초록 ▼

A method and device for precise control of and controller design for aircrafts consisting of at least one spinning part and at least one non-spinning part is provided. The required torques for control of the spinning parts and for the non-spinning parts are continuously and individually calculated.

A method and device for precise control of and controller design for aircrafts consisting of at least one spinning part and at least one non-spinning part is provided. The required torques for control of the spinning parts and for the non-spinning parts are continuously and individually calculated. All torques are combined to get the correct torque for the complete aircraft. Doing this, it's possible to continuously apply the correct torque, both correctly distributed among the roll and pitch axes (correct angle), and correct magnitude. The result is a decoupling of the roll and pitch axes, simplifying controller design to a design of two single input single output controllers, one for each axe.

대표청구항 ▼

1. A flight control device outputting actuator steering commands in the yaw, pitch and roll domain from an angular velocity rate control input (wi) controlling a rotary wing aircraft comprising at least one rotor and one fuselage, the flight control device comprising: a rate controller deriving requ

1. A flight control device outputting actuator steering commands in the yaw, pitch and roll domain from an angular velocity rate control input (wi) controlling a rotary wing aircraft comprising at least one rotor and one fuselage, the flight control device comprising: a rate controller deriving requested angular velocity (w) and angular acceleration (wdot) from wi and a measured velocity rate (wg);an actuator controller deriving actuator steering commands by an aerodynamic function (F2) being modeled by at least the aerodynamics of the rotary wing aircraft; anda torque controller device deriving required torque (T) corresponding to w and wdot by a torque function F1 being dependent of w, wdot, the inertia of the fuselage (If) and the inertia of the rotor (Ir), the torque function device being coupled between the rate controller and the actuator controller, having the outputs w and wdot from the rate controller as inputs and providing T as input to the actuator controller. 2. The flight control device of claim 1, wherein the torque controller device further comprises: a first matrix multiplier multiplying If and wdot resulting in a fuselage torque (Tf2) required to achieve one of the requested angular acceleration and motion;a first adder adding the angular velocity (wf) of the fuselage and the angular velocity (wr) of the rotor;a second matrix multiplier multiplying Ir and the sum of wf and wr resulting in an angular momentum of the rotor (B);a cross product multiplier deriving the cross product of w and B resulting a rotor torque (Tr) required to achieve the requested angular velocity; anda second adder, adding Tf2 and Tr resulting in T. 3. The flight control device of claim 1, wherein wf is set to wg. 4. The flight control device of claim 1, wherein wf is set to w. 5. The flight control device of claim 1, wherein a sensor system comprising gyros adjusted to sense wg. 6. The flight control device of claim 1, wherein the rate controller further includes: a subtractor subtracting wg from wi resulting in a rate error (we);a loop gain amplifying we by a function H resulting in Hwe;a third adder adding wi and Hwe, resulting in w; anda derivator deriving the derivative of w resulting in wdot. 7. The flight control device of claim 1, wherein the actuator controller is adjusted to apply the actuator commands to the rotary wing aircraft. 8. The flight control device of claim 1, wherein an attitude controller deriving wi from an attitude request (att_req) provided by a control device operated by a user and an estimated attitude. 9. A method of flight control for outputting actuator steering commands in the yaw, pitch and roll domain from an angular velocity rate control input (wi) controlling a rotary wing aircraft comprising at least one rotor and one fuselage, the method comprising: deriving requested angular velocity (w) and angular acceleration (wdot) from wi and a measured velocity rate (wg);deriving actuator commands by an aerodynamic function (F2) being modeled by at least the aerodynamics of the rotary wing aircraft dependent of the required torque (T) corresponding to w and wdot;deriving T by a torque function F1 being dependent of w, wdot, the inertia of the fuselage (If) and the inertia of the rotor (Ir); andproviding the derived T as input function F2. 10. The method of claim 9, wherein deriving T further includes: multiplying If and wdot resulting in a fuselage torque (Tf2) required to achieve one of the requested angular acceleration and motion;adding the angular velocity (wf) of the fuselage and the angular velocity (wr) of the rotor;multiplying Ir and the sum of wf and wr resulting in an angular momentum of the rotor (B);deriving the cross product of w and B resulting a rotor torque (Tr) required to achieve the requested angular velocity; andadding Tf2 and Tr resulting in T. 11. The method of claim 9, wherein wf is set to wg. 12. The method of claim 9, wherein that wf is set to w. 13. The method of claim 9, further comprising sensing wg by one or more gyros provided in the rotary wing aircraft. 14. The method of claim 9, wherein deriving w and wdot further includes: subtracting wg from wi resulting in a rate error (we);amplifying we by a function H resulting in Hwe;adding wi and Hwe, resulting in w; andderiving the derivative of w resulting in wdot. 15. The method of claim 9, wherein deriving actuator steering commands further includes applying the actuator commands to the rotary wing aircraft. 16. The method of claim 9, further comprising deriving wi from an attitude request (att_req) provided by a control device operated by a user and an estimated attitude.