초록

A countercurrent spray nozzle injects fuel into the intake manifold of an internal combustion engine to give better mixing of fuel and air. Better mixing results in less NOx and less incomplete combustion of carbon.

대표청구항 ▼

1. A fuel injector assembly for mixing a jet of fuel spray and a flow of air in a combustion engine comprising, an injector valve;an extension coupled to the injector valve;a reversing block coupled to the extension; anda nozzle coupled to the reversing block, the nozzle being configured to direct t

1. A fuel injector assembly for mixing a jet of fuel spray and a flow of air in a combustion engine comprising, an injector valve;an extension coupled to the injector valve;a reversing block coupled to the extension; anda nozzle coupled to the reversing block, the nozzle being configured to direct the jet of fuel axially countercurrent to the flow of air in the combustion engine. 2. The fuel injector assembly of claim 1, wherein the extension is bent to position the nozzle in the center of an air duct and aim the nozzle axially countercurrent to the flow of air when the flow of air is at its peak velocity. 3. The fuel injector assembly of claim 1, further comprising a spinner configured for positioning between the nozzle and the reversing block. 4. The fuel injector assembly of claim 3, wherein the spinner is configured to angularly direct the jet of fuel upon exit of the jet of fuel from the nozzle. 5. A method for mixing a pressurized fine fuel spray for a fuel from a power controlled valve with a fuel combustion air for the fuel for an internal combustion cylinder in an air duct before and adjacent to a cylinder intake valve and during an intake cycle of the cylinder intake valve, the method comprising: mounting of a spray nozzle before and adjacent to the cylinder intake valve andinjecting the fuel spray from the nozzle axially and countercurrent to peak velocity of the fuel combustion air so that initial relative velocity between the fuel spray and said air is maximum. 6. The method of claim 5, wherein sprayed droplets of the fuel spray are fine enough to be deflected laterally in all directions from an outlet of a countercurrent nozzle toward the perimeter of the air duct by peak velocity combustion air. 7. The method of claim 5, wherein an extending and directional element following a powered fuel valve places the spray nozzle aimed axially and countercurrent to peak velocity of incoming combustion air in its duct and adjacent to an intake valve. 8. A countercurrent fuel injector assembly for an internal combustion engine, comprising: an electrically operated off-on fuel valve, said valve embodying a glue surface,an adaptor, said adaptor embodying a connector, said connector embodying a glue surface and indexing tabs, said adaptor being welded to a connecting tube, said tube being welded and connected to a reversing bock, a spray nozzle embodying a staked in place spinner, said spray nozzle being pin connected and gasket sealed or welded to said reversing block, said valve being suitable for operation by a power control system of an engine, said valve being glue joined and gasket sealed to said adaptor, said adaptor embodying a gasket seal between said adaptor and an injector port from the engine, said indexing tabs being unique to fit matching notches in an injector port of a matching injector, said tube being curved and said reversing block being oriented to axially direct said fuel countercurrent to peak combustion air and to place the bend of said reversing block below the outlet of said spray nozzle.