근적외선 분광법을 이용한 폐플라스틱 분리선별기술개발 A Technical Development of Waste Plastics Separation and Selection by Near-Infrared Spectra Method원문보기
보고서 정보
주관연구기관
기술표준원 Korea Agency for Technology and Standards
보고서유형
최종보고서
발행국가
대한민국
언어
한국어
발행년월
2006-04
과제시작연도
2002
주관부처
과학기술부 Ministry of Science and Technology
등록번호
TRKO201000012577
과제고유번호
1350007971
사업명
21C 프론티어연구개발사업
DB 구축일자
2013-04-18
키워드
플라스틱 선별.근적외선.색상선별.비젼방식.CCDPlastic sorting.NIR.Color sorting.Vision.CCD
초록▼
폐플라스틱 중 6대 범용 플라스틱(PE, PET, PP, PS, PVC, ABS)을 비접촉식의 근적외선 분광분석법을 이용하여 10,000ton/년 규모의 폐플라스틱 재질별 분리?선별 양산화 시스템 개발. - 전처리시스템 개발 □회전분리기(크기선별 및 이물질 제거) 개발(wire mesh법) □유리분리기 개발 - 벨트 폭 1,000mm의 conveyor belt 제작 - 근적외선 분광판별기 판별속도 및 정확성 제고 □6대범용 플라스틱의 판별능력 95% 이상 □scan speed : 0.1초 이내,
폐플라스틱 중 6대 범용 플라스틱(PE, PET, PP, PS, PVC, ABS)을 비접촉식의 근적외선 분광분석법을 이용하여 10,000ton/년 규모의 폐플라스틱 재질별 분리?선별 양산화 시스템 개발. - 전처리시스템 개발 □회전분리기(크기선별 및 이물질 제거) 개발(wire mesh법) □유리분리기 개발 - 벨트 폭 1,000mm의 conveyor belt 제작 - 근적외선 분광판별기 판별속도 및 정확성 제고 □6대범용 플라스틱의 판별능력 95% 이상 □scan speed : 0.1초 이내, 3.5ton/hr 이상의 처리용량 - 선별율 : 90% 이상 제고 - PET병 색상별 선선 시스템 개발 . Scan Speed : 100ms 이내 . 선별 가능한 색상 : 투명, 갈색, 녹색, 청색, 적색 등 . 적용 기술 : CCD 카메라를 이용한 Vision 방식 적용 - 전처리 시스템 scale up(회전분리기, 유리분리기) - 양산시스템 제작(10,000ton/년) - 양산시스템의 현장 적용 (경상남도 밀양시: 일일 처리량: 10톤, 선별 품목: PET, PE, PP, PS, 색상별 유리병) 경기도 용인시: 일일 처리량 : 60톤, 선별 품목 : PET, PE, PP, PS)
Abstract▼
Since waste plastic could not be decomposed, it is difficult to recycle and pollute the environment. There are three types of waste plastics recycling methods, which are material recycle, chemical recycle, and thermal recycle. A separation has to be preceded for doing them effectively. Sorting of
Since waste plastic could not be decomposed, it is difficult to recycle and pollute the environment. There are three types of waste plastics recycling methods, which are material recycle, chemical recycle, and thermal recycle. A separation has to be preceded for doing them effectively. Sorting of waste plastics is a fundamental part of plastic recycling because of many different types of plastics being in general use and the fact that most of these are not compatible each other. So waste plastics generally have low value and cause producing poor quality products with variable properties. Therefore, Sorting of waste plastics should be preceded. At present Sorting of waste plastics is sorted by hand mainly. Manual sorting of waste plastics is labour intensive as well as could lead to unwanted contamination. Identification and automated sorting systems have increasingly been using to improve the speed and accuracy of sorting plastic wastes. Several methods are currently available for the identification of waste plastics to facilitate separation. NIR(Near Infra Red) spectroscopy is one of the most widely used analysis techniques to identify different types of plastics. NIR spectroscopy offers many advantages for sorting waste plastics. It enables rapid reliable identification(within 2 milliseconds) and is sufficiently robust to operate in dirty and vibration-prone industrial environments which are typical of sorting facilities.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.