초록 ▼

An engine having two or more fuel injectors is disclosed, where at least one of the injectors is used to port fuel inject fuel into the cylinder when the air intake valve is open. The open valve port fuel injector is used to inject a fuel that has alcohol as a constituent and is the same fuel inject

An engine having two or more fuel injectors is disclosed, where at least one of the injectors is used to port fuel inject fuel into the cylinder when the air intake valve is open. The open valve port fuel injector is used to inject a fuel that has alcohol as a constituent and is the same fuel injected by another fuel injector. In other embodiments, the open valve fuel injector is used to inject an anti-knock fuel containing alcohol while a primary fuel, is introduced by another injector. The operation of the open valve fuel injector can be optimized to maximize the vaporization cooling. In other embodiments, the open valve fuel injector may be used in conjunction with direct injection of the primary fuel or the anti-knock fuel. Heavy EGR can be optimally used with the various embodiments.

대표청구항 ▼

1. A spark ignition engine where fuel is directly injected as a liquid and EGR is used; and where fuel is also port fuel injected; andwhere the ratio of directly injected fuel to port injected fuel increases with increasing torque; andwhere the port injected fuel is employed in such a way that the a

1. A spark ignition engine where fuel is directly injected as a liquid and EGR is used; and where fuel is also port fuel injected; andwhere the ratio of directly injected fuel to port injected fuel increases with increasing torque; andwhere the port injected fuel is employed in such a way that the amount of EGR that can be used without encountering a combustion stability limit is increased relative to the amount of EGR that could be used if port fuel injection were not employed. 2. The spark ignition engine of claim 1 where EGR is used at low loads and the amount of EGR that can be used at low loads without encountering a combustion stability limit is increased. 3. The spark ignition engine of claim 1 where the EGR level is at least 30%. 4. The spark ignition engine of claim 1 where the port fuel injection is employed in such a way that particulate emissions are lower than would be the case if port fuel injection were not used. 5. The spark ignition engine of claim 1 where the engine is turbocharged and where the port fuel injection is employed in such a way that particulate emissions are lower than would be the case if port fuel injection were not used. 6. The spark ignition engine of claim 1 where a fast combustion engine is used. 7. The spark ignition engine of claim 1 where the fuel includes alcohol. 8. The spark ignition engine of claim 1 where a misfire detector is used to control the amount of EGR. 9. The spark ignition engine of claim 1 where hot EGR, which is EGR that is not cooled by a heat exchanger, is used at low loads. 10. The spark ignition engine of claim 1 where hot EGR, which is EGR that is not cooled by a heat exchanger, is used at low load and the amount of EGR is reduced or eliminated at high load. 11. The spark ignition engine of claim 1 where hot EGR, which is EGR that is not cooled by a heat exchanger, is used at low load and the amount of EGR is reduced or eliminated at high load so as to avoid the adverse effect of knock. 12. The spark ignition engine of claim 1 where gasoline is introduced into the engine by direct injection and port injection. 13. The spark ignition engine of claim 1 where, as torque is increased, the ratio of directly injected fuel to port injected fuel is increased so as to prevent knock. 14. The spark ignition engine of claim 1 where the port fuel injection is employed in such a way so as to increase efficiency relative to what it would be if the engine was only fueled by a direct injection fueling system. 15. A spark ignition engine where fuel is directly injected as a liquid and EGR is used; and where fuel is also port fuel injected; andwhere the ratio of directly injected fuel to port injected fuel increases with increasing torque; andwhere port injected fuel is employed in such a way that the amount of EGR that can be used without encountering a combustion stability limit is increased relative to the amount of EGR that could be used if port fuel injection were not employed; andwhere the EGR is cooled. 16. The spark ignition engine of claim 15 where EGR is used at low loads and the amount of EGR that can be used at low loads without encountering a combustion stability limit is increased. 17. The spark ignition engine of claim 15 where the EGR level is at least 30%. 18. The spark ignition engine of claim 15 where the port fuel injection is employed in such a way that particulate emissions are lower than would be the case if port fuel injection were not used. 19. The spark ignition engine of claim 15 where the engine is turbocharged and where the port fuel injection is employed in such a way that particulate emissions are lower than would be the case if port fuel injection were not used. 20. The spark ignition engine of claim 15 where a fast combustion engine is used. 21. The spark ignition engine of claim 15 where the compression ratio is at least 14. 22. The spark ignition engine of claim 15 where the amount of EGR is controlled by closed loop control using a misfire detector. 23. The spark ignition engine of claim 15 where a fast combustion engine is used. 24. The spark ignition engine of claim 15 where the fuel includes alcohol. 25. The spark ignition engine of claim 15 where the amount of EGR is controlled by open loop control so as to prevent misfire. 26. The spark ignition engine of claim 15 where the engine is fueled with directly injected and port injected gasoline.