급속한 산업의 발달에 따라 고분자의 수요량이 기하급수적으로 증가되어 왔으며 이들의 응용범위가 다양해지면서 물성에 대한 많은 연구가 진행되고 있다. 그러나 최근 들어 그 용도가 광범위하기 때문에 파생되는 문제 또한 적지 않다. 그 중 폐기물에 의한 환경문제로 인하여 이를 효과적으로 처리하지 않으면 안되게 되었다. 본 연구에서는 폴리스타이렌의 농도가 1, 4, 8 (w/v) %가 되도록 THF에 녹이고 273.15K, 293.15K, 313.15K의 온도로 조절된 반응기에 충진시킨 후 20 KHz의 주파수를 갖는 초음파를 조사시키며 일정한 시간 간격으로 시료를 채취하여 GPC로 분석하였다. GPC분석 결과로부터 분해정도를 확인하기 위하여 각 농도, 온도에 따른 분자량 감소를 초기에 나타난 수평균 분자량에 조사시간에 따라 측정된 수평균 분자량의 비인 degradation index(...
급속한 산업의 발달에 따라 고분자의 수요량이 기하급수적으로 증가되어 왔으며 이들의 응용범위가 다양해지면서 물성에 대한 많은 연구가 진행되고 있다. 그러나 최근 들어 그 용도가 광범위하기 때문에 파생되는 문제 또한 적지 않다. 그 중 폐기물에 의한 환경문제로 인하여 이를 효과적으로 처리하지 않으면 안되게 되었다. 본 연구에서는 폴리스타이렌의 농도가 1, 4, 8 (w/v) %가 되도록 THF에 녹이고 273.15K, 293.15K, 313.15K의 온도로 조절된 반응기에 충진시킨 후 20 KHz의 주파수를 갖는 초음파를 조사시키며 일정한 시간 간격으로 시료를 채취하여 GPC로 분석하였다. GPC분석 결과로부터 분해정도를 확인하기 위하여 각 농도, 온도에 따른 분자량 감소를 초기에 나타난 수평균 분자량에 조사시간에 따라 측정된 수평균 분자량의 비인 degradation index(DI)로 나타내었다. 또한 Schulz분포함수와 log-normal 분포함수를 이용하여 각 분자량에 따라 연속 분포함수를 표현함으로써 분자량의 감소를 확인하였다. 실험한 결과에 따르면 초음파에 의한 폴리스타이렌의 분해율은 온도가 낮을수록 그리고 농도가 낮을수록 빨라짐을 알 수 있었으며 이상의 결과로부터 용매 내에서 높아지는 마찰력과 cavitation의 영향으로 고분자 사슬의 절단이 일어난다는 것을 알 수 있었다.
급속한 산업의 발달에 따라 고분자의 수요량이 기하급수적으로 증가되어 왔으며 이들의 응용범위가 다양해지면서 물성에 대한 많은 연구가 진행되고 있다. 그러나 최근 들어 그 용도가 광범위하기 때문에 파생되는 문제 또한 적지 않다. 그 중 폐기물에 의한 환경문제로 인하여 이를 효과적으로 처리하지 않으면 안되게 되었다. 본 연구에서는 폴리스타이렌의 농도가 1, 4, 8 (w/v) %가 되도록 THF에 녹이고 273.15K, 293.15K, 313.15K의 온도로 조절된 반응기에 충진시킨 후 20 KHz의 주파수를 갖는 초음파를 조사시키며 일정한 시간 간격으로 시료를 채취하여 GPC로 분석하였다. GPC분석 결과로부터 분해정도를 확인하기 위하여 각 농도, 온도에 따른 분자량 감소를 초기에 나타난 수평균 분자량에 조사시간에 따라 측정된 수평균 분자량의 비인 degradation index(DI)로 나타내었다. 또한 Schulz분포함수와 log-normal 분포함수를 이용하여 각 분자량에 따라 연속 분포함수를 표현함으로써 분자량의 감소를 확인하였다. 실험한 결과에 따르면 초음파에 의한 폴리스타이렌의 분해율은 온도가 낮을수록 그리고 농도가 낮을수록 빨라짐을 알 수 있었으며 이상의 결과로부터 용매 내에서 높아지는 마찰력과 cavitation의 영향으로 고분자 사슬의 절단이 일어난다는 것을 알 수 있었다.
According to the rapid industrial development, there has been enormous growth in consumption of polymer. Therefore, many use of polymer has studied for large application. Among those, the effective treatment of the waste polymer is necessary for the good environment. In this study, polystyrene in te...
According to the rapid industrial development, there has been enormous growth in consumption of polymer. Therefore, many use of polymer has studied for large application. Among those, the effective treatment of the waste polymer is necessary for the good environment. In this study, polystyrene in tetrahydrofuran solution was irradiated using the ultrasound apparatus(20 kHz) and then GPC was used to measure the molecular weight change with ultrasound irradiation time under a variety of experimental condition. Each of sample prepared 1, 4 and 8 (w/v) % and filled the reactor which temperature set up to 273.15, 293.15, and 313.15K. In the basis of the analytic results, the extent of molecular weight at each temperature and concentration expressed in terms of degradation index(DI), the ratio of the number of chain broken to those initially present. Continuous distribution function was predicted as a function of molecular weight by using Schulz distribution function on the basis of acquired data. From the experimental results, we suggested that ultrasound degradation of polystyrene was improved by lower temperature and lower concentration. And breakage of polymer chain was caused by frictional force arising between solvent molecules and cavitation.
According to the rapid industrial development, there has been enormous growth in consumption of polymer. Therefore, many use of polymer has studied for large application. Among those, the effective treatment of the waste polymer is necessary for the good environment. In this study, polystyrene in tetrahydrofuran solution was irradiated using the ultrasound apparatus(20 kHz) and then GPC was used to measure the molecular weight change with ultrasound irradiation time under a variety of experimental condition. Each of sample prepared 1, 4 and 8 (w/v) % and filled the reactor which temperature set up to 273.15, 293.15, and 313.15K. In the basis of the analytic results, the extent of molecular weight at each temperature and concentration expressed in terms of degradation index(DI), the ratio of the number of chain broken to those initially present. Continuous distribution function was predicted as a function of molecular weight by using Schulz distribution function on the basis of acquired data. From the experimental results, we suggested that ultrasound degradation of polystyrene was improved by lower temperature and lower concentration. And breakage of polymer chain was caused by frictional force arising between solvent molecules and cavitation.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.