본 논문은 개선된 Wilkinson 결합기로 기존의 Wilkinson 결합기의 문제인 주파수 문제점, branchline 사이의 칩저항 위치 문제점 등을 개선시켰고, 설계시 X-band 이상에서 폭이 넓고 낮은 임피던스를 갖는 선로를 반원의 형태로 구부리기가 어려웠던 문제점을 개선하였다. 회로 설계는 초고주파(microwave) 전용 CAD 시뮬레이션(simulation)인 MDS를 사용하였다. 본 논문에서 설계하고자 했던 3dB결합기로 구성된 평형 증폭기는 사용 소자가 ...
본 논문은 개선된 Wilkinson 결합기로 기존의 Wilkinson 결합기의 문제인 주파수 문제점, branchline 사이의 칩저항 위치 문제점 등을 개선시켰고, 설계시 X-band 이상에서 폭이 넓고 낮은 임피던스를 갖는 선로를 반원의 형태로 구부리기가 어려웠던 문제점을 개선하였다. 회로 설계는 초고주파(microwave) 전용 CAD 시뮬레이션(simulation)인 MDS를 사용하였다. 본 논문에서 설계하고자 했던 3dB결합기로 구성된 평형 증폭기는 사용 소자가 ATF 13736 GaAs FET이고, 주파수 대역은 14∼14.5 GHz이다. 개선된 Wilkinson 결합기의 설계에서는 입력 신호에 대해 3dB 출력 신호를 갖도록 하였으며, 출력 포트간의 isolation을 개선시켰다. 본 논문에서는 단일 증폭기와 개선된 Wilkinson 결합기를 이용한 평형증폭기를 제작하여 실험한 결과 단일 증폭기에 비해 출력 반사 손실이 우수하며 tuning 작업이 간단하고, 안정적이고 신뢰도가 우수하다는 것을 알 수 있었다.
본 논문은 개선된 Wilkinson 결합기로 기존의 Wilkinson 결합기의 문제인 주파수 문제점, branchline 사이의 칩저항 위치 문제점 등을 개선시켰고, 설계시 X-band 이상에서 폭이 넓고 낮은 임피던스를 갖는 선로를 반원의 형태로 구부리기가 어려웠던 문제점을 개선하였다. 회로 설계는 초고주파(microwave) 전용 CAD 시뮬레이션(simulation)인 MDS를 사용하였다. 본 논문에서 설계하고자 했던 3dB결합기로 구성된 평형 증폭기는 사용 소자가 ATF 13736 GaAs FET이고, 주파수 대역은 14∼14.5 GHz이다. 개선된 Wilkinson 결합기의 설계에서는 입력 신호에 대해 3dB 출력 신호를 갖도록 하였으며, 출력 포트간의 isolation을 개선시켰다. 본 논문에서는 단일 증폭기와 개선된 Wilkinson 결합기를 이용한 평형증폭기를 제작하여 실험한 결과 단일 증폭기에 비해 출력 반사 손실이 우수하며 tuning 작업이 간단하고, 안정적이고 신뢰도가 우수하다는 것을 알 수 있었다.
The improved Wilkinson combiner studied in this paper has made up for the faults of the existing Wilkinson combiner; the frequency fault, the fault that the chip resistance differs according to its positions on the branchline. The improved Wilkinson combiner has also relieved the difficulty of bendi...
The improved Wilkinson combiner studied in this paper has made up for the faults of the existing Wilkinson combiner; the frequency fault, the fault that the chip resistance differs according to its positions on the branchline. The improved Wilkinson combiner has also relieved the difficulty of bending the branchline which has wide and low impedances into the shape of a semicircle above X-band. I had designed the circuit, using MDS, that is CAD simulation which has been used only for microwave. The balanced amplifier which I had tried to design in this paper is composed of 3dB combiner, uses the device of ATF 13736 GaAs FET, and its frequency band is from 14 to 14.5 GHz. The improved Wilkinson combiner is designed to have a 3dB output signal to an input signal, and improves isolation between the output ports. When I had made a balanced amplifier using single amplifiers and the improved Wilkinson combiners and experimented it, I had attained the desired effect that it has, as compared with a single amplifier, better output return loss, and it is not only tuned more easily, but more stable and reliable.
The improved Wilkinson combiner studied in this paper has made up for the faults of the existing Wilkinson combiner; the frequency fault, the fault that the chip resistance differs according to its positions on the branchline. The improved Wilkinson combiner has also relieved the difficulty of bending the branchline which has wide and low impedances into the shape of a semicircle above X-band. I had designed the circuit, using MDS, that is CAD simulation which has been used only for microwave. The balanced amplifier which I had tried to design in this paper is composed of 3dB combiner, uses the device of ATF 13736 GaAs FET, and its frequency band is from 14 to 14.5 GHz. The improved Wilkinson combiner is designed to have a 3dB output signal to an input signal, and improves isolation between the output ports. When I had made a balanced amplifier using single amplifiers and the improved Wilkinson combiners and experimented it, I had attained the desired effect that it has, as compared with a single amplifier, better output return loss, and it is not only tuned more easily, but more stable and reliable.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.