초록 ▼

A process for converting carbonaceous materials or light hydrocarbon gases into products comprising predominately C5+ hydrocarbons. The process converts the feedstock into synthesis gas comprising hydrogen and carbon monoxide and then uses the Fischer-Tropsch reaction to produce heavy hydrocarbons.

A process for converting carbonaceous materials or light hydrocarbon gases into products comprising predominately C5+ hydrocarbons. The process converts the feedstock into synthesis gas comprising hydrogen and carbon monoxide and then uses the Fischer-Tropsch reaction to produce heavy hydrocarbons. A small excess of hydrogen is produced in the syngas generator or by water gas shift for use in product upgrading and for blending with Fischer-Tropsch tail gas for recycle back to syngas generation. A portion of the Fischer-Tropsch tail gas is used as fuel, thus purging combustible light gases and CO2 from the tail gas. Hydrogen rich purge gas is blended into the remaining tail gas resulting in a recycle stream that is returned to the syngas generator. The tail gas components are therefore efficiently used to produce more products.

대표청구항 ▼

1. A process to convert carbonaceous materials and/or light hydrocarbon gases or combinations thereof into heavy hydrocarbon products, which process comprises: a) converting carbonaceous materials and/or light hydrocarbon gases to synthesis gas with a H2:CO ratio greater than 2.0;b) separating a par

1. A process to convert carbonaceous materials and/or light hydrocarbon gases or combinations thereof into heavy hydrocarbon products, which process comprises: a) converting carbonaceous materials and/or light hydrocarbon gases to synthesis gas with a H2:CO ratio greater than 2.0;b) separating a part of the hydrogen from the synthesis gas of step (a);c) passing all or a portion of the synthesis gas after hydrogen separation over a cobalt based Fischer-Tropsch catalyst in a Fischer-Tropsch reactor operating at or below the stoichiometric H2:CO ratio, resulting in the production of heavy hydrocarbon products, water and a tail gas comprising mainly light hydrocarbon gases, unreacted syngas, and CO2;d) using a portion of the H2 of step (b) for hydroprocessing the Fischer-Tropsch hydrocarbon products;e) using a portion of the Fischer-Tropsch tail gas as fuel, thus purging CO2 from the tail gas; andf) mixing all or a part of any remaining H2 from step (b) not used for hydroprocessing with all or a part of any remaining Fischer-Tropsch tail gas not used as fuel and recycling this mixed gas stream to step (a). 2. The process of claim 1 wherein if the Fischer-Tropsch section has two or more stages, an additional amount of hydrogen may be added between Fischer-Tropsch stages to provide additional H2:CO ratio control while maintaining the target H2:CO ratio in the tail gas. 3. The process of claim 1 step (a) wherein the syngas is generated is with any type of reforming or gasification reactor such as a coal or biomass gasifier, an autothermal reformer with or without a prereformer or a combination of partial oxidation and steam methane reforming or combinations thereof. 4. The process of claim 1 step (b) wherein the step of separating a part of the hydrogen includes purifying the hydrogen. 5. The process of claim 1 wherein the hydrogen separation of step (b) is done with one or more stages of a hydrogen permeable membrane or with pressure swing adsorption or combinations thereof. 6. The process of claim 1 wherein the water produced in step (c) can be stripped with all or a portion of the fuel gas in step (e) and/or steam to remove soluble organic components which are utilized as fuel for process heaters. 7. The process of claim 6 wherein the stripped water can be further treated for use with conventional water treating processes or combinations thereof. 8. The process of claim 7 wherein conventional treating processes include biological treatment, UV light and ozone, or treatment with oxidation chemicals such as peroxide or trace organic removal over adsorbents such as activated carbon or zeolites or combinations thereof. 9. The process of claim 1 wherein, if the Fischer-Tropsch section has two or more stages, the tail gas from the last stage may be directly recycled to the inlet of the first stage or subsequent stages. 10. A process to convert carbonaceous materials and/or light hydrocarbon gases or combinations thereof into heavy hydrocarbon products which process comprises: a) converting carbonaceous materials and/or light hydrocarbon gases to synthesis gas with a H2:CO ratio less than 2.0;b) shifting a portion of the synthesis gas of step (a) over a water gas shift (“WGS”) catalyst and optionally purifying all or a portion of the hydrogen produced by WGS;c) passing all or a portion of the synthesis gas not subjected to WGS over a cobalt based Fischer-Tropsch catalyst in a Fischer-Tropsch reactor operating at or below the stoichiometric H2:CO ratio, resulting in the production of heavy hydrocarbon products, water and a tail gas comprising mainly light hydrocarbon gases, unreacted syngas, and CO2;d) if needed, using a portion of the H2 of step (b) to reach the targeted H2:CO ratio at the inlet of the Fischer-Tropsch reactor;e) using another portion of the H2 of step (b) for hydroprocessing the Fischer-Tropsch hydrocarbon products;f) using a portion of the Fischer-Tropsch tail gas as fuel, thus purging CO2 from the tail gas; andg) mixing all or a part of any remaining H2 from step (b) not used for ratio adjustment in step (d) or hydroprocessing in step (e) with all or a part of any remaining Fischer-Tropsch tail gas not used as fuel and recycling this mixed gas stream to step (a). 11. The process of claim 10 wherein at least a portion of water fed to the water gas shift reactor is Fischer-Tropsch water from step (c) that has been concentrated to contain most of the water soluble organic components such as alcohols and acids produced by the Fischer-Tropsch reaction. 12. The process of claim 10 step (b) wherein the hydrogen separation is done with one or more stages of a hydrogen permeable membrane or with pressure swing adsorption or combinations thereof. 13. The process of claim 10 wherein the water produced in step (c) can be stripped with all or a portion of the fuel gas in step (e) and/or steam to remove soluble organic components which are utilized as fuel for process heaters. 14. The process of claim 13 wherein the stripped water can be further treated for use with conventional water treating processes or combinations thereof. 15. The process of claim 14 wherein conventional treating processes include biological treatment, UV light and ozone, or treatment with oxidation chemicals such as peroxide or trace organic removal over adsorbents such as activated carbon or zeolites or combinations thereof. 16. The process of claim 10 wherein, if the Fischer-Tropsch section has two or more stages, the tail gas from the last stage may be directly recycled to the inlet of the first stage or subsequent stages.