초록 ▼

Additional approaches for the reduction of particulate emissions in gasoline engines using optimized port+direct injection are described. These embodiments include control of the amount of directly injected fuel so as to avoid a threshold increase in particulates due to piston wetting and reduction

Additional approaches for the reduction of particulate emissions in gasoline engines using optimized port+direct injection are described. These embodiments include control of the amount of directly injected fuel so as to avoid a threshold increase in particulates due to piston wetting and reduction of cold start emissions by use of air preheating using variable valve timing.

대표청구항 ▼

1. A fuel management system for a spark ignition engine where fuel is introduced into at least one cylinder by direct injection and where port fuel injection is also used for fueling the at least one cylinder; and where the port fuel injection fueling is adjusted so as to reduce particulate emission

1. A fuel management system for a spark ignition engine where fuel is introduced into at least one cylinder by direct injection and where port fuel injection is also used for fueling the at least one cylinder; and where the port fuel injection fueling is adjusted so as to reduce particulate emissions by reducing the amount of direct injection that would otherwise occur before a first crank angle which occurs during the intake stroke and after a second crank angle which occurs during the compression stroke;and where as torque increases, the fraction of fuel that is directly injected is increased so that it prevents knock. 2. The fuel management system of claim 1 where the fraction of fuel that is provided by direct injection is matched to that needed to prevent knock. 3. The fuel management system of claim 1 where spark retard is used so as to decrease the amount of directly injected fuel that would otherwise be injected before the first crank angle or after the second crank angle. 4. The fuel management system of claim 1 where an increase in direct injector pressure is used to decrease the amount of directly injected fuel that is injected before the first crank angle and after the second crank angle. 5. The fuel management system of claim 1 where engine efficiency is greater than it would be if the engine were fueled by direct injection alone. 6. A fuel management system for a spark ignition engine where fueling occurs by direct injection and by port injection; and where particulates generated by direct injection are reduced by use of port fuel injection to reduce the fraction of fuel that would otherwise be provided by direct injection as torque is increased;and where the particulates generated by direct injection are also reduced by the use of the port fuel injection so as to keep the amount of the direct injected fuel below a selected level as torque increases. 7. The fuel management system of claim 6 where the start of direct injection timing is such that it occurs after a first crank angle which occurs during the intake stroke and before a second crank angle which occurs during on the compression stroke. 8. The fuel management system of claim 7 where port fuel injection is adjusted so that the time period for direct injection is kept within the time period between the first crank angle and the second crank angle as torque increases. 9. The fuel management system of claim 7 where port fuel injection is adjusted so that the time period for direct injection is kept within the time period between the first crank angle and the second crank angle and where the start of direct injection is such as to maximize mixing. 10. The fuel management system of claim 7 where port fuel injection is adjusted so that the time period for direct injection is kept within the time period between the first crank angle and the second crank angle and where the start of direct injection is such as to provide late injection. 11. The fuel management system of claim 6 where the start of direct injection is adjusted so as to minimize the direct injection generated particulate reduction. 12. The fuel management system of claim 6 where, as BMEP increases, the fraction of fuel provided by direct injection is matched to that needed to prevent knock. 13. The fuel management system of claim 6 where engine efficiency is greater than it would be if the engine were fueled with direct injection alone. 14. A fuel management system for spark ignition engine which has both a port fuel injection system and a direct fuel injection system; and where there is a first cold start period wherein the average fraction of fuel provided by direct injection is less than the average amount of fuel provided by direct injection during the rest of the engine operation period;and wherein during at least part of the first cold start period, the fraction of fuel that is provided by direct injection is matched to that needed to prevent knock as engine torque and speed vary;and where spark retard is used to reduce or eliminate the fraction of fuel that would otherwise be provided by direct injection;and where spark retard reduces direct injection generated particulate emissions by decreasing the fraction of fuel that is provided by direct injection;and where the first cold start period is longer than a second cold start period which is a cold start period for catalyst warmup. 15. The fuel management system of claim 14 where only port fuel injection alone is used during the first cold start period and the absence of direct injection is enabled by spark retard. 16. The fuel management system of claim 14 where spark retard reduces direct injection generated particulate emissions by reducing the time period for direct injection. 17. The fuel management system of claim 14 where variable valve timing is used to enable operation with no use of direct injection. 18. The fuel management system of claim 14 where the first cold start period is 100 seconds. 19. The fuel management system of claim 14 where open-valve port fuel injection is used. 20. The fuel management system of claim 14 where spark retard is increased to provide the largest decrease in the fraction of fuel that is provided by direct injection, including elimination of direct injection, without the occurrence of misfire. 21. The fuel management system of claim 14 where the first cold start period is determined by a look up table. 22. The fuel management system of claim 14 where the first cold start period is determined by engine temperature. 23. A fuel management system for a spark ignition engine where the spark ignition engine is fueled by direct injection and port fuel injection and where the start of the direct injection and/or the duration of the direct injection are adjusted so as to reduce the amount of direct injected fuel that is introduced into the engine before a first crank angle during the intake stroke and after a second crank angle during the compression stroke; where the engine is fueled with gasoline, andwhere the use of port fuel injection decreases the time that direct injection occurs before the first crank angle and after the second crank angle. 24. The fuel management system of claim 23 where as engine speed increases the value of brake mean pressure above which there is a large increase in direct injection generated particulate emissions decreases. 25. The fuel management system of claim 23 where the amount of direct injection that occurs before the first crank angle and after the second crank angle decreases with increasing direct injection pressure. 26. The fuel management system of claim 23 where the fraction of fuel that is provided by direct injection is matched to the fraction needed to prevent knock as torque is increased. 27. The fuel management system of claim 23 where spark retard is used to decrease the amount of directly injected fuel that is introduced into the engine before the first crank angle and after the second crank angle.