An asymmetric tetrahedral vortex generator that provides for control of three-dimensional flow separation over an underlying surface by bringing high momentum outer region flow to the wall of the structure using the generated vortex. The energized near-wall flow remains attached to the structure sur
An asymmetric tetrahedral vortex generator that provides for control of three-dimensional flow separation over an underlying surface by bringing high momentum outer region flow to the wall of the structure using the generated vortex. The energized near-wall flow remains attached to the structure surface significantly further downstream. The device produces a swirling flow with one stream-wise rotation direction which migrates span-wise. When optimized, the device produces very low base drag on structures by keeping flow attached on the leeside surface thereof. This device can: on hydraulic structures, prevent local scour, deflect debris, and reduce drag; improve heat transfer between a flow and an adjacent surface, i.e., heat exchanger or an air conditioner; reduce drag, flow separation, and associated acoustic noise on airfoils, hydrofoils, cars, boats, submarines, rotors, etc. during subsonic or supersonic conditions; and, reduce radar signatures by using faceted edges with angles amenable to stealth technologies.
대표청구항▼
1. An asymmetric tetrahedral vortex generator for placement on a surface, comprising: an elongated tetrahedral shape joined along sharp edges and defined by four triangular sides including a base, a leeward side, a windward side, and a side face, the overall proportions of the shape characterized by
1. An asymmetric tetrahedral vortex generator for placement on a surface, comprising: an elongated tetrahedral shape joined along sharp edges and defined by four triangular sides including a base, a leeward side, a windward side, and a side face, the overall proportions of the shape characterized by the values L2, L1, h2 and h1, wherein L1 is an overall length of the side face along the base, L2 is a length to a widest dimension of the base from a windward most aspect of the shape, h2 is an overall height of said shape from the base, and h1 is a width of the base at its widest section, wherein a ratio of L2/L1 is between 0.5 to less than 1.0, h1/L1 is between 0.25 to 0.4, and h2/L1 is between 0.25 and 0.4. 2. A vortex generator as in claim 1, wherein: said generator is mounted on a surface of a hydraulic structure fairing element for preventing local scour, providing debris deflection, and reducing drag around said structures and positioned at a height above a bed of a body of water in which said hydraulic structure is installed. 3. A vortex generator as in claim 1, wherein: said generator is mounted on an aerodynamic body surface for reducing drag and suppressing flow separation, said generator mounted a longitudinal distance upstream of where an adverse or positive pressure gradient occurs so as to energize low speed flow in the near wall region thereby delaying flow separation and reducing drag and associated flow-generated acoustic noise. 4. A vortex generator as claim 3, wherein: said generators are installed on said surface with faceted edges thereof and accompanying angles selected so as to reduce a radar signature of said generator and create a low observability flow control device. 5. A vortex generator as in claim 4, wherein: said vortex generator is installed for supersonic flow overexpanded conditions, surfaces of said generator acting as 3D flow ramps to improve expansion performance of nozzles such as those on tactical aircraft during takeoff. 6. A vortex generator as in claim 1, wherein: said generator is installed as part of an array of generators for improving heat transfer inside a heat exchanger wherein said array increase the mixing rate of a flow through said heat exchange device.
연구과제 타임라인
LOADING...
LOADING...
LOADING...
LOADING...
LOADING...
이 특허에 인용된 특허 (5)
Schenk Karl M. (Wichita KS) Reynolds Peter T. (Wichita KS) Abla M. H. (Wichita KS) Wattson ; Jr. Robert K. (Wichita KS), Airstream modification device for airfoils.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.