초록 ▼

A voltage control arrangement for a system of multiple windfarms with transmission lines. Voltage is regulated at a point of regulation on the system, such as a high voltage substation or other system bus. Regulation is achieved at the point of regulation by sensing the voltage, comparing to a refer

A voltage control arrangement for a system of multiple windfarms with transmission lines. Voltage is regulated at a point of regulation on the system, such as a high voltage substation or other system bus. Regulation is achieved at the point of regulation by sensing the voltage, comparing to a reference voltage, and adjusting the reactive power output of the wind turbines and other equipment in the system. The regulation point may be shifted to another point if needed to respect voltage limits at that points of the system after attempting to shift reactive load to restore voltage within limits at the other points in the system. The reference voltage may be adjusted to minimize losses for the system of multiple windfarms and transmission lines. A loss optimizing algorithm is applied to the combined multiple windfarm and transmission line to shift reactive load among local windfarms to minimize losses and to shift reactive load among individual wind turbines within an individual windfarm.

대표청구항 ▼

1. A method for optimizing system loss for a system of multiple individual local windfarms including transmission lines, comprising: distributing a total reactive command for the system of multiple individual windfarms according to a loss optimization algorithm for the overall system; anddistributin

1. A method for optimizing system loss for a system of multiple individual local windfarms including transmission lines, comprising: distributing a total reactive command for the system of multiple individual windfarms according to a loss optimization algorithm for the overall system; anddistributing reactive commands assigned to individual windfarms to individual wind turbines according to a loss optimization algorithm for each individual windfarm. 2. The method of claim 1, further comprising assigning the reactive commands to individual windfarms so that a sum of the reactive commands equals the total reactive command and a partial derivative of losses with respect to reactive output is equal in steady-state for each individual windfarm. 3. The method of claim 2, wherein assigning the reactive commands to individual windfarms so that a sum of the reactive loads equals the total reactive load and a partial derivative of losses with respect to reactive output is equal in steady-state for each individual windfarm comprises assigning the reactive commands to individual windfarms using a predictor-corrector approach. 4. The method of claim 1, wherein a transmission line is located between a point of common coupling of the individual windfarms and a point of interconnection with a grid. 5. The method of claim 4, wherein distributing a total reactive command for the system of multiple individual windfarms according to a loss optimization algorithm for the overall system comprises establishing a reference voltage V0ref at the point of common coupling in order to minimize losses at the point of interconnection. 6. The method of claim 5, wherein establishing a reference voltage V0ref at the point of common coupling in order to minimize losses at the point of interconnection comprises: determining parameters for a transmission line model;determining dL0/dV0 based on the transmission line model; and,determining dLtotal/dV0 according to an equation: dLtotal/dV0=dL0/dV0+sum(dLWFi/dV0), where dLWFi/dV0 represents a sensitivity of total windfarm loss for windfarm “i” due to changing V0. 7. The method of claim 6, further comprising: determining dV0/dQ0 based on the transmission model; and,determining dLWFi/dV0 according to an equation: dLWFi/dV0=dLi/dV0+FQWFi*(dLi/dQi)/(dV0/dQ0), wherein FQWFi represents a fraction of reactive capability of windfarm “i” relative to total reactive capability of all the individual windfarms.