보고서 정보
주관연구기관 |
한국건설기술연구원 Korea Institute Of Construction Technology |
연구책임자 |
조삼덕
|
참여연구자 |
이대영
,
김진환
,
한상기
,
오세용
,
유인균
,
권수안
,
홍재청
,
유형목
,
이수형
,
이상국
,
이태훈
,
양성철
,
김광우
|
보고서유형 | 최종보고서 |
발행국가 | 대한민국 |
언어 |
한국어
|
발행년월 | 2003-09 |
과제시작연도 |
2002 |
주관부처 |
건설교통부 |
사업 관리 기관 |
한국건설교통기술평가원 Korea Insitute of Construction & Transportation Technology Evaluation and Planning |
등록번호 |
TRKO201000019201 |
과제고유번호 |
1500000583 |
사업명 |
건설기반기술혁신 |
DB 구축일자 |
2013-04-18
|
초록
▼
본 연구는 토목섬유 아스팔트 포장시스템을 체계적으로 정립하기 위한 연구로서, 실내시험, 수치해석, 현장시험시공 및 추적조사, 시공.유지관리 지침(안) 작성, 설계 방법론 제시 등을 각각 단계별로 나누어 연차별로 수행하였다.
1차년도에는 실내 피로시험과 휠트래킹시험 및 유한요소해석 등을 수행하여 토목섬유 아스팔트 복합체의 거동특성을 분석하고, 토목섬유의 설치위치와 강성에 따른 보강효과를 평가하며, 이를 토대로 토목섬유의 보강 메커니즘을 규명하였다.
2차년도에는 국내에서 많이 사용하고 2 있는 아스팔트 및 골재 종류를
본 연구는 토목섬유 아스팔트 포장시스템을 체계적으로 정립하기 위한 연구로서, 실내시험, 수치해석, 현장시험시공 및 추적조사, 시공.유지관리 지침(안) 작성, 설계 방법론 제시 등을 각각 단계별로 나누어 연차별로 수행하였다.
1차년도에는 실내 피로시험과 휠트래킹시험 및 유한요소해석 등을 수행하여 토목섬유 아스팔트 복합체의 거동특성을 분석하고, 토목섬유의 설치위치와 강성에 따른 보강효과를 평가하며, 이를 토대로 토목섬유의 보강 메커니즘을 규명하였다.
2차년도에는 국내에서 많이 사용하고 2 있는 아스팔트 및 골재 종류를 대상으로 다양한 실내 보균열시험(beam bending test) 및 실내 피로시험, 휠트래킹 시험을 추가로 수행하여 최적 토목섬유 아스팔트 복합체를 도출하며, 경제성과 환경영향 검토, 현장시험시공에 대비한 시공요소기술을 검토하고 시험시공계획을 수립하였다.
3차년도에는 1, 2차년도의 실내실험 결과를 토대로 도출된 최적 단면에 대한 추가 실험을 수행하여 그 효과를 검증하고, 신설 및 덧씌우기 토목섬유 아스팔트 포장에 대한 현장조사 및 노면평가 등을 수행하며, 토목섬유의 부착성 평가시험을 수행하고, 포장의 공용성을 평가하는 방안을 분석하였다.
4차년도에는 신설 및 덧씌우기 토목섬유 아스팔트 포장에 대한 현장시험시공을 통한 시공성 평가를 수행하고, 반사균열 저항성 실험, 시험시공 포장에 대한 추적조사를 수행하여 단기 공용성을 평가하며, 토목섬유 아스팔트 포장에 대한 시공.유지관리 지침(안) 및 설계 방법론을 제시하였다.
Abstract
▼
The purpose of this study was to determine a possible use of geosynthetics (glass fiber grid and glass fiber sheet) within asphaltic layer on asphalt pavement. For the study, the followings were carried out step by step with a four- year plan; laboratory test, numerical analysis, construction and mo
The purpose of this study was to determine a possible use of geosynthetics (glass fiber grid and glass fiber sheet) within asphaltic layer on asphalt pavement. For the study, the followings were carried out step by step with a four- year plan; laboratory test, numerical analysis, construction and monitoring of test pavement, and preparation of design·construction·maintenance guide
In the first year, laboratory fatigue tests, laboratory wheel tracking tests, and numerical analyses were performed in order to analyze the performance characteristics of a geosynthetics-asphalt mixture and to evaluate the effectiveness of the reinforcement by geosynthetics with various installing positions and stiffness. On the basis of these studies, the mechanism of the reinforcement by geosynthetics was clarified.
In the second year, various laboratory beam bending tests, laboratory fatigue tests, and laboratory wheel tracking test were planned to be conducted for asphalt and aggregates which are widely used in the country. Based on the results of these tests, the optimum geosynthetics-asphalt mixture was developed. And for the mixture, serviceability, economic efficiency, environmental impact was assessed. Then detailed construction techniques were planned to be examined throughout a test construction.
In the third year, the optimized geosynthetics-reinforced pavement section that has developed in the second year was validated throughout further detailed laboratory experiments. A reduced-scale construction was completed to access adhesion between geosynthetics and asphalt pavement. Also a performance monitoring scheme was established for the test construction site.
In the fourth year, a test construction was completed for new and overlay site. A construction technique for a geosynthetics-reinforced pavement was evaluated throughout the test construction. A short-term pavement performance was evaluated for the site, and a mid- to long-term pavement performance monitoring plan was established. Finally a guideline was developed for the design·construction ·maintenance of a geosynthetics-asphalt pavement .
목차 Contents
- 표지 ...1
- 제출문 ...2
- 요약문 ...4
- Summary ...8
- 목차 ...13
- CONTENTS ...15
- 표목차 ...17
- 그림목차 ...21
- 제1장 서론 ...31
- 제1절 연구개발의 목적 및 필요성 ...31
- 제2절 연구개발의 내용 및 범위 ...32
- 제2장 국내외 기술개발 현황 ...35
- 제1절 아스팔트 포장 표층보강용 토목섬유 ...35
- 제2절 토목섬유 보강 아스팔트 포장시스템 ...40
- 제3장 연구개발 수행내용 및 결과 ...46
- 제1절 토목섬유 보강 메커니즘 분석 ...46
- 1. 토목섬유의 균열억제 메커니즘 ...46
- 2. 토목섬유의 소성변형억제 메커니즘 ...54
- 제2절 실내실험 프로그램 ...59
- 1. 사용재료 ...59
- 2. 실험 포장단면 및 공시체 제작 ...79
- 3. 시험 종류 및 방법 ...89
- 제3절 토목섬유 아스팔트 포장의 균열 유한요소해석 ...104
- 1. 아스팔트 포장체의 균열성장 해석 ...104
- 2. 유한요소해석 및 결과 ...116
- 제4절 토목섬유 아스팔트 복합체의 거동 특성 ...151
- 1. 토목섬유의 피로균열 저항성 ...151
- 2. 토목섬유의 반사균열 저항성 ...180
- 3. 토목섬유 아스팔트 복합체의 소성변형 저항성 ...185
- 제5절 토목섬유 아스팔트 포장 시험시공 및 공용성 평가 ...199
- 1. 아스팔트 포장 덧씌우기구간의 시험포장 ...199
- 2. 아스팔트 포장 신설구간의 시험포장 ...221
- 3. 공용성 평가 ...230
- 제6절 토목섬유 아스팔트 포장의 경제성 분석 및 환경영향 평가 ...258
- 1. 경제성 분석 ...258
- 2. 환경영향 및 재활용성 검토 ...294
- 제7절 토목섬유 아스팔트 포장의 실용화 방안 ...297
- 1. 토목섬유 보강 아스팔트 포장의 시공.유지관리 지침(안) ...297
- 2. 토목섬유 아스팔트 포장 설계를 위한 방법론 ...307
- 제8절 연구 결론 ...317
- 1. 연구를 통한 발견 사항 ...317
- 2. 연구 결론 ...320
- 제4장 연구개발목표 달성도 및 관련분야에의 기여도 ...323
- 1. 연구개발목표 달성도...323
- 제5장 연구개발 결과의 활용계획 ...327
- 1. 활용용도...327
- 2. 활용계획...327
- 제6장 연구개발과정에서 수집한 해외과학기술정보 ...329
- 1. POM 지오그리드의 아스팔트 포장 보강효과...329
- 2. 아스팔트 포장 보강용 토목섬유의 성능평가 (일본대학)...329
- 3. 토목섬유 아스팔트 포장 시험시공 현장 조사 (일본 국도)...330
- 4. 도로포장용 토목섬유 종류에 따른 적용성 (일본 Nichireki 사)...331
- 5. APR Sheet 보강 아스팔트 포장...332
- 제7장 참고문헌 ...335
- 부록 A ...343
- 부록 B ...348
- 부록 C ...352
- 별첨 자체평가의견서 ...361
※ AI-Helper는 부적절한 답변을 할 수 있습니다.