초록

A surf disc has a planar bottom surface and parallel top surface with an upwardly extending hemispherical dome. An annular thumb recess is formed in the top surface and a frusto-conical rocker is formed in the bottom surface.

대표청구항 ▼

1. A surf disc system (10) adapted to be thrown in a spinning motion the system comprising, in combination: a planar bottom surface (14) having a circular periphery with a diameter of 7.38 inches plus or minus 10 percent, the bottom surface being in a base plane, the bottom surface and the system ha

1. A surf disc system (10) adapted to be thrown in a spinning motion the system comprising, in combination: a planar bottom surface (14) having a circular periphery with a diameter of 7.38 inches plus or minus 10 percent, the bottom surface being in a base plane, the bottom surface and the system having a vertical central axis, the system being symmetric around the central axis;a frusto-conical lower exterior surface (18) having a circular lower edge (18B) adjacent to the periphery of the bottom surface, the lower exterior surface having a circular upper edge (18A) with a diameter greater than the periphery of the bottom surface, the lower exterior surface forming an angle with the base plane of 58 degrees plus or minus 10 percent;a frusto-conical rocker (22) formed between the bottom surface and the lower edge of the lower exterior surface, the rocker extending out from the base plane at 3.7 degrees plus or minus 10 percent;an upper exterior surface (26) having a semicircular cross section with a circular lower edge (26B) adjacent to the upper edge of the lower exterior surface, the upper exterior surface having a circular upper edge (26A) with a diameter essentially equal to the diameter of the lower edge of the upper exterior surface, the upper exterior surface having a maximum diameter of 11.86 inches plus or minus 10 percent;a planar top surface (30) having an interior edge (30A) and an exterior edge (30B), the exterior edge adjacent to the upper edge of the upper exterior surface, the top surface being parallel with the bottom surface, the top surface being spaced from the bottom surface by 1.40 inches plus or minus 10 percent;a hemispherical dome (34) extending upwardly from the top surface for 2.0 inches plus or minus 10 percent, the dome having a lower periphery concentric with the exterior edge of the top surface, the lower periphery of the dome having a diameter of 7.00 inches plus or minus 10 percent, the dome adapted to keep the system centrally weighted for allowing the rocker to have full effect especially during windy conditions; andan annular thumb-receiving recess (38) formed in the top surface essentially midway between the dome and the upper edge of the exterior surface, the annular recess having a radius of curvature of 0.44 inches plus or minus 10 percent;the system being fabricated of a soft, lighter-than-water, elastomeric material.