초록 ▼

Disclosed is a heat exchange conduit formed between pre-fabricated building panels and a daylighting section integral within pre-fabricated, structural panels. The daylighting section has the capability to take ceiling air (or air below free-standing arrays) and either return it to the building duri

Disclosed is a heat exchange conduit formed between pre-fabricated building panels and a daylighting section integral within pre-fabricated, structural panels. The daylighting section has the capability to take ceiling air (or air below free-standing arrays) and either return it to the building during heating months, reject the heat, or shunt it for other uses after being warmed through a dual pane glazing assembly with infrared rejection. During summer days, this allows for dramatic reduction in building cooling demand. Heat exchange surfaces within the conduit are thermally tied to the exterior components of the panels to allow heating by solar insolation or cooling to night sky or air. An advanced insulation system adds to thermal performance and sealed insulation cavities prevent moisture degradation of R-Values. Passage through the heat exchange conduit allows for active whole roof solar collection in spring/fall and night cooling capability during summer night operation.

대표청구항 ▼

1. A solar, daylighting and night cooling system comprising: an array of elongated panels with each panel having a daylighting section at one or more places along its length, a continuous thermal plane of component materials at an upper side of said panels, except in the areas of said daylighting se

1. A solar, daylighting and night cooling system comprising: an array of elongated panels with each panel having a daylighting section at one or more places along its length, a continuous thermal plane of component materials at an upper side of said panels, except in the areas of said daylighting sections, a structural plane of component materials at a lower side of said panels and a group of insulating, fire retardant, and structural materials between said thermal plane and said structural plane,said thermal plane and said daylighting sections oriented to receive solar diffuse or beam insolation during the day and emit long wave radiation to the sky at night,with said panels joined edge to edge along their lengths to form said array with thermal conduit assembly means, said conduit assembly means in physical and thermal contact with said thermal plane and enclosing air passage channels,said air passage channels communicating with said daylighting sections and with a set of plenum means for directing an air flow in a building mounted array to either outside a building envelope, inside said building envelope or stopping said air flow from moving toward said plenum means,each of said conduit assembly means including a weatherstrip assembly at its upper side, angled elements of said conduit assembly means at corners thereof, a thermally insulating material at its lower side and said fire retardant and structural materials of said group at lateral sides of said conduit assembly means,with each said daylighting section having a central compartment with a transparent exterior glazing at said upper side of said panels and an interior pane with infrared light rejection and visible light transmission properties located roughly parallel to and spaced apart from said exterior glazing, said interior pane located in close proximity to the lower side of said panels,said daylighting section additionally having adjacent to said central compartment a first compartment with an open bottom communicating with an area below said array, said first compartment sealed at a top by said component materials of said thermal plane, anda second compartment adjacent to said central compartment having at least one blower connecting it to said central compartment on one side and a plurality of holes connecting said second compartment to said air passage channel at the other side,said second compartment housing a drying agent cartridge and having at least one actuated, nominally closed movable gate located at a bottom of said second compartment, said movable gate in an actuated position communicating with said area below said array,said second compartment having a separating wall between said central compartment on one side and a structural, insulating wall between it and said air passage channel on the other, said separating wall having said at least one blower mounted thereon,said solar and night cooling system additionally including control system means for:starting and stopping said blowers to selectively draw said air flow from below said daylighting section,operating in a Summer Day mode with said air flow being heated above said interior pane by said solar insolation passing through said exterior glazing and expelling said air flow from said plenum means to the outside of said building envelope,operating in a Fire mode having the same actions as said Summer Day mode,operating in a Winter Day mode with said air flow being heated above said interior pane by said solar insolation passing through said exterior glazing and returning said air flow to below said panels by means of said at least one gate,operating in a Summer Night mode with said air flow passing into said conduit assembly, said air flow being cooled by means of said thermal plane and returning said air flow to the inside of said building envelope,operating in other modes configured for energy sourcing and conservation in said building mounted array. 2. The solar, daylighting and night cooling system of claim 1, wherein: said central compartment is bounded by bulkheads at both ends, with at least one of said bulkheads carrying a module containing battery storage, controls electronics and power supplies, anda surface of said module facing away from said at least one bulkhead has a photovoltaic strip mounted on it which is electrically connected to said controls electronics and battery storage within said module,with said module having additional connections to said at least one blower, control connections to said actuated moveable gate and optionally having an additional power supply connection to a lighting strip optionally mounted within said first compartment. 3. The solar, daylighting and night cooling system of claim 1, wherein: said interior pane is a double unit with two spaced apart lites separated by an insulating thermal gap and sealed around the perimeter or said unit, andsaid interior pane is mounted in a rectangular carrier frame having a hinged end and latch means at the other end for securing said pane at the bottom of said central compartment. 4. The solar, daylighting and night cooling system of claim 1, wherein: said interior pane is a single unit with one infrared rejecting lite, andsaid interior pane is mounted in a rectangular carrier frame having a hinged end and latch means at the other end for securing said pane at the bottom of said central compartment. 5. The solar, daylighting and night cooling system of claim 1, wherein said plenum means for directing an air flow in the case of a building mounted array comprises: a plenum shaped to receive said air flows from said air passage channels, said plenum having: an interior surface for containing said air flows, a louver or louver setting for stopping said air flow from leaving said plenum, a louver or louver setting for directing said air flow to the outside of said building and a louver or louver setting for directing said air flow to the inside of said building,optionally said plenum can also house a finned tube heat exchanger inside said interior surface connected to a thermal storage tank. 6. The solar, daylighting and night cooling system of claim 1, wherein: said drying agent cartridge contains a packed bed of drying agent material, with said drying agent material having the characteristic of releasing moisture to a flow of hot air and the characteristic of absorbing moisture from a flow of cooler air. 7. The solar, daylighting and night cooling system of claim 1, wherein: said thermal plane comprises exterior metal flange portions of two structural side rails at the edges of said panels, metal cross braces anchored to interior channels of said flange portions connecting said structural side rails to one another, andan exterior metal skin layer bonded to top flanges of said flange portions, said skin layer spanning the width of said panels and optionally having an exterior surface coating with high emissivity properties applied to said skin layer at the tipper side of said panels, withsaid structural plane comprising interior metal flange portions of said structural side rails at the edges of said panels, metal cross braces anchored to interior channels of said interior flange portions connecting said structural side rails to one another, andan interior skin layer bonded to the bottom surfaces of said interior flange portions that spans the width of said panels and has an interior decorative surface coating with good visible light reflectance. 8. The solar, daylighting and night cooling system of claim 7, wherein said group comprises: compressed fiberglass insulation batting between said exterior and interior metal skin layers, in locations other than said daylighting sections,both of said structural side rails having a fire retardant, thermally insulating composite web portion between said exterior and said interior flange portions, andfire retardant, thermally insulating composite bulkhead assemblies located at two sides of each said daylighting section and at the ends of each of said panels. 9. The solar, daylighting and night cooling system of claim 7, wherein: said exterior metal skin layer extends to the perimeter of said exterior glazing and is bonded to flange components around said exterior glazing, withsaid exterior glazing having a transparent film secured to a rigid body portion at the upper surface, said transparent film larger in width and length than the dimensions of said body portion,with said transparent film bonded in a band around its perimeter to said optional exterior surface coating of said exterior skin forming a weather proof joint between said daylighting section and said exterior metal skin. 10. The solar, daylighting and night cooling system of claim 9, wherein: said body portion of said exterior glazing has a roughly rectangular shape with an edge feature of a rounded projection extending beyond two adjacent ledge portions,with the material of one said ledge portion bonded to said transparent film and an interior face of the other said ledge portion directed toward said central compartment, said interior face optionally having textured, light diffusing contours on it, andsaid rounded projection engaging said flange components around said exterior glazing and locked in place forming a secondary seal using plastic clips that are wedged between angle portions of said flange components and the lower surface of said rounded projection. 11. The solar, daylighting and night cooling system of claim 10, wherein: the material composition and thickness of said rounded projection allow it to be frangible under high differential pressures that might occur in severe storms,whereby, rapid release of pressure from within said building can significantly reduce uplift forces on said building mounted array. 12. The solar, daylighting and night cooling system of claim 7, wherein said weatherstrip assembly comprises: an metal top plate secured in dovetail shaped channels of said exterior flange portions using metal clips located between the lower surface of said top plate and angle portions of said dovetail shaped channels,periodically spaced metal brackets that are fastened to said top plate and limit displacement of said clips from their positions,an elastomeric weatherstrip seal bonded to the upper, outside surface of said top plate, said weatherstrip seal having a flap portion at one side which overlaps one of said flanges to form a secondary seal and a width wise flat portion which is compressed between bulb portions of said top flanges and said metal top plate to form two primary seal lines at the edges of said weatherstrip assembly. 13. The solar, daylighting and night cooling system of claim 12, wherein: said elements of said thermal plane include back sections of said dovetail shaped channels perpendicular to said top flanges,said back sections joining said top flanges with internal radii and continuing into said angle portions, said angle portions forming the upper corners of said thermal conduit assembly means, withsaid metal top plate having bulb portions congruent to and in close contact with said interior radii of said dovetail shaped channels,whereby, the additional cross sectional area provided by said internal radii, said close contact with said interior radii and said clips secured at said lower surface of said top plate create a path of least resistance for heat flows arising from said thermal plane to reach said thermal conduit assembly means. 14. The solar, daylighting and night cooling system of claim 13, wherein said thermal conduit assembly means further include: thermal caulk applied between said top plate and said angle portions of said dovetail shaped channels.