초록 ▼

Potable drinking water is a scarce resource in many parts of developing countries, especially rural areas. Due to limited financial means of these countries, low cost point-of-use systems are thought to be appropriate technology to treat water. Systems using solar ultraviolet (UV) radiation could be

Potable drinking water is a scarce resource in many parts of developing countries, especially rural areas. Due to limited financial means of these countries, low cost point-of-use systems are thought to be appropriate technology to treat water. Systems using solar ultraviolet (UV) radiation could be successful since many vulnerable countries are located where solar radiation is intense and abundant throughout the year. The goal of this disclosure is to develop a simple and low cost point-of-use solar UV reactor to disinfect water. In this disclosure wavelength-dependent microbial dose-response behavior was investigated using surrogates to pathogenic microbes. A solar radiation prediction method based on the SMARTS model was used to predict solar UV intensity as function of geographic location and time. A numerical modeling procedure using the discrete ordinate (DO) model and CFD software (FLUENT) was used to simulate UV dose (distribution) delivery to microorganisms. Then, the dose distribution was combined with the dose response behavior using a segregated flow model to predict microbial inactivation by the reactor. A prototype was produced and tested to validate the numerical modeling procedure. The inactivation results from the prototype were in agreement with numerical inactivation prediction. The modeling procedure permits parameters such as reactor dimensions and material properties to be varied to meet a treatment goal.

대표청구항 ▼

1. A solar disinfection reactor comprising: a compound parabolic collector, wherein the collector includes an ultraviolet B (UVB) reflective coating, the UVB reflective coating is a metallized plastic film;a UVB transmissive receiver pipe supported in the focal area of the compound parabolic collect

1. A solar disinfection reactor comprising: a compound parabolic collector, wherein the collector includes an ultraviolet B (UVB) reflective coating, the UVB reflective coating is a metallized plastic film;a UVB transmissive receiver pipe supported in the focal area of the compound parabolic collector, wherein the UVB transmissive receiver pipe is at least 50% transmissive, and wherein the UVB transmissive receiver pipe is quartz, polystyrene, or fluoroethylenepropylene;at least one water storage container fluidly coupled to the UVB transmissive receiver pipe;a fluid flow system for delivering water under a constant flow rate from the at least one water storage container through the UVB transmissive receiver pipe; andwherein the collector is configured to collect solar UVB radiation and utilize the radiation to disinfect water. 2. The reactor of claim 1 wherein the UVB transmissive receiver pipe is configured to transmit solar UVB radiation. 3. The reactor of claim 1 wherein the UVB transmissive receiver pipe is made from UV radiation transparent material. 4. The reactor of claim 1 further comprising plastic tubing fluidly coupling the at least one water storage container to the UVB transmissive receiver pipe. 5. The reactor of claim 1 wherein the at least one water storage container includes an influent water storage container for holding influent water and an effluent water storage container for holding effluent water. 6. The reactor of claim 5, wherein the influent water storage container is made of glass covered with reflective material. 7. The reactor of claim 5, wherein each of the influent and effluent water storage containers are made of plastic. 8. The reactor of claim 7, wherein each of the influent and effluent water storage containers is made of high density polyethylene. 9. The reactor of claim 1, wherein the fluid flow system is a peristaltic pump. 10. The reactor of claim 1, wherein the fluid flow system is nonelectric.