injected fuel to port injected fuel with increasing torque so that it is sufficient to prevent knock; and where the engine is operated with substantially stoichiometric fuel/air ratio. 16. The spark ignition engine of claim 15 where information from a knock detector is used to control the ratio of directly injected to port injected fuel. 17. The spark ignition engine of claim 15 where information from a look up table is used to control the ratio of directly injected to port injection fuel. 18. The spark ignition engine of claim 15 where the fuel management system minimizes the amount of directly injected fuel while providing sufficient directly injected fuel to prevent knock.