철근콘크리트의 처짐에 관한 비교 연구 : 1982 한국규준과 ACI-code 318-83의 비교‧연구 (A) Comparision Study on deflection of Reinforced Concrete Beam : A Comparision Study on 1982 Korean Provision and ACI-code 318-83원문보기
철근콘크리트보의 처짐계산에 있어서 1982 한국규준과 ACI-code 318-83의 차이점은 철근의 탄성계수와 콘크리트의 탄성계수, 탄성계수비, 유효단면 2차모멘트인데 여기에 따라 처짐량도 차이가 난다. 특히 유효단면2차모멘트의 결정에 있어서 1982한국규준은 인장 철근비와 철근의 항복강도를 곱한 값으로써 35.2kg/㎠보다 클때는 유효단면2차모멘트를 균열등가단면2차모멘트로 결정하고 35.2kg/㎠보다 같거나 작을때는 등가전단면2차모멘트를 사용한다. 그러나 ACI-code 318-83은 유효단면2차모멘트의 결정에 있어서 ...
철근콘크리트보의 처짐계산에 있어서 1982 한국규준과 ACI-code 318-83의 차이점은 철근의 탄성계수와 콘크리트의 탄성계수, 탄성계수비, 유효단면 2차모멘트인데 여기에 따라 처짐량도 차이가 난다. 특히 유효단면2차모멘트의 결정에 있어서 1982한국규준은 인장 철근비와 철근의 항복강도를 곱한 값으로써 35.2kg/㎠보다 클때는 유효단면2차모멘트를 균열등가단면2차모멘트로 결정하고 35.2kg/㎠보다 같거나 작을때는 등가전단면2차모멘트를 사용한다. 그러나 ACI-code 318-83은 유효단면2차모멘트의 결정에 있어서 고정하중에 의한 처짐을 계산할 때와 고정하중과 적재하중에 의한 처짐을 계산할 때 마다 휨모멘트에 균열모멘트를 나눈값을 중심으로 유효단면 2차모멘트를 전단면2차모멘트나 혹은 방정식 (9-7)로 결정한다. 처짐량의 차이는 하중이 같을때, 1982 한국규준을 중심으로 P(t)·F(y)가 35.2kg/㎠보다 클 때는 1982 한국규준의 처짐량이 ACI-code 318-83의 처짐량보다 크고 P(t)·F(y)가 35.2kg/㎠보다 작을 때는 1982 한국규준의 처짐량이 ACI - code 318-83의 처짐량보다 작다. 이러한 처짐량의 차이는 유효단면2차모멘트의 결정에 따라 달라진다.
철근콘크리트보의 처짐계산에 있어서 1982 한국규준과 ACI-code 318-83의 차이점은 철근의 탄성계수와 콘크리트의 탄성계수, 탄성계수비, 유효단면 2차모멘트인데 여기에 따라 처짐량도 차이가 난다. 특히 유효단면2차모멘트의 결정에 있어서 1982한국규준은 인장 철근비와 철근의 항복강도를 곱한 값으로써 35.2kg/㎠보다 클때는 유효단면2차모멘트를 균열등가단면2차모멘트로 결정하고 35.2kg/㎠보다 같거나 작을때는 등가전단면2차모멘트를 사용한다. 그러나 ACI-code 318-83은 유효단면2차모멘트의 결정에 있어서 고정하중에 의한 처짐을 계산할 때와 고정하중과 적재하중에 의한 처짐을 계산할 때 마다 휨모멘트에 균열모멘트를 나눈값을 중심으로 유효단면 2차모멘트를 전단면2차모멘트나 혹은 방정식 (9-7)로 결정한다. 처짐량의 차이는 하중이 같을때, 1982 한국규준을 중심으로 P(t)·F(y)가 35.2kg/㎠보다 클 때는 1982 한국규준의 처짐량이 ACI-code 318-83의 처짐량보다 크고 P(t)·F(y)가 35.2kg/㎠보다 작을 때는 1982 한국규준의 처짐량이 ACI - code 318-83의 처짐량보다 작다. 이러한 처짐량의 차이는 유효단면2차모멘트의 결정에 따라 달라진다.
In the deflection calculation of a reinforced conerete beam, the difference of 1982 Korean provision and ACI-code 318-83 are elastic modulus of steel bar and concrete, elastic modulus ratio and effective moment of inertia. And the deflection make difference in accodence with this. Particulary, in th...
In the deflection calculation of a reinforced conerete beam, the difference of 1982 Korean provision and ACI-code 318-83 are elastic modulus of steel bar and concrete, elastic modulus ratio and effective moment of inertia. And the deflection make difference in accodence with this. Particulary, in the decision effective moment of inertia 1982 Korean provision-decides upon moment of transformed cracked cross section for effective moment of inertia in case P(t).F(y) > 35.2kg/㎠ and decides upon moment of inertia of transformed gross section including on area of steel bar for effective moment of inertia in case P(t).F(y) <= 35.2kg/㎠. But ACI-code 318-83 decides upon, in the decision of effective moment of inertia, when deflection calculates for dead load and when deflection calculates for dead load and live load, moment of inertia of gross section neglecting area of steel bar or equation(9-7), with as the central figure cracking moment divided by bending moment gives value. In case load is equal, with as the central figure 1982 Korean provision, the difference of deflection larges 1982 Korean provision than ACI-code 318-83 in case P(t).F(y) > 35.2kg/㎠ and 1982 Korean provesion is few than ACI-code 318-83 in case P(t).F(y) <= 35.2kg/㎠. Such the difference of deflection changes to in accodance with decision of effective moment of inetia.
In the deflection calculation of a reinforced conerete beam, the difference of 1982 Korean provision and ACI-code 318-83 are elastic modulus of steel bar and concrete, elastic modulus ratio and effective moment of inertia. And the deflection make difference in accodence with this. Particulary, in the decision effective moment of inertia 1982 Korean provision-decides upon moment of transformed cracked cross section for effective moment of inertia in case P(t).F(y) > 35.2kg/㎠ and decides upon moment of inertia of transformed gross section including on area of steel bar for effective moment of inertia in case P(t).F(y) <= 35.2kg/㎠. But ACI-code 318-83 decides upon, in the decision of effective moment of inertia, when deflection calculates for dead load and when deflection calculates for dead load and live load, moment of inertia of gross section neglecting area of steel bar or equation(9-7), with as the central figure cracking moment divided by bending moment gives value. In case load is equal, with as the central figure 1982 Korean provision, the difference of deflection larges 1982 Korean provision than ACI-code 318-83 in case P(t).F(y) > 35.2kg/㎠ and 1982 Korean provesion is few than ACI-code 318-83 in case P(t).F(y) <= 35.2kg/㎠. Such the difference of deflection changes to in accodance with decision of effective moment of inetia.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.