본 연구에서는 키토산을 분자량별로 면직물에 처리하여 분자량에 따른 항균효과와 가공제의 세탁내구력 및 처리포의 물성을 조사하였다. 사용한 키토산은 탈아세틸화도가 85∼90%로 비슷하면서 점도가 12.9 cP, 17.2 cP, 25.8 cP, 64.6 cP로 분자량이 다른 4 종류이다. 0.1∼l.0% 농도의 키토산 용액을 실온에서 면직물에 패딩, 예비건조 및 열처리한 후 증류수에 수세, 건조하였다. 가공제 부착량은 가공처리 전, 후의 시료무게 차이로부터 계산하였다. ...
본 연구에서는 키토산을 분자량별로 면직물에 처리하여 분자량에 따른 항균효과와 가공제의 세탁내구력 및 처리포의 물성을 조사하였다. 사용한 키토산은 탈아세틸화도가 85∼90%로 비슷하면서 점도가 12.9 cP, 17.2 cP, 25.8 cP, 64.6 cP로 분자량이 다른 4 종류이다. 0.1∼l.0% 농도의 키토산 용액을 실온에서 면직물에 패딩, 예비건조 및 열처리한 후 증류수에 수세, 건조하였다. 가공제 부착량은 가공처리 전, 후의 시료무게 차이로부터 계산하였다. 항균성 측정은 공시균 Staphylococcus aureus (ATCC 6538)를 포함한 Escherichia coli (ATCC 8473), Proteus vulgaris, Klebsiella pneumoniae, Pheudomonas aeruginosa (ATCC 13388) 균주 5 종을 사용하여 쉐이크 플라스크법에 의해 행하였고, 가공제의 세탁내구력을 JIS 0217-104의 방법에 의해 실험하였다. 강연도는 ASTM D-1388-55에 따라 켄티레버법에 의해, 인장강도는 만능인장시험기를 사용하여 ASTM D-1682-64에 의해, 수분율은 ASTM D-629-59에 따라 각각 측정하였다. 키토산 분자량과 처리농도가 증가함에 따라 가공제 부착량, 강연도, 수분율은 증가하였고 인장강도 보유율은 감소하였다. SEM 분석결과 처리농도와 분자량이 낮으면 키토산이 직물표면에 비교적 균일한 필름상태로 코팅되어 있지만 처리농도와 분자량이 증가함에 따라 불균일한 코팅과 부분적 침착이 관찰되었다. S. aureus, E. coli, P. vulgaris는 분자량이 증가할수록 항균성이 증가하였고 25.8 cP 이상에서는 증가폭이 작았다. 또한 처리농도가 증가할수록 항균성이 증가하였으며 0.5% 이상에서는 증가폭이 작았다. K. pneumoniae는 분자량이 증가함에 따라 항균성이 약간 증가하였고 처리농도가 높을수록 항균성에 대한 분자량 효과가 더 뚜렷하였다. P. aeruginosa는 분자량과 처리농도에 관계없이 20∼50%의 균감소율을 보여 항균성이 낮았다. 세탁횟수가 0, 5, 10, 20 회로 증가함에 따라 내세탁성은 감소하였고, 일반적으로 분자량에 상관없이 5 회의 세탁까지 20∼41%의 급격한 균감소율 저하를 보였고 그 이상에서는 저하폭이 감소하였다. 키토산 처리액에 0.1%의 비이온성 계면활성제를 첨가한 결과 항균성은 약 40% 정도 저하되었다.
본 연구에서는 키토산을 분자량별로 면직물에 처리하여 분자량에 따른 항균효과와 가공제의 세탁내구력 및 처리포의 물성을 조사하였다. 사용한 키토산은 탈아세틸화도가 85∼90%로 비슷하면서 점도가 12.9 cP, 17.2 cP, 25.8 cP, 64.6 cP로 분자량이 다른 4 종류이다. 0.1∼l.0% 농도의 키토산 용액을 실온에서 면직물에 패딩, 예비건조 및 열처리한 후 증류수에 수세, 건조하였다. 가공제 부착량은 가공처리 전, 후의 시료무게 차이로부터 계산하였다. 항균성 측정은 공시균 Staphylococcus aureus (ATCC 6538)를 포함한 Escherichia coli (ATCC 8473), Proteus vulgaris, Klebsiella pneumoniae, Pheudomonas aeruginosa (ATCC 13388) 균주 5 종을 사용하여 쉐이크 플라스크법에 의해 행하였고, 가공제의 세탁내구력을 JIS 0217-104의 방법에 의해 실험하였다. 강연도는 ASTM D-1388-55에 따라 켄티레버법에 의해, 인장강도는 만능인장시험기를 사용하여 ASTM D-1682-64에 의해, 수분율은 ASTM D-629-59에 따라 각각 측정하였다. 키토산 분자량과 처리농도가 증가함에 따라 가공제 부착량, 강연도, 수분율은 증가하였고 인장강도 보유율은 감소하였다. SEM 분석결과 처리농도와 분자량이 낮으면 키토산이 직물표면에 비교적 균일한 필름상태로 코팅되어 있지만 처리농도와 분자량이 증가함에 따라 불균일한 코팅과 부분적 침착이 관찰되었다. S. aureus, E. coli, P. vulgaris는 분자량이 증가할수록 항균성이 증가하였고 25.8 cP 이상에서는 증가폭이 작았다. 또한 처리농도가 증가할수록 항균성이 증가하였으며 0.5% 이상에서는 증가폭이 작았다. K. pneumoniae는 분자량이 증가함에 따라 항균성이 약간 증가하였고 처리농도가 높을수록 항균성에 대한 분자량 효과가 더 뚜렷하였다. P. aeruginosa는 분자량과 처리농도에 관계없이 20∼50%의 균감소율을 보여 항균성이 낮았다. 세탁횟수가 0, 5, 10, 20 회로 증가함에 따라 내세탁성은 감소하였고, 일반적으로 분자량에 상관없이 5 회의 세탁까지 20∼41%의 급격한 균감소율 저하를 보였고 그 이상에서는 저하폭이 감소하였다. 키토산 처리액에 0.1%의 비이온성 계면활성제를 첨가한 결과 항균성은 약 40% 정도 저하되었다.
In this study, the cotton fabric was treated with chitosan solution, and then effect of molecular weight on the antimicrobial activity and the durability to laundering, performance properties of treated fabrics were examined. Four chitosans with different molecular weight having similar DAC of 85∼90...
In this study, the cotton fabric was treated with chitosan solution, and then effect of molecular weight on the antimicrobial activity and the durability to laundering, performance properties of treated fabrics were examined. Four chitosans with different molecular weight having similar DAC of 85∼90% were used ; 12.9 cP, 17.2 cP, 25.8 cP, 64.6 cP, respectively, Cotton fabrics were padded, pre-dried, cured and rinsed with distilled water. Add-on was calculated from the difference in sample weight before and after treatment. Antimicrobial activity of treated fabrics was evaluated by Shake Flask Method in terms of bacteria reduction rate. Bacteria used are Staphylococcus aureus (ATCC 6538), Escherichia coli (ATCC 8473), Proteus vulgars, Klebsiella pneumoniae, Pheudomonas aeruginosa (ATCC 13388). The durability to laundering was examined by JIS 0217-104. Stiffness, tensile strength and moisture regain were measured by Cantilevelr Method according to ASTM D-1388-55, ASTM D-1682-64 and ASTM D-629-59, respectively. As chitosan molecular weight and treatment concentration increased, add-on, stiffness and moisture regain increased and tensile strength retention decreased. According to SEM analysis, chitosan was coated as relatively uniform film on the fabric surface at low molecular weight and treatment concentration. As molecular weight and treatment concentration increased, uneven coating and partial deposition of chitosan were observed. Antimicrobial activity of chitosan against S. aureus, E. coli, P. vulgaris was increased sharply with the increase of molecular weight up to 25.8 cP and treatment concentration 0.5% respectively, and then slowly thereafter. As molecular weight increased, antimicrobial activity against K. pneumoniae slightly increased. Molecular effect on the antimicrobial activity appeared remarkably at lower treatment concentration. Reduction rates of P. aeruginosa were in t]he range of 20∼50% regardless of molecular weight and treatment concentration. As laundering cycles increase, durability to laundering was decreased. Durability to laundering showed 20∼41% of reduction rates after 5 laundering cycles regardless of molecular weight and then slowly decreased thereafter. Addition of 0.1% wetting agent in the finishing bath affected antimicrobial activity of chitosan negatively.
In this study, the cotton fabric was treated with chitosan solution, and then effect of molecular weight on the antimicrobial activity and the durability to laundering, performance properties of treated fabrics were examined. Four chitosans with different molecular weight having similar DAC of 85∼90% were used ; 12.9 cP, 17.2 cP, 25.8 cP, 64.6 cP, respectively, Cotton fabrics were padded, pre-dried, cured and rinsed with distilled water. Add-on was calculated from the difference in sample weight before and after treatment. Antimicrobial activity of treated fabrics was evaluated by Shake Flask Method in terms of bacteria reduction rate. Bacteria used are Staphylococcus aureus (ATCC 6538), Escherichia coli (ATCC 8473), Proteus vulgars, Klebsiella pneumoniae, Pheudomonas aeruginosa (ATCC 13388). The durability to laundering was examined by JIS 0217-104. Stiffness, tensile strength and moisture regain were measured by Cantilevelr Method according to ASTM D-1388-55, ASTM D-1682-64 and ASTM D-629-59, respectively. As chitosan molecular weight and treatment concentration increased, add-on, stiffness and moisture regain increased and tensile strength retention decreased. According to SEM analysis, chitosan was coated as relatively uniform film on the fabric surface at low molecular weight and treatment concentration. As molecular weight and treatment concentration increased, uneven coating and partial deposition of chitosan were observed. Antimicrobial activity of chitosan against S. aureus, E. coli, P. vulgaris was increased sharply with the increase of molecular weight up to 25.8 cP and treatment concentration 0.5% respectively, and then slowly thereafter. As molecular weight increased, antimicrobial activity against K. pneumoniae slightly increased. Molecular effect on the antimicrobial activity appeared remarkably at lower treatment concentration. Reduction rates of P. aeruginosa were in t]he range of 20∼50% regardless of molecular weight and treatment concentration. As laundering cycles increase, durability to laundering was decreased. Durability to laundering showed 20∼41% of reduction rates after 5 laundering cycles regardless of molecular weight and then slowly decreased thereafter. Addition of 0.1% wetting agent in the finishing bath affected antimicrobial activity of chitosan negatively.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.