초록 ▼

A broadcast and receiver system for performing content from combined A/53 and A/153 standard transmissions enabling simultaneous reception of both signal types with one device. A combination HDTV/Mobile DTV chip can be used that does not alter the legacy HDTV forward error correction (FEC) decoder a

A broadcast and receiver system for performing content from combined A/53 and A/153 standard transmissions enabling simultaneous reception of both signal types with one device. A combination HDTV/Mobile DTV chip can be used that does not alter the legacy HDTV forward error correction (FEC) decoder and Mobile DTV standard transmissions may include extra training signals aiding the demodulation of legacy HDTV reception. Two separate Trellis decoders can be used: one for A/53 legacy HDTV decoding and the other for A/153 Mobile DTV decoding that uses a Hard Input Hard Output (HIHO) type of architecture. Separate Viterbi decoders are allocated for each block of data with a block Viterbi rotator to parse out/collect results of each Viterbi decoder. Each block has its convolutional encoder reset at the beginning. The second Trellis decoder operates serially so as not to disturb the A/53 HDTV data but could also be operated in parallel.

대표청구항 ▼

1. An apparatus for processing a combined A/53 and A/153 standard broadcast signal, comprising: (a) a receiver with a decoder and an output, the receiver configured to receive a combined A/53 and A/153 RF signal and provide an output transport signal stream; and(b) programming executable on a proces

1. An apparatus for processing a combined A/53 and A/153 standard broadcast signal, comprising: (a) a receiver with a decoder and an output, the receiver configured to receive a combined A/53 and A/153 RF signal and provide an output transport signal stream; and(b) programming executable on a processor of the decoder processing the received combined signal, the processing comprising: (i) sub-processing an A/53 signal component with a first Trellis decoder without editing;(ii) sub-processing an A/153 signal component, the sub-processing comprising: packet formatting the A/153 signal component;group formatting the formatted packets;block encoding the group formatted packets with a second Trellis decoder; andframing the encoded group formatted packets; and(iii) presenting a transport stream of processed signals for audio/visual decoding through the output. 2. An apparatus as recited in claim 1, wherein the first Trellis decoder is a Viterbi decoder and the second Trellis decoder is a second Viterbi decoder. 3. An apparatus as recited in claim 1, wherein the second Trellis decoder has a Hard Input Hard Output (HIHO) type of architecture. 4. An apparatus as recited in claim 1, wherein said group formatting of said A/153 signal component sub-processing comprises A/53 interleaving. 5. An apparatus as recited in claim 1, wherein said block encoding of said A/153 signal component sub-processing comprises: MH framing;A/153 symbol interleaving;encoding with the second Trellis decoder; andserial concatenated convolutional code (SCCC) framing. 6. An apparatus as recited in claim 1, wherein said sub-processing of the A/53 signal component further comprises the steps of: multiplexing the received A/53 signal;field synchronizing the multiplexed signal;mapping the synchronized signal;decoding the mapped signal with a first Trellis decoder without edits;interleaving trellis decoded data;decoding data with an Reed-Solomon (RS) decoder;randomizing RS decoded data; anddeframing. 7. An apparatus for processing a combined A/53 and A/153 standard broadcast signal, comprising: (a) a receiver with a decoder and an output, the receiver configured to receive a combined A/53 and A/153 RF signal and provide an output transport signal stream; and(b) programming executable on a processor of the decoder processing the received combined signal, the processing comprising: (i) sub-processing an A/53 signal component with a first Viterbi decoder without editing;(ii) sub-processing of an A/153 signal component, the sub-processing comprising: MPEG synchronization and MHE packet formatting of the A/153 signal component;group formatting the formatted packets;block encoding the group formatted packets with a second Viterbi decoder using assigned Log Likelihood Ratio (LLR) numbers from a table of LLR numbers; andframing the encoded group formatted packets; and(iii) presenting a transport stream of processed signals for audio/visual decoding through the output. 8. An apparatus as recited in claim 2, wherein said second Viterbi decoder comprises a block Viterbi rotator, said rotator dedicating a Viterbi decoder for each data block and sequentially initializing each dedicated Viterbi decoder. 9. An apparatus as recited in claim 8, wherein each Viterbi decoder dedicated by said block rotator shifts out the last values from the last block while resetting itself for the next block. 10. An apparatus as recited in claim 2, wherein said sub-processing with a second Viterbi decoder further comprises assigning Log Likelihood Ratio (LLR) numbers from a table of LLR numbers. 11. An apparatus as recited in claim 10, wherein said assignment of Log Likelihood Ratio (LLR) numbers comprises: acquiring hamming distances;spacing the hamming distances to produce assignment values;increasing or decreasing an assignment value by +/−1 based on adjacent bit similarity; anditeratively adjusting assigned values until an optimal bit error rate is obtained to produce final LLR numbers. 12. An apparatus as recited in claim 1, wherein said packet formatting of said A/153 signal component sub-processing comprises MPEG synchronization and MHE packet formatting. 13. An apparatus as recited in claim 7, wherein said assignment of Log Likelihood Ratio (LLR) numbers comprises: acquiring hamming distances;spacing the hamming distances to produce assignment values;increasing or decreasing an assignment value by +/−1 based on adjacent bit similarity; anditeratively adjusting assigned values until an optimal bit error rate is obtained to produce final LLR numbers. 14. An apparatus as recited in claim 7, wherein said second Viterbi decoder comprises a block Viterbi rotator, said rotator dedicating a Viterbi decoder for each data block and sequentially initializing each dedicated Viterbi decoder. 15. An apparatus as recited in claim 8, wherein each Viterbi decoder dedicated by said block rotator shifts out the last values from the last block while resetting itself for the next block. 16. An apparatus as recited in claim 1, wherein said framing of said A/153 signal component sub-processing comprises: Reed-Solomon (ES) framing;Reed-Solomon Cyclic Redundancy Check (RS-CRC) decoding; andrandomizing the decoded signal. 17. A method for processing a combined A/53 and A/153 standard broadcast signal, comprising: receiving an RF signal with combined A/53 and A/153 signals;sub-processing an A/53 signal component with a Trellis decoder without edits;sub-processing an A/153 signal component with a second Trellis decoder; andpresenting a transport stream of processed signals for audio/visual decoding. 18. A method as recited in claim 17, wherein said sub-processing of the A/153 signal component further comprises: packet formatting the A/153 signal component; group formatting the formatted packets;block encoding the group formatted packets with the second Trellis decoder; andframing the encoded packets. 19. A method as recited in claim 17, wherein the first Trellis decoder is a Viterbi decoder and the second Trellis decoder is a block Viterbi rotator, said rotator dedicating a Viterbi decoder for each data block and sequentially initializing each dedicated Viterbi decoder and shifting out the last values from the last block while resetting itself for the next block. 20. A method as recited in claim 19, wherein said sub-processing with a second Viterbi decoder further comprises assigning Log Likelihood Ratio (LLR) numbers from a table of LLR numbers, the table generated by: acquiring hamming distances;spacing the hamming distances to produce assignment values;increasing or decreasing an assignment value by +/−1 based on adjacent bit similarity; anditeratively adjusting assigned values until an optimal bit error rate is obtained to produce final LLR numbers.